Sherwin-Williams Chemical Coatings
Brampton, ON L7A1B1
May 21, 2012 Exhibiting hide, scrub, stain, block, and burnish resistance, Emerald Interior paints prevent stains from penetrating, facilitate surface cleanup, and resist water streaking/spotting. These GreenGuard IAQ certified paints emit minimal odor and feature anti-microbial properties. With 100% acrylic formula, Emerald Exterior paints resist blistering, peeling, chalking, fading, mildew, and dirt pickup. Both are tinted with ColorCast Eco Toners(TM), which maintains paint's full body after tinting.

Aremco Products, Inc.
Valley Cottage, NY 10989
May 10, 2012 By providing lubricious, chemical- and erosion-resistant interface, non-wetting Pyro-Paint(TM) 634-BN protects metal and refractory surfaces from corrosion by molten glasses, metals, plastics, and salts in applications to 1,560°F. This single-part, odorless, water-dispersible, boron nitride-filled coating, applied via brush, roller, or spray equipment, contains no VOCs, dries at room temperature in 1-2 hr, and cures fully in 1-2 hr at 200°F.

Bayer MaterialScience LLC - Polyurethanes
Pittsburgh, PA 15205
Apr 04, 2012 Offering alternative to ceramic coatings, one-component (1K) thermal-cure polyurethane coating addresses requirements of glass decorators, including ability to decorate and label over cured Bayer coating, scratch resistance, and full color palette. Coating does not utilize heavy metals, such as cadmium, and formulation contains 2 waterborne polyurethane dispersions (PUDs), and Bayhydur® blocked polyisocyanate.

Michelman Inc.
Cincinnati, OH 45236
Feb 24, 2012 Effective at thin coat weights of 0.04 dry gsm, Michem Flex P2300 produces adhesion between extruded resins, and paper and film substrates. Single component, optically clear formulation is water-based, contains no VOCs, and requires no curing. Typical users include converters of food packaging, medical packaging, health and beauty product packaging, and industrial laminating stock, as well as film producers and paper converters.

DSM Functional Coatings
Urmond 6129 EL  Netherlands
Feb 15, 2012 Designed to withstand excessive physical impact, thermal shock, and chemical exposure, URelle(TM)-Crete is suited for pharmaceutical and food/beverage facilities. Three-component urethane cement system protects concrete against mechanical abuse and heavy traffic. Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete meets USDA/FDA standards, and is suitable for exposure to wet processing and steam cleaning.

McLube Div., McGee Industries, Inc.
Aston, PA 19014
Jan 19, 2012 Intended for rubber and plastic parts, water-based MAC-1023 dries to clear, colorless film with optimum slip properties and minimal coefficient of friction. Coating is chemically and thermally stable as well as environmentally and worker friendly. In addition to rubber and plastic, product is also suitable for use on composite, sponge, and all types of metal. Applications include automotive assembly, O-rings, seals, bushings, hoses, and grommets.

Crown Polymers, LLC
Huntley, IL 60142
Dec 05, 2011 Formulated to cover unsightly flaws in concrete while becoming monolithic part of concrete, StainedGlaze(TM) is nearly odorless during application, contains no harmful VOCs, and exceeds sustainability Green requirements for LEED® certification. Wear surface, colors, designs, and patterns are renewable without removing entire overlay. Typical applications include dining areas and restrooms as well as commercial, retail, residential, educational, and light industrial locations.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants
Pittsburgh, PA 15205
Oct 14, 2011 Used for restoring water slides, polyaspartic gelcoat technology has life expectancy of years and dry times that accelerate return-to-service - sometimes as soon as 24 hr. Low-odor product is formulated for optimal durability, weather-ability, color and gloss retention, and ultra-low VOC content. This spray-applied, 2-component, ambient-cure gelcoat also has temperature application range that extends season for restoring outdoor slides.

Michelman Inc.
Cincinnati, OH 45236
Oct 06, 2011 FDA-compliant Michem Coat 40Y provides barrier coating for paper and corrugated. Combination of raw materials and proprietary formulation techniques are used to produce coating that is resistant to water, oil, and grease and has optimized release properties. Completely repulpable and recyclable, this hot melt and coldset gluable product maintains stability and can be applied smoothly on rod, blade, or roll coaters either inline or offline.

Michelman Inc.
Cincinnati, OH 45236
Oct 04, 2011 Using advanced raw materials, Michem Coat 40Y is water, oil, and grease resistant with optimized release properties. Product is also hot melt and coldset gluable, and completely repulpable and recyclable. Compliant with FDA standards, Michem Coat 40Y is suited for food contact with items such as produce and other perishables, as well as general industrial and retail applications. Product can be applied smoothly on rod, blade, or roll coaters, either inline or offline.

Sherwin-Williams
Cleveland, OH 44115
Jun 13, 2011 Designed to prevent contamination when transporting and storing dry bulk food products, BPA-free CARFLEX(TM) HS meets FDA 175.300 for direct contact dry bulk storage. Polyamide-cured modified epoxy is formulated for lining rail hopper cars, storage tanks, marine vessels, and grain elevators. It offers corrosion protection and flexibility, and is impact and abrasion resistant. Applied as 1- or 2-coat system, CARFLEX HS is 100% solids, contains zero solvents, and has VOC content less than 100 g/L.

Interstate Products, Inc.
Sarasota, FL 34233
Jun 07, 2011 Approved for use on all non-food contact surfaces, "1" STEP neutralizes existing rust and acts as primer on both rusted metal and previously painted surfaces. Product can be sanded, top-coated with suitable paint, body puttied, or left as is. Non-flammable and non-toxic, water-based treatment can handle light freeze during storage and remains effective after it thaws. It is not recommended for rust stains on moving parts or on hot areas such as barbecues or engines.

Sherwin-Williams
Cleveland, OH 44115
May 19, 2011 Designed to prevent yellowing and gloss reduction from UV light, EnviroLastic AL offers elastomeric performance by bridging gaps up to 1/8 in. Combination of weatherability, crack bridging capability, and adhesion properties make USDA-approved, seamless coating system suitable for interior/exterior walls and ceilings as well as exterior tanks and silos. Applied at thicknesses of 30-250 mils, low-odor, zero-VOC, 100% solids coating offers 3 min tack-free time and 24 hr full cure.

CETCO
Hoffman Estates, IL 60192
May 05, 2011 Suitable for application in confined spaces, water-based Perlastic(TM) coatings impart corrosion protection for industrial applications over metal or concrete. Spray-Grade (SG) 2-part, spray-applied elastomeric membrane can be applied with minimal surface prep and halts corrosion/chemical attack of substrate. Roller Grade (RG) is brushable and used where spraying is not practical. Trowel Grade (TG) trowel-able coating is used in preparation of substrates, such as crack filling and bugholes.

Honeywell International, Inc.
Morristown, NJ 07960
Mar 01, 2011 SOLARC® anti-reflective coating materials are applied through single-sided roller coating application, which reduces amount of material required. Transparent coatings also improve light transmittance through glass that covers photovoltaic panels and minimize glare, which enables panels to better blend in with surroundings. Suited for PV panels that operate from 350-1,100 nm, coating materials also enable panels to withstand harsh environmental conditions.

APV Engineered Coatings
Akron, OH 44301
Jan 25, 2011 Comprised of Kynar Aquatec® resin-based topcoat and elastomeric acrylic basecoat, APV eCoolRoof(TM) optimizes emissivity and total solar reflectance properties of roof's surface. Low VOC product resists UV ray degradation, chalking, water pickup, dirt pickup, staining, and chemicals as well as corrosion, algae, and fungal growth. Field-applied and air dried, APV eCoolRoof meets or exceeds initial Cool Roof Rating Council requirements to reflect sunlight and heat away from structure.

DEK
Rolling Meadows, IL 60006
Jan 19, 2011 Incorporating six-sigma repeatability and parallel print head processing options that maximize uptime, Eclipse photovoltaic (PV) metallization platform offers integrated vision inspection and master controls. Retrofittable modules enable manufacturers to scale production to 1,200, 2,400, or 3,600 wafers per hour (wph). Performance can be upgraded in field; spacer process modules can be deployed at initial installation then exchanged for additional print capacity.

Rhino Linings USA
San Diego, CA 92121
Dec 09, 2010 Rhino(TM) Eco-Coat(TM) helps to reflect sunlight off roof and to improve energy efficiency of building. Aromatic, zero VOC, spray-applied coating for commercial and industrial roofs contains UV stabilizers and leafing aluminum pigment for UV stability. High tensile strength and abrasion resistance enables 2-component product to resist hail, mechanical impact, and pest infestations. It can be used as top coat over Rhino(TM) SPF or as coating for primed metal or concrete roofs.

Birchwood Casey
Eden Prairie, MN 55344 2138
Dec 03, 2010 Utilizing Ion Exchange technology to purify and recycle rinse waters, TRU TEMP® System provides closed-loop, zero-discharge installation, eliminating need for drain connection. System operates at 200°F to avoid hazards of boiling tank and is safe to install in any area of plant. In 30 minutes, system forms .00020 in. thick black magnetite finish. TRU TEMP 100-gallon line utilizes 7 individual tanks, each measuring 24 x 40 x 28 in., and can process up to 4,000 lb of work/shift.

Epoxies Etc.
Cranston, RI 02921-3407
Dec 01, 2010 Designed to cure at room temperature, 2-component 20-2125 Potting, Encapsulating, and Casting Resin cushions and protects sensitive electronic components while imparting very little stress on components during cure or thermal cycling. Hardness can be modified by changing mix ratio of Polyol and Isocyanate. Moisture-resistant with low toxicity, product can be used in wet environments and minimizes employee exposure to dangerous chemicals.