Aeroflex Laboratories
Plainview, NY 11803
Jul 01, 2008 With frequency range of 1 MHz to 3 GHz, Model 3020C PXI has wideband width modulation up to 90 MHz for broadband communications standards or multi-carrier test applications as well as RF output power from -120 to +6 dBm. It incorporates dual-channel arbitrary waveform generator for supplying complex modulated signals, and is supplied with 0.5 GB of memory supporting up to 128 M x 16 bit I and Q samples. The 3020C can perform high-speed switching in less than 250 µs when in list mode.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Jun 27, 2008 With DSP-based software-defined radio architecture, Model 2820 RF Vector Signal Analyzer and Model 2920 RF Vector Signal Generator allow users to test WiMAX in any frequency band between 400 MHz and 4 GHz. They support 802.16e mobile WiMAX Wave 2 testing with up to 4 x 4 MIMO channels. SignalMeister(TM) v2.0 PC-based object-orientated waveform creation tool allows engineers to create highly complex signals required for RF testing and is optimized for MIMO signals.

Berkeley Nucleonics Corp.
San Rafael, CA 94901
Jun 27, 2008 With 2-trigger option, Model 575 allows user to sync, delay, gate, and trigger other devices. Channels have burst, duty cycle, single shot, and multiplexed output capabilities. Offering separate gate and separate external trigger input as standard, generator enables user to disable outputs of entire unit or individual channels when external triggering.

Silicon Laboratories
Austin, TX 78727
Jun 26, 2008 Capable of generating any output frequency from crystal/reference clock input with 0.3 picosec jitter generation, Model Si5319 Any-Rate Precision Clock is suited for high performance timing applications. It accepts any frequency from 2 kHz to 710 MHz and generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz. Supporting free-run mode of operation, IC is available in 6 x 6 mm, 36-lead QFN package and 3 speed grades based on maximum output clock frequency.

AnaPico AG
Zürich   Switzerland
Jun 10, 2008 With 0.001 Hz resolution, APSIN3000 CW signal generator has frequency range of 9 kHz up to 3.3 GHz. It offers RF power that is settable from -50 to +13 dBm, and phase noise as low as -125 dBc/Hz at 1 GHz and 20 kHz offset. Able to perform simultaneous frequency and power switching in less than 2 ms, 2.5 kg unit allows remote access via its LAN interface. Generator operates with stable temperature compensated 100 MHz reference (OCXO) and can be phase-locked to external reference.

Maxim Integrated Products
Sunnyvale, CA 94086
May 15, 2008 Utilizing low-noise VCO and PLL architecture, Model MAX3674 generates 5 ps RMS jitter output up to 1,360 MHz from low-frequency reference clock provided by on-board crystal oscillator or external LVCMOS clock. Unit provides 2 differential LVPECL outputs for same or different frequencies. I²C-compatible interface enables fine-tuning of output frequency for frequency-margining testing. Housed in 48-pin LQFP package, device operates from 3.3 V ±5% supply and is specified over -40 to +85°C range.

Integral Systems, Inc.
Lanham, MD 20706
Apr 29, 2008 Featuring modular architecture and software-defined nature, Telemetrix® 400TSS telemetry simulator and signal generator supports commercial and Government telemetry signal waveforms. Output frequency ranges include L- and S-Band RF, 70 MHz IF, and baseband telemetry and/or command data. While frequency sweeping enables receiver testing against simulated dynamics, variable output amplitudes enable testing of acquisition and lock thresholds, AGC performance, and fading performance.

Aeroflex Laboratories
Plainview, NY 11803
Apr 21, 2008 Avionics Test Bench and Avionics Test Studio address test compatibility for avionics navigation/communications. Utilizing Aeroflex 3000 Series PXI modules, Avionics Test Studio can generate avionics signal from 100 kHz up to 6 GHz, and can be used as bench-top instrument or within ATE environment. Available in 2 configurations, Avionics Test Bench offers ATB-3000 that includes touch-screen PXI chassis with built-in controller and 3025C RF signal generator and synthesizer module.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Apr 14, 2008 Available in 5 x 5 mm 32-pin LLP® package, Model LMH1982 clock generator with genlock delivers HD clock output jitter of 40 ps peak-to-peak, and offers reference clocks for video ADCs, DACs, and FPGA transceivers. It provides 2 LVDS output clocks with selectable frequencies for SD (27 or 67.5 MHz) and HD (74.25, 74.25/1.001, 148.5, or 148.5/1.001 MHz) resolutions. Unit operates from 3.3 and 2.5 V supplies and supports NTSC/525i, PAL/625i, 525p, 625p, 720p, 1080i, and 1080p video timing.

Saelig Co., Inc.
Pittsford, NY 14534
Apr 09, 2008 Housed in 55 x 80 x 16 mm anodized aluminum case, Wave Generator Xpress(TM) generates arbitrary digital signals of up to 16 bits and 100 MB depth per run, at up to 50 MS/sec (11 MB/sec sustained). Controlled by GUI-based 8PI Control Panel Software, 50 MHz device features multiple graphical and programming (TCL/tk and C/C++) interfaces. Additional 6 digital control lines can be used to handle I/O clock signals and generate repetitive sequences.

NuWaves Engineering
West Chester, OH 45069
Mar 28, 2008 Operating at 6 Vdc, Model RF2-3000UCV1 multi-octave upconverter features IF input ranging from 2-70 MHz to provide RF upconversion between 2 MHz and 3 GHz with gain flatness under 2 dB for specified spectrum. It has 50 dB of attenuation control with incremental steps of 0.5 dB and 5 kHz frequency step size. Packaged in ruggedized aluminum enclosure measuring 1.0 x 2.5 x 3.5 in., unit can be used in variety of applications, and also on bench as stand alone RF signal generator.

Saelig Co., Inc.
Pittsford, NY 14534
Mar 17, 2008 Designed for modulated-signal test procedures, TGR RF Generators offer high frequency accuracy, wide dynamic range, low phase noise/leakage, and flexible modulation capabilities. Model TGR2050 covers 150 kHz to 2 GHz in 10 Hz steps, and incorporates AM, FM, and phase modulation capabilities, while Model TGR1040 covers 10 MHz to 1 GHz in 1 kHz steps, and incorporates FM modulation only. Both can be operated using numeric/rotary controls, and can also be remotely controlled.

Agilent Technologies, Inc
Santa Clara, CA 95051
Feb 12, 2008 With switching speed of less than or equal to 900 µsec, Model N5183A MXG microwave analog signal generator is suited for EW, radar, military communications, and broadband wireless access applications. It provides frequency coverage to 20, 32, or 40 GHz. With +18 dBm to 20 GHz output power, continuous wave unit can overcome losses and drive high-power devices. It features level accuracy of ±0.6 to 0.8 dB with optional step attenuator, and includes analog and pulse modulation.

Berkeley Nucleonics Corp.
San Rafael, CA 94901
Jan 14, 2008 Combining properties of pulse generator with digital delay generator, multi-channel Model 575 offers clock-divider functions, allowing user to operate 1 channel at 20 MHz, another at 5 MHz, and another at 50 Hz. Each channel can use internal clock, multiple of internal clock, or 1 of 2 external trigger input connectors. Benchtop generator provides 250 ps resolution and up to 1 ppm accuracy for delay and widths. Rate, selected by period, is set to resolution of 10 ns.

Agilent Technologies, Inc
Santa Clara, CA 95051
Jan 10, 2008 Enabling engineers to accelerate PC display development, DisplayPort test solution provides flexible design, characterization, and debug testing, as well as source and sink compliance testing. It is comprised of DSO80804B Infiniium oscilloscope and E4887A TMDS signal generator. Together, components deliver source and sink design and characterization test capability, provide investment protection of TDMS signal generator for HDMI/DisplayPort testing, and facilitate compliance testing.

ON Semiconductor, LLC
Phoenix, AZ 85008
Dec 19, 2007 Employing 0.25 micron CMOS technology, 3.3 V PureEdge(TM) PLL-based Models NB3N3002 and NB3N5573 create selectable Host Clock Signal Levels and sub-picosecond jitter quality clocks at 25, 100, 125, and 200 MHz. Model NB3N3002 generates 1 differential HCSL output clock, while Model NB3N5573 delivers dual output. Housed in 5.0 x 4.4 mm TSSOP-16 package, devices provide phase noise of -130 dBc/Hz at 100 KHz offset from carrier frequency, and are suited for PCIe, GigE, and FBDIMM application.

Video Products Inc.
Aurora, OH 44202
Dec 03, 2007 Generating video patterns, MONTEST-HDMI enables evaluation and testing of HDMI or single-link DVI displays and components. It also supports 3 types of audio test signals including built-in sine wave tone generator, left and right channel stereo inputs, and optical S/PDIF digital audio input. With front panel controls or included infrared remote, users can select timings, patterns, color spaces, DVI/HDMI output, and audio signal type.

Advantest America Corp.
Santa Clara, CA 95054
Nov 01, 2007 Designed for OPENSTAR® T2000 test platform, 12 GHz Wideband Signal Generator/Analyzer features 32 RF signal I/O ports per module. It offers 16-device simultaneous testing of RF devices consisting of 4-8 ports, and supports 4-device parallel testing or 16-port multi-band RF devices. By using module in combination with existing 800 Mbps digital, 500 mA DPS, and base-band waveform digitizer generator modules, all RF SoC device signal tests can be conducted on single test system.

Saelig Co., Inc.
Pittsford, NY 14534
Oct 31, 2007 Housed in USB-powered box, PC-based PoScope combines 2-channel, 100 Hz to 200 kHz oscilloscope; 2-channel spectrum analyzer; 2-channel chart recorder that displays signals from 0.01 Hz to 200 kHz; 8- or 16-channel logic analyzer with 1 kHz to 8 MHz recording; 5-channel square wave and PWM generator; and 8-channel, 1 kHz to 1 MHz pattern generator. With USB interface, users can record, output, and print all waveforms or update firmware as new features become available.

Perpetuum Ltd.
Southampton   United Kingdom
Oct 05, 2007 Intrinsically safe PMG17 transforms kinetic energy of machine vibration into electrical current sufficient to power complete wireless sensor nodes, including sensors, micro processors, and 802.15.4 transceivers. Designed for safe working in Zone 0, 1 or 2 environments, microgenerator carries ATEX EC-Type Examination Certificate and IECEx Draft Certificate of Conformity for use in hazardous oil, gas, chemical, and petrochemical environments where flammable gases may be present.