HVAC

Test & Measuring Instruments, HVAC, Sensors, Monitors & Transducers

One-Color Sensors offer non-contact temperature measurement.

June 1, 2015

Designed for measurements on metals and bright/shiny materials, 16-bit Metis M3 Pyrometers are stand-alone, self-contained IR thermometers with on-board temperature display and direct analog and digital outputs for integration into PLC, DCS, and digital indicators. Models M309, M316, and M318 have spectral ranges of 0.7–1.1 µm, 1.45–8 µm, and 1.65–2.1 µm and temperature ranges spanning 550–3,300°C, 200–330°C, and 100–1,300°C, respectively. Response times are <1 ms, adjustable up to 10 sec. Read More

HVAC

External Mount Duct Fans suit space-restricted areas.

June 1, 2015

When space restrictions prevent use of inline duct fans, EXT External Mount Duct Fans offer through-the-wall solution, and can be sidewall mounted on exterior of building. Units feature external rotor motors, enclosed motor housing for dust and lint, automatic reset thermal overload protection, and built-in backdraft damper. Available in 4, 6, and 8 in. duct sizes, speed-controllable fans provide exhaust and ventilation in tight attic mountings, high rise buildings, and apartments/townhouses. Read More

Fluid & Gas Flow Equipment, HVAC, Green & Clean

Automotive Air Filters extend change intervals to 3 years.

May 29, 2015

Featuring advanced dual-stage filtration system that combines synthetic oil wetted pre-filter with pleated filter, microGreen® Extended Performance Air Filters are 99% efficient and extend change intervals up to 3 years or 45,000 miles. Filters capture and hold 3x more dirt than OEM models, keeping engines cleaner over extended use and time. Available as direct replacements for conventional filters, microGreen® filters come in axial, conical, panel, and radial designs. Read More

Controls & Controllers, HVAC, Green & Clean

Web/Smartphone Controls work with mini-split heat pumps.

May 27, 2015

Web and Smartphone (iPhone/Android) controls for mini-split heat pumps let users control temperature settings online as part of energy management dashboard. Up to 8 heating and cooling periods can be set up, and thermostat templates can be applied to multiple locations. Also, users can see costs and full impact when combined with room sensors, such as PowerWise air quality sensors, that can show temperature, humidity, CO2, and VOC levels. Read More

Fluid & Gas Flow Equipment, HVAC

Three-Stage Aerospace Filtration System delivers HEPA efficiency.

May 27, 2015

Designed for HEPA-required paint booth exhaust systems using chromate formulations, HEPA-XFP™ fits into standard 3-stage filtration frames without requiring HEPA framework. First stage uses CPA (multi-layered polyester) media, and second stage is ME/PT panel. Latter has air-entry layer of multi-layered, multi-density polyester and air-leaving media of ¼ in. thick, densified polyester. Constructed using 3 plies of electrostatic media, third stage consists of HEPA -XFP™ 6 Pocket Bag Filter. Read More

HVAC

Customizable Active Desiccant System achieves low dew points.

May 27, 2015

Comprised of 5 standard models with ratings up to 20,000 cfm, ASCENDANT™ Series cooling and active desiccant dehumidification hybrid system features regeneration input and serves applications requiring dew point temperatures as low as 20°F and air humidity levels as low as 15 grains. Operation, which does not require exhaust energy recovery, is possible as partial or dedicated outdoor air system (DOAS) or as true variable air volume (VAV) unit. Integrated DDC optimizes system operation. Read More

HVAC

Low NOX Mobile Boiler Room targets rental market.

May 26, 2015

Along with Power Flame low NOx burner set to fire natural gas or #2 oil, 1,000 HP mobile boiler room incorporates ASME spray deaerator and duplex feedwater pumps, ASME blowdown separator, chemical feed system, oil pump, and air compressor. ASME Section I firetube boiler is designed at 290 psig with operating pressure capabilities from 100–260 psig. Motor control center panel is also standard, and all equipment is fully piped and wired and mounted inside 53 ft container with 3-axle chassis. Read More

Mechanical Components & Assemblies, HVAC

Motorized Centrifugal Blower delivers airflow of 1,900 cfm.

May 26, 2015

Measuring 15.9 x 6.4 in., OAB400 Series offers max static pressure value of 5.4 in. H2O and meets UL Class B Insulation requirements. Unit features all-metal impeller, sealed dual ball bearing design, and diecast aluminum frame. Utilizing backward curved blades, motorized impeller is designed for electronic cabinets, air filtration, networking, and ventilation systems. OAB400 Series has current rating of 1.26 A, power rating of 387 W, and operating temperature of -40 to +80°C. Read More

HVAC

Dust Collectors extend filter life via cartridge cleaning system.

May 26, 2015

FORCE™ dust collectors feature Roto-Pulse® cartridge-cleaning system. This automatic, incrementally rotating filter cleaning system uniformly cleans 100% of cartridges' surfaces using pulsed air. Time between pulses and duration of each pulse are factory pre-set for optimal cleaning but can be adjusted for various applications or processes. Promoting life of filters and compressor, Roto-Pulse is engineered for reduced-noise operation and compressed air consumption. Read More

Sensors, Monitors & Transducers, HVAC

Laser Sensors feature fan-cooled design.

May 22, 2015

Featuring 65 mm aperture, Models FL1100A-BB-65, FL600A-BB-65, and FL600A-LP1-65 measure laser power from 600 mW to 1,100 W, 600 mW to 600 W, and 1–600 W, respectively. Compact devices operate without water cooling, eliminating necessity of fixed water lines and possibility of contaminated water or corroded sensors. All thermal sensors feature Smart Connector interface that operates with StarLite, Nova II, and Vega smart displays, and Juno PC interface. Read More

HVAC

Rotary Screw Compressor has variable speed, direct drive design.

May 22, 2015

Along with flow range of 36–152 cfm at 125 psig, SFC 22 features Sigma Control 2™ intelligent controller that offers compressor control and monitoring with communications capabilities for plant control/monitoring systems integration. Along with built-in heat recovery options to promote energy conservation, features include optimized cooling design, eco-friendly filter element, integral moisture separator with drain, and Electronic Thermal Management system. Integrated dryer is also available. Read More

HVAC

Commercial/Industrial Fans come in multiple construction options.

May 21, 2015

Constructed from galvanized steel with bolted frame, USF-200 has backward inclined centrifugal wheel and suits Class I airflow and pressure applications. Capacities range from 50–13,700 cfm and up to 5.0 in. wg. Used when coating on housing and in airstream is required, USF-300 offers capacities up to 54,000 cfm and 5.0 in. wg. With painted steel construction and backward inclined or airfoil wheel, USF-400 is capable of Class II applications with capacities up to 69,000 cfm and 8.5 in. wg. Read More

HVAC

Plenum Fans feature backward curved airfoil wheels.

May 19, 2015

Designed to slide into field erected or factory built air handling units or plenums, TEK Plenum Fans operate by pressurizing plenum in which they operate, and are suited for supply or return air applications. Impellers are constructed with injection molded GRP polyamide TEK wheel and offer non-overloading power characteristics. Equipped with TEFC industry duty motors, modular fans eliminate traditional scroll housings, transitions, and diffusers. Read More

HVAC, Material Handling & Storage

Portable Air Compressor produces 425 cfm at 145 psig.

May 18, 2015

Equipped with oversized fuel tank and power-saving Sigma Profile rotary screw airend, Mobilair™ M130 is suited for heavy air users in specialty applications such as sandblasting and demolition. Fully weatherproofed canopy and wide-opening gull wing doors allow quick access to all components for servicing and also reduce noise levels. For portability and optimal road handling, compressor has steel chassis, torsion bar suspension, oversized tires, and instrument/light package. Read More

Sensors, Monitors & Transducers, Thermal & Heating Equipment, HVAC

Thermal Module ensures motor protection.

May 18, 2015

Serving as accessory to ETEL's torque motors, IMTHP Thermal Module provides absolute motor protection from overheating. While monitoring readings from 3 KTY thermistors, unit uses built-in algorithm to detect any steady increase in KTY sensor output. IMTHP provides corrected analog temperature signal, allowing precise and continuous monitoring of actual temperature in motor. It also outputs digital warning/error signal that can be used without complex data processing. Read More

HVAC

Heating/Cooling Units are built for performance and reliability.

May 15, 2015

Sized to fit residential and light commercial building roof frames/slabs, packaged units of Coleman LX Series come with exact-match gas and electric hookups and offer 14 SEER rating that exceeds U.S. DoE standards. Single-cabinet design fosters access to components to aid installation/service. Available in cooling with gas heat configuration, 2- to 5-ton capacity units feature copper tube/aluminum fin condenser coils, slide-out evaporator coil, and tubular stainless steel gas heat exchanger. Read More

HVAC

High Volume Low Speed Fan features gearless design.

May 14, 2015

For maximum efficiency, MacroAir's AirVolution-D features gearless motor coil made up of copper ring with ultra-low resistance. Model 370, available with blades from 6–12 ft, integrates into most small spaces. With blades from 8–18 ft, Model 550 is effective at controlling temperature and humidity in medium-large spaces. Designed for heavy-duty applications, Model 780 has 20–24 ft blades, making it suitable for extra-large spaces. Finally, AirVolution-D3 offers entry-level solution. Read More

HVAC

Energy/Heat Recovery Ventilators help reduce operating expenses.

May 8, 2015

Featuring useability-optimized controls, residential Nu-Air energy recovery ventilators (ERVs) and heat recovery ventilators (HRVs) meet ENERGY STAR® performance requirements. Light commercial models are designed for facilitated installation and offer flexibility to fit custom applications. Read More

HVAC

Dust Collector features true ledge-less design.

May 7, 2015

Suitable for controlling dust and fumes in variety of plant applications, FORCE™ Dust Collector offers heavy-gauge galvaneal steel construction and utilizes Roto-Pulse® filter cleaning system, which extends filter life. True ledge-less design eliminates dust build-up inside cabinet for consistent OSHA/NFPA compliance. Rated at equivalent of 20-year life expectancy, heavy-duty valve system does not require heaters in cold climates down to -40°.  Read More

HVAC

Repairable Condensing Boiler is built for longevity.

May 5, 2015

Arctic combines the very best attributes of both watertube and firetube designs.  Focused on reducing resistance to flow, the new L.I.F.T. ™ Transformative Tube Technology was designed, not bent.  Improved tube geometry increased water velocities, natural circulation, and heat transfer boosting efficiency while minimizing pump requirements. Where longevity and efficiency meet! Read More