Ventilex    West Chester, OH 45069
Apr 26, 2007 Utilizing 2 exhaust air streams, Ventura 130(TM) Fluid Bed Dryer/Cooler captures and re-uses latent heat. One off cooling section is at 110°F, while one off heat exchangers/heat recovery units is 95°F. With this concept, lowest possible amount of energy is used for drying. In most applications of 4% moisture and above, dryer will use approximately 1,200 BTU/lb of water evaporated or less.

Dometic Corp., The    Elkhart, IN 46516
Apr 20, 2007 Run on 12 V power from truck batteries, auxiliary cooling and heating system consists of 7,000 or 10,000 BTU split or self-contained air conditioning system, DC/AC inverter, alternator, and optional shorepower pass-through. Quiet operation is ensured because no separate diesel auxiliary power unit is required. Batteries are kept fully charged whenever truck is running, and system meets federal, state, and local clean-air requirements.

Scott Brothers Ltd    Cheshire, CW10 9LT   United Kingdom
Mar 27, 2007 Operating with windows and doors open, Bioclimatic Convair Appliances provide cooling without refrigerant chemicals and end-of-life disposal problems. Using less energy than one 100 W light bulb, units are lightweight so they can be repositioned. Air conditioners come in white and titanium to suit varying design requirements.

Thermo Fisher Scientific    Waltham, MA 02454
Mar 20, 2007 Able to maintain temperatures from 5-40°C, ThermoFlex(TM) 900 and 1400 respectively deliver up to 900 and 1,400 W of continuous cooling capacity. Recirculation system features integrated funnel, full flow filtration, and visual fluid level indication. Air and fluid filters can be changed during operation, and integrated intelligence enables issues to be detected before impacting processes. Systems offer pumping capacities to 4.1 gpm and adjustable pressure to 100 psi.

Unifin International, Inc.    London, ON N6A4P4
Mar 19, 2007 Installed on transformer, ForZair(TM) HeatSink auxiliary coolers immediately reduce temperature of dielectric cooling oil. Units can be transferred from one overloaded substation to another, providing relief wherever it is needed most. They employ mono-aluminum extruded fin-tubes and Cardinal transformer oil pumps with glandless design that prevents leaks. To augment cooling on 1-60 Mva OA, FA, or FOA transformers, coolers come ready for fully self-contained operations.

AMETEK Test & Calibration Instruments    Largo, FL 33773
Mar 08, 2007 Capable of reaching temperatures from -90 to +125°C, JOFRA(TM) ATC-125 Ultra Cooler incorporates ATC Series dual-zone control technology to ensure precise temperature homogeneity throughout calibration well. Unit achieves cryogenic temperatures through Free Piston Stirling Cooler technology, which consists of Stirling heat pump in 290 g, compact unit. Helium gas acts as heat transport medium, while mains power variance immunity technology promotes temperature stability.

TEK-TEMP INSTRUMENTS, INC    Croydon, PA 19021
Mar 05, 2007 Available with cooling capacities up to 4,800 BTU/hr, LK-20 Series features low-profile design that permits installation in space-restricted areas. Series measures 15 in. high (17 1/8 in. with casters) and offers self-contained and tethered controllers that provide stability to 0.1°C over 5 to 35°C range (up to 80°C with heater option). All-stainless steel plumbing and cabinets are compatible with many process fluids and operating environments.

Dometic Corp., The    Elkhart, IN 46516
Feb 27, 2007 Self-contained, water-cooled Turbo Series includes multiple models ranging from 6,000-16,000 btu. Design incorporates positive-flow composite condensate drain pan that minimizes standing water, and centrifugal enclosed-motor HV blower that can be rotated up to 270° with single-screw adjustment for discharge in any direction. Built-in isolation mounting system minimizes vibration and noise.

Emerson Network Power    St. Louis, MO 63136
Feb 15, 2007 Liebert TCDV air-cooled, direct-drive refrigeration condenser, suited for cooling systems with dual refrigeration circuits, features variable-frequency drive that controls speed of primary fan based on refrigerant pressure variations. Pressure control can be maintained for outdoor ambient temperatures as low as -20°F, and unit can respond to changes as small as ±1°F and ±1% RH. Condenser also features transient voltage surge suppression to protect electronics.

Mokon    Buffalo, NY 14207
Feb 13, 2007 Available in 10-500 ton capacities, Outdoor Air-Cooled Central Chillers incorporate microprocessor-based chiller control technology. Chillers are factory wired and tested, and arrive on site in complete working order. Units feature air-cooled condenser with direct drive vertical condenser fans, and operate in outdoor ambient temperature range of 0-115°F.

EXAIR Corporation    Cincinnati, OH 45249-1621
Feb 01, 2007 Producing stream of 20°F air, High Power Cold Gun is suitable for continuous use without possibility of freezing up. Stainless steel vortex tube converts ordinary supply of compressed air into cold air, while flexible ball and socket hose directs cold air to point where heat is generated. Eliminating filtration, clean-up, and disposal of liquid coolants, gun is suited for laser cutting, tool sharpening, drill and cutter grinding, milling, drilling, and band sawing.

American Power Conversion    West Kingston, RI 02892
Feb 01, 2007 Placed next to heat source in data centers and small computer rooms, InfraStruXure® InRow(TM) RP supports power densities up to 70 kW per rack when used with hot air containment systems and comes in chilled water- and refrigerant-based designs. Varying cooling capacity with heat load requirements conserves energy during partial load conditions, and integrated humidifier provides room-level moisture control. Control algorithm enables real-time capacity monitoring.

Daikin Europe N.V.    Oostende 8400  Belgium
Jan 24, 2007 Built around scroll compressors, R-407C operated UAT(Y)P Series includes heat pump and cooling only models with capacities of 16.7-109.6 kW and 17.3-121.6 kW, respectively. Operating temperatures are 20-46°C in cooling mode and -15 to 20°C in heating mode. Belt-driven fans allow adjustment of air volume and static pressure as required. Featuring electronic remote control with 15 hr delay timer, units are suited for supermarkets, warehouses, factories, and restaurants.

AERCO International, Inc.    Northvale, NJ 07647
Jan 23, 2007 KC1000 high-efficiency boilers and water heaters support sealed combustion in all climates and can be configured to support dual fuel applications. Using natural gas, 78 x 22 x 57 in. units maintain low NOx emissions over entire 11:1 operating range, and can be used in single unit or modular arrangements. One million BTU/hr condensing units feature control software that integrates with BAS/EMS systems and can be accessed remotely.

Nocord    Richmond, VA 23224
Jan 10, 2007 Utilizing centrifugal fan, SummerSeat pulls in fresh air to cool back and bottom of driver or passenger. Foam cushioning, microfiber mesh, and Eva(TM) Cooling Plastic promotes cool air flow, while adjustable cooling control lets user set desired level of comfort. Product draws minimal power from vehicle's battery and has energy saving automatic shut-off timer that deactivates seat every hour. Optional ac adapter is available for office use.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Dec 29, 2006 Capable of controlling cooling fluid temperature based on machine or room temperature, DURACHILL Chillers offer cooling capacities up to 187,920 BTU/hr and are suitable for metalworking applications. Standard units include air or water-cooled condensers, 1½-15 hp compressor, and 1-touch temperature control with LED readout. Models with 1½-3 hp compressors are suitable for process temperatures from 41-95°F, while larger models handle process temperatures from 32-86°F.

Dometic Corp., The    Elkhart, IN 46516
Dec 22, 2006 Marine Air SVCD30 is supplied in seawater-cooled, framed package with single 30,000 BTU compressor/condenser and dual 16,000 BTU evaporator/blower assemblies mounted back-to-back on one chassis. Self-contained for limited-space applications, this 30,000 BTU unit draws return air from 1 or 2 compartments across both evaporator coils and ducts discharge air to 2 or more spaces. Stainless-steel chassis and Heresite coating for exposed components lend to corrosion resistance.

Dometic Corp., The    Elkhart, IN 46516
Dec 20, 2006 Developed for jack-up boats and barges, 14,000 BTU air-cooled Model SSA14K includes compressor, evaporator, blower, and other mechanical and electrical components on single chassis that is bolted directly to deck. Built-in return-air and discharge-air plenums cool compartment directly below without duct runs. Chassis and enclosure are stainless steel, while condenser and other components are Heresite-coated for additional corrosion protection.

Dometic Corp., The    Elkhart, IN 46516
Dec 14, 2006 Designed for circulated-water air conditioning systems, Model MTS25-2 chiller module features hermetic scroll compressor and shell-and-tube marine-grade cupronickel condenser, along with other mechanical and electrical components, on single chassis. With space-saving design that facilitates installation in tight spaces, 25-ton unit also provides front access to condenser tubes, heater rods, flow switch, compressor and replaceable drier cores for repair and maintenance.

Celsia Technologies    Miami, FL 33131
Dec 07, 2006 Iceon(TM) 1000CG graphics card cooling product offers manufacturers of graphics cards, boards, and PCs quiet operation while maintaining very low temparatures. Product includes fan packaged with NanoSpreader(TM) thin and light heat spreader technology, which enables slow fan speeds to increase fan life and decrease noise.