Emerson Process Management    Pleasanton, CA 94566
May 06, 2011 Designed to measure pressure and temperature behind casing in subsea production wells online and in real-time, Roxar Downhole Wireless PT Sensor System - Annulus B consists of Integrated Downhole Network system, Downhole Network Controller Card, wireless reader, wireless PT Transponder and antennae, and transponder and reader carrier. System is qualified to last minimum of 20 years at temperatures up to 302°F and pressures up to 10,000 psi, with accuracy of ±2.5 psi and ±0.18°F.

Hunter Fan Co.    Memphis, TN 38114
May 05, 2011 Offering alternative to UV or UV-C air purifiers, Total Air Sanitizer adds electric current to HEPA air filter that kills bacteria, viruses, molds, and fungi while capturing and removing dust, pollen, pet dander, and other allergens from air during any season. System captures more than 99.9% of airborne particles, and, in some rooms, may provide noticeable improvement in air quality in as little as 1 hour of use.

Parker Hannifin Corp.    Oxford, MI 48371
May 05, 2011 To keep refrigerated air dryers operating at full capacity, Finite series removes up to 99.995% of oil, water, and solids from compressed air and other gases. This protects complex internal components of dryer by removing compressor oil carryover. Element threads into top of housing, facilitating replacement even in space-constrained environments. Design also eliminates need to disconnect drain connections before removing bowl to access spent element.

Aramsco    Thorofare, NJ 08086
May 05, 2011 Syclone centrifugal air mover has stackable design and dual-GFCI-receptacle outlet, allowing user to daisy-chain up to 4 units in single room. Providing air flow of 2,900 ft/min, device enables effective drying for restoration contractors, and has multiple drying angles and 3 speed settings. Low-power machine also includes carpet clamp as well as front-mounted control panel.

Process Sensors Corp    Milford, MA 01757
May 04, 2011 Pyrometer Series Metis MB35 utilizes lead selenide detector with filtered spectral response of 2-5 µm. Unit has 3 msec response time, and control features and functions, along with pyrometer settings, are configured via PC using PSCWin Software. Features include adjustable focus; RS232, RS485, or Profibus digital communication interfaces; and analog 4-20 mA output. Applications include CO₂ laser heating, composites, and metal surfaces above 35°C.

Enerconcept Technologies Inc    Magog   Canada
May 02, 2011 Featuring wall-mounted design that simulates glass-like facade, Lubi(TM) produces max output of 254 BTU/h/ft² and temperature increases of up 81°F above ambient outdoor temperatures, making it suitable for pre-heating outdoor air and supplemental heating of facilities. Each 3 x 1 ft polycarbonate panel has 906 perforations, which are dimpled and contoured to prevent rainwater infiltration. Ability to draw air through perforations makes Lubi insensitive to wind speeds of 7 mph or less.

Spirax Sarco, Inc.    Blythewood, SC 29016
Apr 29, 2011 Suitable for vertical open-ended steam vent pipes, VHT Vent Heads safely discharge dry steam to atmosphere at low velocity, protecting personnel from injury and buildings from damage. Internal drain recovers condensate that would otherwise be directed to external drain and removes possibility of hot condensate exceeding temperature limitations of local drainage. Manufactured from austenitic stainless steel, vent heads are suited for blowdown vessels, feed tanks, and condensate receivers.

Thomas Products Division    Sheboygan, WI 53081
Apr 28, 2011 At 8.32 x 6.75 x 4.08 in. and 6.8 lb, 2450Z Series employs variable-output, brushless, 140 V DC motor that conserves power and energy by matching compressor output to application requirements. Unit produces 50 dB(A) @ 20 psi and features balanced stroke design and center-line of gravity mounting for minimal vibration. Oil-less, RoHS-compliant compressor, with permanently lubricated bearings and WOB-L® piston technology, is rated for 3.3 cfm max flow @ 2,200 rpm and 35 psig max pressure.

Donaldson Australasia Pty Ltd    Wyong   Australia
Apr 26, 2011 Available in standard and anti-static versions, PowerCore CP Series can replace traditional baghouse technology for dust collection in industrial, grain handling, cement, plastic, and wood industries. UltraWeb nanofiber surface loading technology with corrugated, fluted media optimizes particulate collection efficiency. Featuring built-in handles, filter packs facilitate change-outs, which are accomplished in minutes without tools.

Calex Electronics Limited    Bedfordshire   United Kingdom
Apr 25, 2011 Able to detect IR radiation at wavelengths from 2.0-2.4 microns, PyroUSB 2.2 utilize short-wavelength measurement method. Model PU151LT2.2 is designed for measuring targets from 45 to 300°C, and other models cover 250 to 1,000°C and 450 to 2,000°C ranges. Supporting direct connection to PC via included USB cable, non-contact sensors provide selectable 0-20 mA or 4-20 mA output linear with temperature. Other features include CalexSoft software, alarms, and OPC Server interface.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Apr 25, 2011 Offering capacities from 300-1,700 cfm, AMR Motorized Ring Fans utilize speed controllable, single-phase PSC motor. Both motor and impeller are located directly in air stream, where impeller acts as rotating heat sink with optimal heat dissipation and motor cooling. Near zero speeds can be achieved using solid-state speed controls. Rated at 70°C ambient operation, fans offer standard or reverse flow configurations and come in open blade or panel designs.

Atlas Sales & Rentals    Torrance, CA 90501
Apr 25, 2011 Able to remove 170 pints at AHAM while drawing 10.5 A, Model DA 3500i is suitable for drying applications in water damage restoration and construction environments. Electronic control panel uses built-in sensors to show humdistat settings as well as inlet and outlet temperature and relative humidity conditions. Digital controls also enable humidistat set-up for ongoing moisture control. Constructed with roto-molded polyethylene housing, unit uses environmentally friendly R-410A refrigerant.

FREE2MOVE AB    HALMSTAD S-302 48  Sweden
Apr 25, 2011 Ison(TM) sensors, part of FS800 family of sensors, store up to 10,000 log-points with simultaneous humidity and temperature measurements. Log-intervals and alert threshold values are configurable, while units are self-calibrating and maintenance-free. Logged sensor data can be uploaded to USB-, Wi-Fi-, or LAN-compliant reading devices at range of up to 300 ft in free air. Products can used to monitor building structures, machinery, and sensitive goods.

EXAIR Corporation    Cincinnati, OH 45249-1621
Apr 15, 2011 ETC(TM) Cabinet Cooler® System maintains temperature in electrical enclosure at constant level, slightly under max rating of electronics, to keep them cool while conserving compressed air. Equipped with digital LED readout that displays enclosure temperature, control activates circulation of 20°F air to prevent electronics malfunction when user temperature setting is exceeded. Automatic drain filter separator keeps moisture in compressed air out of electrical enclosure.

Imperial Systems, Inc.    Jackson Center, PA 16133
Apr 15, 2011 Manufactured for all makes and models of cartridge dust collectors, DeltaMAXX(TM) Upgrade Replacement Dust Collector Filters employ NanoFiber Technology and deliver MERV 15 filtration efficiency. Pleated media offers 99%+ efficiency on .3-.5 micron particulate, regardless of nature of dust collection and air pollution control application. Also available for baghouses, these surface loading filters help reduce dust collector operational costs, mass emissions, and pulse cleaning.

Kooltronic Inc.    Pennington, NJ 08534
Apr 13, 2011 Used to cool electrical/electronic enclosure interiors, 480 V Panel Mounted Air Conditioners come in NEMA 4 or 4X versions with capacities from 5,000-26,000 BTU/H for indoor and outdoor applications. Models feature epoxy-coated condenser coils and painted galvanized sheet metal and may be used in washdown and outdoor environments. While GuardianX Series adds stainless steel shell, all models are UL-/CUL-Listed and use either CFC-free R134a or zero ODP R410a refrigerant.

Delta T Systems    Riviera Beach, FL 33404
Apr 12, 2011 Intended for boat builders and OEMs, Head Vent System uses single blower to extract air from multiple heads on vessel. Blower, control unit, and dampers are housed within central, remotely-located plenum box that measures 16 x 12 x 13 in. Able to ventilate up to 4 heads, fully automatic unit does not require any input from user. Each head is fitted with motion detector, and manual version is also available. System runs on 24 Vdc and requires one exhaust port to vessel exterior.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Relocatable roof-mounted fan system heats air that passes through it into workplace from outdoors. Providing air temperature management in many industrial processes, product is suited for use in fiberglass curing, concrete curing, opto- and piezo-electronics assembly and testing, adhesives, as well as urethanes and polyurethanes applications. It is also beneficial for curing rate control of resins and finishes, such as in furniture production.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Featuring galvanized construction, Tunnel Vent Fans are placed into one end of shed and pull hot air through louver into outside atmosphere. Units include self-tensioning device, which eliminates need to physically tension bolts every 2 or 3 months. Instead of centrifugal clutch system, which is prone to jamming, fans use no-fail weigh-control operation, which provides spring-loaded opening from spinning impeller.

Dometic Environmental Corporation    Richmond, VA 23227
Apr 07, 2011 Self-contained air conditioning unit offers 15,000 BTU/hr and provides engine-off cooling and heating for trucks, buses, ambulances, and other specialty vehicles. Running on 120 Vac electricity from shorepower connection or diesel generator, it features 2.5 kW heating capacity as well as cooling, and can be installed in vehicle undercarriage bay or storage locker. Compressor, condenser, and evaporator are mounted on compact chassis with shock and vibration isolation and aluminum sound shield.