Infrax Systems, Inc.
Florida, FL 33781
May 21, 2012 Through flexible approach, SPIDer (Secure Perimeter Intrusion Detection) network helps prevent threats of copper theft and malicious attacks to power substations, generation facilities, and critical infrastructure in Electric Utility Industry. Network consists of 3 levels of detection, providing near real-time verification of remote threats to secure or restricted areas in over 47,000 Substations. Options include fence-based sensors, visual and IR image sensors, and combination of both.

Eagle Product Inspection
Tampa, FL 33634
May 11, 2012 Capable of withstanding impact of repeated use of harsh chemical cleaners and pressurized water, Eagle Pack 400 HC increases uptime and hygiene in wash-down environments. Stainless steel plates, cut and welded together, eliminate food debris collection points, while interlocked hinged louvers facilitate access to conveyor. While water-cooled heat exchanger eliminates need for separate A/C unit, knurled end drive roller with v-grooves ensures conveyor belt traction and position retention.

ABB Instrumentation
Warminster, PA 18974
May 04, 2012 Designed to work with both WaterMaster and AquaMaster 3 transmitters, AquaProbe offers choice of main- and battery-power options as well as renewable power version, which can draw power from solar or wind power. Unit fits pipe sizes from 200-8,000 mm and is fully submersible with IP68/NEMA 6P protection rating. Installed using fit-and-flow intelligent technology, which eliminates need to match flow sensor and transmitter in field, flowmeter is suited for clean water applications.

LumaSense Technologies, Inc.
Santa Clara, CA 95054
Apr 30, 2012 SmartDGA(TM) Guard continuously measures and reports multiple gases - hydrogen, acetylene, and CO - as well as moisture in transformers to help electric utilities improve grid reliability by diagnosing faults before they lead to serious incidents. With modular shape that enables installation within hours, online dissolved-gas analysis (DGA) monitor uses non-dispersive infrared (NDIR) gas sensing technology and is available with fully integrated communications for Smart Grid deployment.

Husky Injection Molding Systems
Bolton, ON L7E5S5  Canada
Apr 11, 2012 Enabling energy monitoring capabilities throughout entire injection molding facility, Shotscope NX® energy module provides systematic approach to identifying and reducing sources of variation throughout entire workcell. This integrated process and production monitoring system can individually monitor all sources of energy consumption. Molders may collect, manage, and analyze production information, enabling real-time adjustment while satisfying regulatory document management requirements.

Nuvation Research Corp, USA
San Jose, CA 95134
Apr 09, 2012 Addressing safety, accuracy, noise immunity, and industry standards compliance needs associated with complex battery systems, 3rd generation Battery Management System (BMS) monitors, balances, and protects large-scale lithium battery stacks. Other battery chemistries, including nickel, are also supported. System can be used to improve battery life, safety, scalability, and fuel gauging of electric vehicles (EVs), all while decreasing charge times.

Columbia Weather Systems, Inc.
Hillsboro, OR 97124
Mar 14, 2012 With 2 ISO second-class compliant solar radiation sensors as options, Weather MicroServer can provide efficiency monitoring for solar panel arrays. Kipp and Zonen and Hukseflux thermopile-based sensors can be mounted horizontally for global radiation measurement or at plane of array for PV solar applications. Used in conjunction with weather stations, Weather MicroServer offers Internet and Industrial protocols for applications including XML, FTP, Modbus/OPC, and SNMP.

GreenPeak Technologies
Utrecht   Netherlands
Jan 09, 2012 Utilizing wireless chips, Smart Junction Box reference design monitors solar systems in detail and controls chain from central unit or remote device. By adding boxes on every panel, real-time status information on electricity generation can be provided. Operator can also switch off individual panels or panel substrings for optimized solar system performance. Data collected from each individual panel can also be shown in configurable GUI software application.

Amerlux, Inc.
Fairfield, NJ 07004
Dec 06, 2011 Along with LED module and built-in speaker, SmartSite(TM) Street Lights feature duo-band radio system and miniature computer with data storage capacity. Street light processors communicate with each other through bi-directional wireless mesh network and monitor individual luminaire usage, energy costs, grid power, and system integrity. Luminaires also offer multimedia solutions that can upgrade existing infrastructure to provide information, advertising, security and entertainment for public spaces.

Teal Electronics Corporation
San Diego, CA 92121
Oct 17, 2011 PVobserver(TM) string monitoring and wireless communication option, available for Configurable Combiner Box, lets operator of commercial or utility scale Solar PV power plant know immediately if individual PV string is underperforming or needs maintenance. SunSpec-Compliant, embedded unit monitors current of each PV module string as well as string voltage and communicates processed data to internet via standard communications protocols and connections.

Skimoil, Inc.
Carrboro, NC 27510
Oct 14, 2011 Especially valuable for vessels that do not have constant filter monitoring, diesel FUEL FILTER ALERT and alarm system provides real-time indication of fuel filter status. Vacuum instrument detects fuel-filter degradation and alerts operators so they can take action before failure. System consists of stainless steel sensors and remote digital display panel with numeric pressure readout, active messages, and graduating, colored-light indicator.

NK Technologies
Campbell, CA 95008
Oct 13, 2011 Packaged in 35 mm wide DIN rail enclosure, VTD Series offers solution for monitoring, detecting, and diagnosing voltage conditions in DC-powered installations, including industrial motors, battery chargers, photovoltaic arrays, and wind generators. Units operate on circuits from 0-15 to 0-600 Vdc and deliver fully isolated 4-20 mA loop-powered output, facilitating use with controllers, data loggers, and SCADA equipment. To maximize safety, input and output circuitry is fully isolated.

Acorn Energy, Inc.
Montchanin, DE 19710
Sep 09, 2011 Addressing needs of large-scale pole top applications at distribution level, TransformerIQ® is installed without shutting off power, is environmentally sealed, and uses battery-less technology, which makes it essentially maintenance-free. Complete solution includes integrated radio/sensor package, secure communications, GUI, text/email messaging, and interface to utility operations, enabling new applications and smart grid objectives.

New Avionics Corp.
Fort Lauderdale, FL 33306
Aug 25, 2011 To conserve energy, Ice*Meister(TM) Model 9734-REFR minimizes frost accumulation on evaporator coils and fins of commercial walk-in refrigerators, reach-in refrigerated display cases, and other self-defrosting chiller systems. Product works by sensing interaction between molecules of accumulating frost and photons of light and then operating defrost heaters only when frost is present. Control can be installed on any refrigerator at factory or retrofitted in field.

E-Mon Corp.
Langhorne, PA 19047
Aug 02, 2011 Suited for campus and multi-building facility applications, Web-Mon(TM) Enterprise Edition provides one-page dashboards of historical and real-time energy use via standard web browser over Modbus IP LAN/WAN networks using Modbus TCP/IP as communication protocol. System displays electrical consumption, peak demand, power factor, Volts, Amps by phase, and VARs. Internal memory stores up to 36 days of 15-min interval data, and user alerts are emailed when kW/kWh usage alarm setpoints are exceeded.

WAGO Corp.
Germantown, WI 53022
Aug 01, 2011 Designed to help identify defective or damaged PV modules, Model 789-620 measures DC currents from 0-80 Adc, while Model 789-621 measures 0-140 Adc. Equipped with dual RJ-45 interfaces, sensors transmit data via RS-485 serial communication lines up to 4,000 ft with accuracy of 0.5%. Feedthrough configuration eliminates need to terminate conductors. Operating in temperatures from -20 to +70°C, both models are addressable via on-unit DIP switch and include operational status LED.

Libelium Comunicaciones Distribuidas S.L.
Zaragoza   Spain
Jun 06, 2011 Waspmote-based Smart Parking platform provides information to city motorists searching for available parking spaces. Buried under parking spaces, robust sensors feature PVC casing and are rated IK10 for mechanical impact protection, IP67 for ingress protection, and operate for 5 yr before requiring battery replacement. Devices use radios at 2.4 GHz or 868/900 MHz for communications and can be programmed and upgraded over radio network without having to dig up parking spaces.

Schweitzer Engineering Laboratories Inc.
Pullman, WA 99163
Jun 01, 2011 Providing IEC and ANSI 0.2 Accuracy Class billing data, Model SEL-735 includes waveform capture, harmonic measurements, and data logging function. Advanced model additionally features high-order harmonics, sample rates, detailed power quality reports, and Ethernet. Integration with energy management software from SEL and others helps users cut energy bills.

ByteSnap Design Ltd
Birmingham B31 2TS  United Kingdom
Jun 01, 2011 ZigBee® module ZMM-01 combines metering and control features in one platform and also provides RTC accurate up to 2 ppm. By implementing the ZigBee Smart Energy protocol, module can use command-set specified by standard to control energy equipment within home or office. Module is based on ZigBee radio-on-a-chip that integrates IEEE 802.15.4/ZigBee wireless transceiver with ARM Cortex-M3 microcontroller, able to run the ZigBee Smart Energy protocol and application code while consuming just 30mA.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
May 23, 2011 Stackable bq76PL536 battery monitor/balancer/protector intelligently measures voltages to maximize available energy for hybrid/electric vehicles, power tools, and UPS applications. Battery management IC also incorporates ADCs for independent cell voltage and temperature protection, cell balancing, and isolated chip-to-chip communication. Also offered in AEC-Q100 automotive-qualified version, IC provides full secondary protection for over- and under-voltage and over-temperature conditions.