Quantum Fuel Systems Technologies Inc
Irvine, CA 92614
Dec 14, 2012 Pre-assembled, quality tested, and fully validated natural gas storage modules and system assemblies leverage Q-Lite™ carbon-composite gaseous fuel storage technology and are designed for accelerated integration onto variety of vehicle platforms. Products foster intelligent lightweight systems that maximize on-board fuel storage and contribute to improved fuel economy, handling, and emissions. Advanced natural gas storage systems also lend to weight reduction and increased fuel storage.

Camfil Farr Air Pollution Control
Jonesboro, AR 72401
Dec 12, 2012 Featuring modular construction, Gold Series® has reinforced door with double-thick hinges, and single flat inside panel to create smooth, air-tight gasketed seal. Fans are equipped with damper actuator handle that allows user to see from ground level whether damper is open or closed. Inside collector, gaskets have been moved to edges of pan so that no dust builds up on vertically mounted filters. Additional features include touchscreen controls, spark diverter inlet, and diaphragm silencer.

Westport Manufacturing Ltd
Vancouver, BC V5P5Z3
Dec 05, 2012 With universal system design that fosters OEM integration, Westport™ LNG Tank System provides on-board storage solution for vehicles using liquefied natural gas (LNG). Single-tank, 120 or 150 gal capacity single-tank systems can run for 350 or 450 miles, respectively, on cold (unsaturated) LNG fuel and are capable of carrying both cold and warm LNG. Driver display indicates LNG fuel levels as well as status and diagnostic information about tank and integrated pumps.

Thermadyne Industries, Inc.
St. Louis, MO 63017
Mar 01, 2012 Tweco® WeldSkill® helmet can be used in both weld and grind mode and will darken when TIG welding even at 5 A. Solar powered helmet has viewing area of 3.86 x 1.69 in. and weighs 16 oz. When switching from dark-to-light, users can select from three switching speeds: short (0.25-0.35 sec), medium (0.35-0.50 sec) and long (0.50-0.80 sec). Sensitivity and delay knobs are on outside of helmet shell, allowing operators to make adjustments while welding.

Quantum Fuel Systems Technologies Inc
Irvine, CA 92614
Feb 17, 2012 Composite compressed natural gas (CNG) tanks of 400 Series have Diesel Gallon Equivalency (DGE) of 26 gal and are constructed such that their overall weight minimizes requirements for mounting support. Consequently, construction also increases available payload as well as on-board storage capacity. These tanks target commercial natural gas fleets, including refuse truck applications.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Sep 12, 2011 Augmented with user-replaceable lithium battery, solar-powered VIKING(TM) 3350 Series features 5.25 x 4.50 in. cartridge shell and is suited for stick, TIG, pulsed TIG, MIG, pulsed MIG, and flux-cored welding, as well as gouging and grinding. Internal switch allows user to toggle shade control between 6-9 or 10-13 for handling plasma cutting up through heavy plate welding. Weighing 21 oz, helmets meet ANSI Z87.1, CAN/CSA Z94.3, and CE Certifications.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 30, 2011 Offering alternative to push-pull system, Circulator(TM) helps maintain clean work environment by reducing dust and dirt in operator and surrounding work areas. It is intended to supplement existing source extraction system or natural and/or forced ventilation systems. Green-Drive(TM) control system features pressure sensor that continually monitors system operation and adjusts airflow to maintain required performance levels, which saves energy when compared with on/off systems.

Thermadyne Industries, Inc.
St. Louis, MO 63017
Aug 26, 2011 Supplied in environmentally friendly packaging, Journeyman® Select EDGE Outfits come with CA 2460 Cutting Attachment, 315 FC Torch Handle with built-in flashback arrestors and reverse flow check valves, as well as ESS4 EDGE Series regulators. Cutting attachments are available with 75° or 90° head angle, and heavy-duty outfit can cut up to 8 in. and weld up to 3 in. Ruggedized regulator features internal vent system and Shock Limitation and Absorption Mechanism (SLAM) technology.

Walter Surface Technologies
Windsor, CT 06095
Aug 25, 2010 Comprised of automatic refilling station, reusable aluminum bottle, and 10 L bag-in-box of AF-Weld anti-spatter product, Air Force/AF-Weld minimizes environmental impact by using compressed air as propellant and eliminating need to dispose of empty aerosol cans. Anti-spatter formula inhibits corrosion, allows for immediate painting, and helps prevent weld porosity. Emulsion retracts in presence of heat, leaving immediate welding area clean and void of liquid.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jan 20, 2010 Trailblazer® 302 EFI welder generators weld 280 A at 100% duty cycle (300 A for wire welding) and Bobcat 250 units weld 250 A at 100% duty cycle (275 A for wire welding). Providing 10,500 W continuous power, both Electronic Fuel Injected engine-driven, twin-cylinder models support stick, MIG, flux cored, AC/DC TIG, and gouging systems. Outputs are rated for operation at 104°F and machines include protective armor for high-impact and chemical resistance.

Kimball-Midwest
Columbus, OH 43228
Jul 28, 2008 Protecting materials by reducing heat transfer during soldering, brazing, welding, and open flame contact, Therma-Shield Heat Protection Paste eliminates disassembly of valves and other components. It can be applied to almost any surface or material, and conforms to irregular shapes and surfaces to provide total coverage and protection. Product is non-flammable, non-toxic, non-corrosive, and biodegradable, and helps eliminate waste as it can be applied only where needed.

Hobart Brothers Co.
Troy, OH 45373-2900
Jan 17, 2008 Measuring 35 in. tall with 23 in. dia, 900 lb X-Pak is made from 100% recyclable fiber and includes 23 in. chimeless cone. Wire offered with drum includes Tri-Mark® Metalloy® Vantage(TM) and Metalloy 76; Hobart® Fabcor® 86R; and Corex® Metal-Cor Maxim(TM) and Metal-Cor 6 in .045 and .052 in. dia. Optional overhead lifting device works on CAM action that stabilizes drum during transport and attaches to overhead hoist or fork on lift truck.

Great Lakes Air Systems
Clawson, MI 48017
Jun 22, 2005 Featuring curtained design, RoboVent BinVac captures smoke, debris, and contaminants in air from parts that are still smoking after being welded, and returns clean air to plant. Unit removes airborne contaminants before they can settle on plant floors, walls, and machinery. Self-contained hood can be moved around plant without need to re-configure ductwork. Filter system requires minimal maintenance and filter changes.