Bell & Gossett
Morton Grove, IL 60053
Jun 02, 2006 Suited for residential and light commercial heating systems, Models NRF-36 and NRF-45 are equipped with 3-speed motors, which allow pumps to cover wide range of hydraulic capabilities. Units include DuraGlide(TM) Bearing System, heat-resistant and non-metallic closed impeller, and self-cleaning particle shield.

EXAIR Corporation
Cincinnati, OH 45249-1621
May 18, 2006 Side Mount Kits for Cabinet Coolers enable mounting to side of electrical enclosure for applications where top mounting is not possible due to limited space or obstructions. Coolers circulate 20°F air throughout enclosure, protecting sensitive electronics from heat, dirt, and moisture while maintaining NEMA 4/4X rating of enclosure. Side Mount Kits are suited for large or small electrical enclosures with Cabinet Coolers having capacities to 2,800 btu/hr.

Polymer Laboratories, Inc.
Amherst, MA 01002
May 12, 2006 Evaporative Light Scattering Detector, Model PL-ELS 2100, is available with optional Integrated Cooled Evaporator, Model PL-ELS 2100 Ice, which operates at temperatures down to 10°C to meet requirements for pharmaceutical analysis of non-UV absorbing, low molecular weight, semi-volatile analytes. Addition of evaporation gas not only allows low temperature operation with aqueous mobile phases, but also facilitates removal of water at sub-ambient temperatures.

Steril-Aire, Inc.
Burbank, CA 91504
May 11, 2006 Packaged Terminal Air Conditioning UVC Kit contains 24 in. UVC Emitter(TM) and power supply, plus all necessary hardware components to retrofit PTAC coil or other room unit with UVC. Installed opposite coil, UVC energy provides continuous, non-chemical coil cleaning, optimizing airflow, temperature, and humidity control. It also stops mold and bacteria at source, as well as viruses and other airborne microorganisms, preventing spread of infectious diseases.

Hoffman
Anoka, MN 55303 1778
May 10, 2006 Equipped with head pressure control, compressor heater, and coated condenser/thermostat, T Series Indoor/Outdoor Air Conditioners protect electronic controls and equipment from potential failure caused by heat, humidity, dust, and other contaminants. Six models are available with varying footprints and capacities, from 15.75 x 7.50 x 6.30 in. 800 BTU Model T15 for wall-mount or narrow side wall enclosures, to large 52.85 x 20.85 x 13 in. 20,000 BTU Model T53.

Pfannenberg
Lancaster, NY 14086
May 02, 2006 Offered in NEMA 12, NEMA 3R/4, and stainless steel NEMA 4/4X versions, DTS 3000 Series cools electrical and electronic enclosure applications in various industries. Capacities range from 4,000-20,000 BTU, and operating voltages are 115, 230, and 460 Vac. While stainless steel NEMA 4/4X unit is suited for all wash-down related applications, all units feature unobstructed airflow management for optimized cooling performance and energy management.

ITW Vortec
Cincinnati, OH 45242-4719
Apr 27, 2006 Suited for NEMA Type 4 and 4X rated electrical cabinets, UL listed, Vortex A/C(TM) cooling systems are available in 3 models that deliver 900, 1,500, or 2,500 Btu/hr. Units feature noise levels of 62 dBA and operate in environments up to 175°F. Vortex tube technology converts filtered compressed air into low pressure, refrigerated air stream.

Daikin America, Inc.
Orangeburg, NY 10962
Apr 24, 2006 Available in 5, 6, and 7 kW capacities, chiller is available as EWAQ (cooling only) and EWYQ (heat pump) for small industrial and process applications. It can supply chilled water from 4° to 200°C or hot water from 30° to 500°C at ambient temperatures between -15° and +460°C. In addition to 6 L capacity expansion tank, chiller features remote LCD controller, PE-coated heat exchanger fins, swing compressor, 3-speed water circulating pump, gauges, valves, flow switch, and filter,

Thermo Electron Corp.
Waltham, MA 02454
Apr 19, 2006 Utilizing environmentally friendly HFC refrigerant, NESLAB ThermaFlex(TM) Chiller features air and fluid filters that can be changed during operation, resulting in zero downtime. Recirculation system includes integrated funnel, full flow filtration, and visual fluid level indication as well as configurable options to suit application requirements. Intuitive controller allows customer-defined alarms to be set for various parameters, alerting users of potential problems.

Daikin America, Inc.
Orangeburg, NY 10962
Mar 16, 2006 Incorporating single screw compressors with motor, EWWD range of chillers are optimized for use with R-134a refrigerant. Products are available in 7 different sizes with capacities ranging from 360 kW to 1.1 MW, and EER values from 5.2-5.35 at full load. Chilled water is supplied between 4-16°C with leaving condenser water temperature between 30-50°C. Chillers modulate sliding valve position and enable compressor to match capacity requirements.

Sterling
New Berlin, WI 53151
Mar 03, 2006 SSC-WT Pinnacle chiller is available in 30-100 ton capacities, in air and water cooled packages, and with brazed plate evaporators and SS reservoir tank. Independent refrigerant circuits allow maintenance without downtime and compressor staging provides capacity control. Unit includes fork lift slots, epoxy coated shell and tube condensers, and Allen-Bradley PLC screen for process control. Other features include alarm condition indicators and hour meters.

Carltex Inc
Greenlawn, NY 11740
Feb 27, 2006 Designed for use in pharmaceutical plants and clean rooms, Sanitary Sample Coolers are constructed of polished 316L SS to take samples from steam or heated water systems for chemistry/TOC, conductivity, and microbiological studies. Available both fixed or portable, cooler includes bracket for wall mounting and can be steam sterilized or de-pyrogenated using a hot air process.

LNS America Inc.
Cincinnati, OH 45245
Feb 17, 2006 Configurable to specific Swiss-style cutting machines and applications, PowerStream BF models offer flow rates from 4-10 gpm, 1,000 or 2,000 psi, and work in new installations as well as retrofits. Compact design allows placement beneath LNS bar feed, and PLC-based control with multi-port capability supports variety of operations. Available options include extra capacity coolant tanks and heat exchangers.

LG Electronics USA, Inc.
Englewood Cliffs, NJ 07632
Jan 30, 2006 ART COOL picture-frame air conditioner allows users to display 17 x 17 in. printed image under transparent front panel. Duct-free air conditioner features wall-mounted evaporator, 3-way airflow with computer-controlled vanes, plasma air purifying system, and dehumidifier to remove excess moisture from interior spaces. It also offers jet cool option that can cool a room in 30 minutes, auto restart, sleep mode function, and 24-hr timer.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Jan 24, 2006 Fabricated from lightweight extruded aluminum, maxiFLOW(TM) heat sinks are utilized for cooling BGAs and hot components inside electronic systems. Featuring low profile spread fin arrays to enable convectional air cooling within restricted/low air flow conditions, they are available in lengths and widths ranging from 10 x 10 mm to 60 x 60 mm, and heights starting at 2 mm.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Dec 21, 2005 ChillyBits(TM) cools metals, plastics, wood, rubber, ceramics, and other materials during machining using compressed air. Suited for industrial spot cooling, product eliminates mist coolants and heat-related parts growth. Portable unit does not use electricity, has no moving parts, and features adjustable tip for precision airflow. OSHA-compliant regarding noise and dead end pressure specs, product is suited for use in various industrial operations.

Emerson Network Power
St. Louis, MO 63136
Dec 21, 2005 Available in 53, 70, 77, and 105 kW downflow units, Liebert DS system controls temperature, air quality, and humidity in areas such as data centers and computer rooms. It uses digital scroll compressors and Liebert Paradenser(TM), which can be installed using traditional refrigerants and transitioned to green refrigerants with no loss in capacity. Also included, iCOM(TM) control system enables inter-unit coordination and provides diagnostics and service capabilities.

AEC, Inc.
Wood Dale, IL 60191
Dec 09, 2005 Offered in 30-100 ton capacities, Pinnacle Series is available in air-cooled and water-cooled packages, featuring brazed plate evaporators and stainless steel reservoir tank. Independent refrigerant circuits allow maintenance without downtime, while compressor staging provides capacity control. Chiller includes Allen Bradley PLC screen for control of up to 4 compressors in 2 circuits, hour meters to accumulate run time, and alarm condition indicators.

Sterling
New Berlin, WI 53151
Dec 08, 2005 Eliminating oil and oil-bearing parts, 35 in. wide Series RTCW features digitally controlled magnetic bearing system, consisting of both permanent magnets and electromagnets. It utilizes 2 independent centrifugal compressor circuits, shell and tube evaporator, and condenser components ranging from 120-190 ton capacity. Touch-screen controller allows user to retain cause of current fault and display last 25 fault conditions for troubleshooting.

Carman Industries Inc.
Jeffersonville, IN 47130
Oct 13, 2005 Operating at 150 TPH, Carman Sand Cooler works with rotary dryers to reduce temperature and moisture. Vibrating fluid bed sand and gravel cooler, able to reduce product temperature from 225°F to 150°F, uses ambient air evaporative cooling and stores cool, dry product, without condensation, in plastic packaging. Construction includes wear liner in inlet chute, ¼ in. thick air distribution deck, and integral exhaust manifold. Reactive counterbalance minimizes vibration transmission.