Siemens Energy & Automation, Inc.
Alpharetta, GA 30005
Jan 24, 2012 With electrical energy input and direct reduced iron supplied during tapping, Simetal EAF FAST DRI supports continuous melting process. Continuous supply of electrical energy during flat-bath operation avoids line harmonic distortions such as flicker, while Furnace Advanced Slag-free Tapping system enables charging, tapping, and taphole refilling under power-on conditions. Designed in combination with Siemens' Hot Transport System, furnace can be fed with hot DRI at temperatures of 600°C.

Allpax Products, Inc.
Covington, LA 70433
Jan 18, 2012 Allpax waste-steam recovery system reduces energy expenditure and water consumption to address overall facility sustainability. In new installations or as retrofit, system captures come-up vent-open waste steam in vented tank where steam condensates into hot (200°F) water that can be used to supplement hot water demands or run through heat exchangers for other plant processes. Vented collection tank is pressure neutral, and heat recovery system with pressure sensors is PLC controlled.

Carrier Corp.
Syracuse, NY 13221
Oct 14, 2011 Endowed with Greenspeed(TM) intelligence, Infinity® combines modulating and variable-speed technologies with communicating control system to constantly adapt to residence conditions. Annual Fuel Utilization Efficiency (AFUE) rating is up to 98%, and quiet operation is made possible by technology that distributes heated air at lowest possible setting for majority of heating season. In low-fire mode, sound ratings are as low as 38.4 dB.

PVA Tepla America, Inc.
Corona, CA 92879
Jun 22, 2011 Used to produce wafers for photovoltaic (PV) industry, MultiCrystallizer VGF732Si HC (generation G5) vacuum furnace features independently controllable heating and cooling zones. It performs directional solidification of multicrystalline silicon ingots based on vertical gradient freeze process. System uses crucibles from 480-520 mm high to handle silicon loads up to 560 kg, and temperature control system with heating zone ensures columnar solidification even on ingot exterior.

Enerconcept Technologies Inc
Magog   Canada
May 02, 2011 Featuring wall-mounted design that simulates glass-like facade, Lubi(TM) produces max output of 254 BTU/h/ft² and temperature increases of up 81°F above ambient outdoor temperatures, making it suitable for pre-heating outdoor air and supplemental heating of facilities. Each 3 x 1 ft polycarbonate panel has 906 perforations, which are dimpled and contoured to prevent rainwater infiltration. Ability to draw air through perforations makes Lubi insensitive to wind speeds of 7 mph or less.

ZeroPoint Clean Tech, Inc.
Potsdam, NY 13676
Mar 24, 2011 Optimally sized for 1-15 MW projects, ZeroPoint Renewable CHP Solution produces synthesis gas that is suitable for blending with landfill gas to operate existing engines and transmission grid connections. Additionally, biomass gasification solution produces sequestered carbon in form of biochar as co-product, which offers positive environmental and agricultural uses to sequester carbon, including at landfills.

Solar Air Systems
Avon, MA 02072
Feb 11, 2011 Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.

Heat Trace Products, LLC
Leominster, MA 01453
Nov 03, 2010 Available in standard lengths from 5-200 ft, T-Links Pre-Terminated Heat Trace System facilitates installation of self-regulating heaters. System features T connections that are fail-proof and water-tight, and is available in 3, 5, 8, and 10 W/ft in both 120 and 240 V. Able to be installed under insulation, T-Links can be combined with conventional heat trace and can step up or step down wattage when required. Full line of approved accessories is available.

Solar Manufacturing
Souderton, PA 18964
Jul 21, 2010 Featuring 7.5 in. dia x 14 in. high Hot Zone and max operating temperature is 3,000°F, Model VTL-714 is suited for homogenizing and heat treating refractory alloys, performing diffusion couple experiments, and other proprietary heat treat work. Furnace employs graphite heating elements; 35 cfm, 2-stage vacuum pumping system; graphite felt and FlexShield hot face insulation; and partial gas system of argon and nitrogen.

BorgWarner
Auburn Hills, MI 48326
Feb 19, 2010 Installed in air conditioning system and connected to vehicle's 400 V electrical system, cabin heaters achieve 3,000 W output to effectively defrost windshields and provide warm, comfortable driving environment for drivers and passengers. Each is designed with high-voltage connection as well as ceramic components and can be modified for all-electric and hybrid vehicles with various electrical system voltages.

Cemline
Cheswick, PA 15024
Dec 11, 2009 Designed for operating using either energy from external solar collector or as dual-energy source unit, Solar Water Heaters use solar controller and double walled brazed plate heat exchanger to maximize heat transfer. Additional heating source, using boiler water, steam, or electricity, can be use in situations where solar energy is lacking or unavailable. They are available in variety of storage tank volumes from 120-680 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

Mitsubishi Electric & Electronics USA, Inc. - HVAC Advanced Products Div.
Suwanee, GA 30024
Oct 27, 2009 Available in indoor and outdoor versions, STAR LINEUP P-Series A30/A36 models feature H2i® hyper-heating capabilities that provide heating down to -13°F. Units also offer moisture removal and optimized HSPF. Ducted PEAD-A indoor model features adjustable return from rear to bottom, quiet operation as low as 30 dB(A), multiple fan speeds, and built-in drain pump.

Heliodyne, Inc.
Richmond, CA 94804
Jul 22, 2009 Commercial Solar Station, intended for commercial solar hot water projects, is packaged closed-loop heat transfer appliance that accommodates projects of up to 100 flat plate collectors with single module. Larger projects can combine modules in parallel for limitless sizing potential. Featuring plug and play installation, system includes touchscreen interface, controller for remote Wi-Fi based monitoring and data storage, single/double wall heat exchanger, and integrated VS pumps.

Exothermics, Inc.
Toledo, OH 43612
Oct 07, 2008 Featuring sinusoidal design and 409 grade stainless steel construction, MT exchanger captures exhaust from manufacturers' baking, drying, heating, or other processes and turns it into energy that can be used to run manufacturing equipment or heat buildings. This air-to-air, plate-type heat exchanger is available for exhaust processes with temperatures from 70-800°F.

BTU International, Inc.
North Billerica, MA 01862
Sep 29, 2008 Including second-generation spray coater that features topside and bottom-side phosphorus coating, along with quartz lined diffusion furnace, Meridian(TM) in-Line diffusion equipment is suited for alternative energy and electronics manufacturing markets. Spray coater has integrated design and uses corrosion resistant materials that minimize risk of process contamination.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Oct 25, 2007 Compatible with all commonly used refrigerants, Enviro-Pak enables restaurant owners to get free hot water by capturing otherwise wasted heat piped away from refrigeration or central air conditioning systems in 1.5-5 ton range. Heat recovery system uses excess refrigerant energy to reduce water heating equipment load and provide free domestic hot water for cooking and cleaning. Quietly operating system comes with white powder coat or stainless steel jacket.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Dec 12, 2006 Engineered to minimize water heating equipment load, Enviro-Pak hot water maker and heat recovery unit uses excess refrigeration energy of existing or newly installed air-conditioning or refrigeration systems in 1.5-5 ton range. Unit can be used with R-22 or R410a applications, and can provide increase in SEER for older systems up to 3 SEER points. Offered with white powder coat paint or stainless steel jacket, system includes indicator lights for operational and safety diagnostics.

Delphi
Troy, MI 48098-2815
Dec 05, 2006 Requiring no compressor or chemical refrigerants, HMX Heat and Mass Exchanger enables water-fueled air conditioners to cool homes, office buildings, and industrial spaces without generating greenhouse gas emissions. System capitalizes on thermodynamic M-Cycle, which harnesses endless supply of atmospheric energy to drive cooling. Cooling capacity and Energy Efficiency Ratio increase along with temperature outside, minimizing power consumption during peak demand.

Carrier Corp.
Syracuse, NY 13221
Feb 24, 2006 Hybrid Heat(TM) system combines furnace with heat pump, which also acts as air conditioner in hot weather. Operated via electricity, environmentally sound heat pump moves heat without flame and features Puron® non-ozone-depleting refrigerant. System combines heating methods to minimize effects of gas and electricity costs.