Continental Fan Mfg. Inc.    Buffalo, NY 14215
Feb 28, 2012 Available in SWSI, Arrangement 10, Class I construction, FCU Utility Fans have forward curved impeller and are designed for low- to medium-pressure applications. Precision balanced air-moving devices, with welded steel construction, come in 11 sizes from 8-24 in. and capacities from 237-20,056 cfm. Along with TEFC industrial duty motor, features include adjustable V-belt drive, forward curved belt drive blowers, and self-aligning pillow block bearings.

POSIFA Microsystems Inc    San Jose, CA 95112
Feb 28, 2012 As drop-in, pin-compatible upgrade to Honeywell AWM3000 series, PMFc3000 series incorporates MEMS and microelectronics technologies and replaces membrane-cavity structure with solid-state thermal isolation process. This promotes reliability by eliminating field failures associated with pressure shock and contamination. While meeting same packaging and calibration specifications of AWM3000, PMFc3000 series offers initial output tolerance to less than 2% FS.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Feb 22, 2012 Available in various sizes and thread types, Screw-in GORE® Protective Vents maintain high level of constant airflow in electronic housings and sealed devices used in lighting, solar, and telecommunication infrastructure applications. Design equalizes internal pressure, preventing premature failure of housing seals, and single-body construction provides protection against mechanical stress in addition to preventing ingress of water, dust, dirt, and other contaminants.

Lincoln Associates    Marietta, GA 30064
Feb 22, 2012 Intended for odor control applications, Purafil BIOLOGICAL AIR TREATER (BAT) features fixed-film trickling filter technology and is designed to occupy minimal footprint. Stable biofilms, resistant to fluctuations, lend to operability, while mixed-media support prevents plugging and channeling. In addition to natural bio-trickling microbial process, features include engineered chemisorptive polishing media, optimized contaminant and odor removal capabilities, and minimized pressure drop.

Predictive Sensor Technology    Lynchburg, OH 45142
Feb 21, 2012 Based on iStatus(TM) software, which checks each data transmission against user-configured alarm thresholds, PST-THD Wireless Environmental Temperature, Humidity, and Dew Point Sensor/Transmitter alerts user via e-mail or text when targets are reached. Battery-powered system uses 900 MHz wireless protocol to ensure that other communications will not be affected. With open field range up to 1,200 ft, sensor/transmitter measure temperature from -40 to 255°F and RH from 0-100%.

LPR Global    Toronto, ON M5S2R4
Feb 20, 2012 Made of aluminum alloy, with lead content less than 0.01%, Tube Fittings and Valves are installed using threaded lok-type connection method, with no welding required. Units provide clear visual confirmation of installation, guaranteeing airtight sealing. Available in ¼-¾ in. sizes, fittings have anodized surface that optimizes hardness as well as corrosion and wear resistance. Ferrules and O-rings are specially designed to be used with R22 and R410A refrigerants and oils.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 17, 2012 Series TE-OND/TE-RND Outdoor Air Temperature Sensor accurately measures outdoor ambient temperatures on top of buildings or air handling units. Temperature sensor is guarded by white plastic shield and mounted on north side of building to protect against radiated heat. Where north facing side is not accessible, six-plate radiation shield version is available. Both models are mounted in IP65 enclosure and have removable terminal block.

Smart Fog    Reno, NV 89503
Feb 17, 2012 Smart Fog® ES100 uses non-chemical disinfection to eliminate risk of distributing bacteria, molds, and viruses in building and duct-mount applications. Reversing cohesion and maximizing adhesion, Smart Fog technology injects oxygen into every droplet dispensed. Dust and air borne spores are attracted to 4.2 micron droplets, ideal for 100% dust suppression, and oxidized. System does not require any cleaning, and recyclable filter elements need only be replaced every 2 years.

AirClean Systems, Inc.    Raleigh, NC 27604
Feb 16, 2012 Based on AirClean® Operating System, which provides constant control and monitoring, Independence(TM) combines true zero gas measurement with multiple gas detection methods, such as PID, metal oxide arrays, acid arrays, and colorimetric gas sampling tubes. AirSafe(TM) TOUCH automatic safety controller interfaces with AirClean® OS and provides 1-touch control of all critical functions and safety features. In addition, hood includes integrated chemical reference library and application validation system.

Thomas Products Division    Sheboygan, WI 53081
Feb 15, 2012 Designed for air seats, light-duty air suspension, and other mobile applications, Thomas 135 Series DC WOB-L® compressor is 4.34 x 1.66 x 3.6 in., 1.6 lb, intermittent-duty pump manufactured with plastic components. Series includes 12 and 24 V versions, which feature oil-less and non-lube piston and cylinder as well as stainless steel and silicone valves. Balanced design of both versions lends to smooth operation with minimal vibration.

Atlas Sales & Rentals, Inc.    Torrance, CA 90501
Feb 08, 2012 Measuring 34 in. wide, air-cooled PACSlim-12 provides 12 tons of cooling for offices, server rooms, event tents, and other indoor/outdoor locations. Radial blowers with built-in variable speed motors deliver uniform airflow across evaporator coil. Combined with acoustical insulation in evaporator section, blowers ensure minimal sound level. Housed in powder coated steel cabinet, spot cooler is available in 208-230 V or 460 V with operating range of 45-115°F.

Climatecraft    Oklahoma City, OK 73101
Feb 06, 2012 MatrixMonitor(TM) gauges airflow in arrays with 3-98 fans, with max airflow of 300,000 cfm per array. Offering alternative to fan inlet and piezometric flow monitors, this digital instrument consists of sensors and internal wiring for each fan connected to embedded processor. Solution operates on 100 W power supply and generates one airflow signal for entire fan array. With dual fan array capability, product can operate as stand-alone system or integrate with building automation system.

Emerson Climate Technologies, Inc.    Sidney, Oh 45365-0669
Feb 03, 2012 Serving stand-alone and parallel systems with large (7.5-15 hp) refrigeration requirements for low- to medium-temperature applications, Copeland Scroll® K5 refrigeration compressor incorporates 2 features that promote system efficiency. Variable volume ratio technology optimizes low-condensing performance, while vapor injection capability maximizes capacity at low set points without adding more/larger compressors. CoreSense(TM) technology allows on-site/remote diagnostics to help reduce downtime.

DENSO Corp.    Aichi 448-8661  Japan
Feb 02, 2012 Without compromising on strength or performance, 16 mm wide radiator is sized to afford flexibility for installation in engine compartment while also promoting vehicle safety in case of frontal collision. Tank is made with environmentally friendly plant-derived resin, and efficient heat radiation is achieved via fin design with optimized number of louvers on surface. Material of construction for fins and tubes also promotes to overall efficiency.

Despatch Industries    Lakeville, MN 55044
Feb 01, 2012 With integrated data logging capabilities, Protocol 3(TM) enables users to obtain historic process data for analysis and reporting. Microprocessor-based unit provides hi-limit control, built-in real-time clock, USB port for configuration set-up and export of data files, password protection of configuration parameters, and 5 output relays that signal user-specified events to external alarm devices. Users can choose Modbus or Ethernet communications for remote start and programming via PC.

Phoenix Contact    Harrisburg, PA 17111 0100
Jan 31, 2012 Made from PVC material with V0 inflammability rating as per UL 94, Wire Ducts range in size from 25-120 mm and come in 2 m lengths. Units are UL and CSA approved with flexible fingers that will not snap when user runs wire through them. Notched score line eliminates need for notching pliers to break off fingers, while cover's contour allows it to snap on and fit securely. Applications include biotech, natural gas, and food industries.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Jan 31, 2012 Available in lighted and non-lighted versions, AeroFan Superior Bathroom Fan provides whisper-quiet, 2-speed operation and offers various optional grille designs. ENERGY STAR® qualified fan employs long-life ball bearing motor and comes in steel housing with corrosion-resistant paint. Designed to fit 4 and 5 in. ducts, product has built-in counterbalanced damper, thermal overload protection, and adjustable mounting brackets.

Aramsco    Thorofare, NJ 08086
Jan 27, 2012 Intended for applications requiring temporary, high-performance dehumidification, rugged LGR 7000XLi optimizes water removal via integrated Advanced Crossflow Technology. Pre-cooling system boosts water removal efficiency and enables this 102 lb unit to continue to remove moisture in drier environments. Plus i-Series intelligent control panel and humidistat are also standard features; latter enables set-and-forget humidity level control.

Newport Electronics, Inc.    Santa Ana, CA 92704
Jan 23, 2012 Operating at 2.4 GHz, zSeries monitors and records temperature, relative humidity, and barometric pressure over Ethernet network or Internet via web browser. End Devices transmit up to 300 ft to Coordinator connected directly to network, and can trigger alarm if variables go above or below user-determined set point. Alarms can be sent by email to single user or to group distribution list, and by text messages to Internet-enabled cell phones and PDAs.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 19, 2012 Featuring plated steel case, painted steel cover, and plastic set point window, Series DFS protects coils in air handler systems by preventing frost build up. DPDT manual or automatic reset relays sense lowest temperature along any 1 ft section of capillary, signal building management system, and cut off fan. Utilizing visual set point indicator and set point screw, set points can be adjusted as low as 34°F. Mounting clips are included for installation.