Konica Minolta Sensing Americas, Inc.
Ramsey, NJ 07446
Apr 26, 2012 Designed using optical filter mounted on stable crystalline silicon solar cell, AK-120/130/140 Triple Junction PV Cells include connectors for I-V measurement as well as temperature measurement. Built-in temperature sensor can be connected to temperature controlled stage to achieve and maintain standard test condition of 25°C. Providing durability against exposure to light, cells minimize solarization and ensure stability, even when used over long period of time.

Konica Minolta Sensing Americas, Inc.
Ramsey, NJ 07446
Apr 02, 2012 With optical filter mounted on stable crystalline silicon solar cell, Model AK-300 is used as standardized point of calibration to ensure consistent measurements of newly developed photovoltaic cells. Dye sensitized cell features spectral mismatch error of less than 1% and includes connectors for I-V measurement as well as temperature measurement. Errors in short-circuit current due to multiple reflections is reduced from 1.3% of conventional products to 0.0%.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 24, 2012 For IR and visible light sources, TEFD4300 is clear epoxy device with sensitivity range of 350-1,120 nm. For light sources in IR wavelength from 770-1,070 nm, TEFD4300F is black epoxy device with daylight blocking filter matched with 850-950 nm IR emitters. Both silicon PIN photodiodes offer 17 µA reverse photo current and ±20° angle of half sensitivity. Other features include switching times down to 10 ns, 0.1%/K temperature coefficient of light current, and -40 to +100°C operating range.

SunPower Corp.
San Jose, CA 95134
Oct 31, 2011 Used in regions with high solar irradiance through direct sunlight, C7 Tracker concentrates sun's power 7X to achieve lowest possible levelized cost of electricity (LCOE) for solar power plants. Solution combines single-axis tracking technology with parabolic mirror rows, reflecting light onto 22.8% efficient SunPower Maxeon(TM) solar cells. While modular solar cell receivers allow performance upgrades, Tracker Monitoring and Control System provides wireless control of power plant.

Soitec, Inc.
Peabody, MA 01960
Oct 31, 2011 Concentrator photovoltaic (CPV) system, featuring 28 kW tracker with 100+ m² of module area, is designed to be clustered into over 1 MW blocks that each use one pair of centralized inverters. Configuration boosts energy generation efficiency as high as 30% via Concentrix(TM) technology, and design consists of 12 CPV modules that each generate 2+ kW of peak power. Constructed with silicone-on-glass Fresnel lens, 2-axis tracking CPV systems suit installation sites with direct solar radiation.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Oct 26, 2011 Available in SMT packages, CNY64ST and CNY65ST series are VDE-certified and offer respective creepage distances of 9.5 and 14 mm. Products protect equipment and people from being damaged or injured by high-voltage spike or transient and recurring peak voltage while allowing data to pass from high-voltage side to low-voltage monitoring equipment. With CAT IV working voltages to 600 V and insulation distance greater than 3 mm, products provide range of CTR values from 50%-300% at 5 mA.

Canadian Solar Inc.
Kitchener   Canada
Sep 09, 2011 Available in monocrystalline and polycrystalline versions, ELPS (efficient, long-term photovoltaic solution) technology solar modules deliver cell conversion efficiencies up to 19.5% and power output of up to 265 W. ELPS technology is based on metal-wrap-through architecture, which optimizes front surface exposure to sunlight for increased efficiency. At module level, ELPS allows interconnection on one side. This reduces resistance and increases fill factor for higher power output.

Kopp Glass, Inc.
Pittsburgh, PA 15218
Jul 21, 2011 Available in variety of colors to meet aviation chromaticity requirements, Heated Glass Lens features transparent conductive oxide coating on interior surface that provides electrically conductive surface on electrically resistive lens. Metallic electrodes and leads are attached to deliver electrical field that powers heating application. Preventing snow and ice accumulation on lens, resulting thermal radiation meets arctic testing requirements outlined in FAA Engineering Brief No. 67C.

LEONI Fiber Optics Inc
Williamsburg, VA 23188
Jun 29, 2011 Torsion approved and tested, High-Flex Fiber Optic Cables for SCADA are available in low-temperature models down to -40°C as well as high-temperature versions up to +70°C. Plug-and-play solutions are UV-resistant and rodent proof and are offered with Fastbus, Fast Ethernet, and V Pin connections. Applications include communication and control in solar plants and both onshore and offshore wind turbines.

Marvell Semiconductor Inc.
Santa Clara, CA 95054
May 12, 2011 Built on 40 nm technology, 8-port Alaska® V model 88E1680 delivers 280 mW/port active power consumption at 10/100/1000 Mbps data rates. Energy Efficient Ethernet (EEE) features, based on IEEE 802.3az standard, promote power conservation during idle periods. With mixed-signal design techniques, gigabit PHY addresses need for energy-efficient cloud architectures while delivering cable-length performance of up to 200 m over standard Cat5/5e.

L.J. Star, Inc.
Twinsburg, OH 44087
Dec 20, 2010 Fitting standard E27 or GU10 socket to facilitate change-out, Lumiglas® USL 16-LED and 36-LED sight-glass luminaires produce light without heat via 7 W LED light source rated to 50,000 hr. Lumiglas USL 36-LED luminaire mounts flush to sanitary ferrule using MetaClamp sanitary clamp connection, while Lumiglas USL16-LED luminaire mounts using mounting bracket and allows lighting and viewing to take place through same sight glass. Both models are insusceptible to shock and vibration.

Bulbrite
Moonachie, NJ 07074
Oct 20, 2010 Featuring adjustable dial, LED Multi-Beam MR16 allows user to select any of 6 different beam angles, including 15, 20, 25, 30, 35, and 40°. Each 2 W LED operates on 12 V lighting system, providing CRI of 75, lumen output of 85, and warm incandescent color temperature of 3,000 K. Used with both magnetic and electronic transformers, LED Multi-Beam MR16 is suited for recessed, track, and landscape lighting applications in residential and commercial retrofit installations.

NetVision Mobile
Greenville, SC 29607
Oct 11, 2010 Solar 2130 Hybrid Solar-Battery Surveillance Trailer suspends up to 4 weatherproof Pan/Tilt/Zoom security cameras 30 ft above ground, providing 360° visual range. Camera images can be viewed live anywhere there is Internet access, and cameras can include options such as thermal imaging. Product also includes dual solar panels that provide 250 W of power, as well as on-board shock sensor that detects tampering. Entire system can be set up in 5 min.

L.J. Star, Inc.
Twinsburg, OH 44087
Sep 15, 2010 Available with aluminum or stainless steel housing, Series 55-EX gives operators well-lit, glare-free view of processes through sight glass. Green-technology LED Lumiglas® luminaires produce light without heat and offer extended lifetime of 50,000 hr, making them suited for heat-sensitive processes and sight glass applications. Immune to shock and vibration from process system, each product incorporates three 3 W LEDs and is protected by 1 A miniature fuse.

Avago Technologies
San Jose, CA 95131
Aug 27, 2010 Occupying 13 x 33.56 mm footprint, 10 MBd HFBR-3810Z is suited for isolating frequency inverter and power converter applications in renewable energy installations. Fiber Optic (FO) short link technology pin-to-pin distance of 24.96 mm provides transient voltage suppression of 12 kV according IEC 60664-1. It also allows galvanic isolation on one PCB, promoting compact designs. DC coupled data link does not require data encoding or digitizing circuitry, and receiver has CMOS/TTL output.

Radio Frequency Systems, Inc.
Meriden, CT 06450
May 04, 2010 HYBRIFLEX combines optical fiber and DC power for Remote Radio Heads in single lightweight aluminum corrugated cable. Composite fiber and power cable directly integrates grounding function, and allows operators to connect up to 3 sectors. Designed according to standard RF feeder diameter, product is compatible with RFS CELLFLEX LCF ½ in. and LCF 7/8 in. feeder accessories.

LDD Trading Associates, LLC
Milford, NH 03055
Mar 15, 2010 Available in 6 sizes with outer diameters of 85, 124, 154, 223, 273, and 353 mm, IHR Series comes with red, white, blue, or green Power LEDs. All are equipped with standard diffusion optic for uniform illumination. Optional polarizing optics are available for applications requiring suppression of glare from specular surfaces. Units are suitable for applications requiring high light intensity, illumination of large areas, or long working distances.

OSRAM Opto Semiconductor
San Jose, CA 95134
Dec 08, 2009 With efficiency of 25l m/W, Orbeos OLED panel features a round lamp surface of 80 mm dia, weighs 24 g, and is 2.1 mm thick. Surface-emitting, nonglare panel provides warm white color temperature of 2,800 K, while brightness level is typically 1,000 cd/m² with power input of less than 1 W. Spring contact mounted unit is switched on/off without delay and is continuously dimmable. With lifespan of 5,000 hr, product contains no mercury and emits no UV or IR radiation.

Ludeca Inc.
Miami, FL 33172
Nov 04, 2009 OPTALIGN SMART WIND System is configured with firmware features that ensure measurement accuracy and mounting hardware that is suited for optical alignment of gearbox and generator shafts in wind turbines. Instrument includes Continuous Sweep Mode, static measure mode with up to 8 measurement positions, color backlit TFT screen, and ability to save up to 500 measurement files.

Avago Technologies
San Jose, CA 95131
Nov 03, 2009 Models ACPL-M71T single-channel, high-speed 15 MBd and ACPL-M72T low-power LED drive R2Couplers incorporate CMOS IC for reinforced insulation and signal isolation suitable for automotive/industrial applications. Included IC offers ESD performance of 4 kV Human Body Model and 400 V Machine Model. Units feature LED technology with low driving current/power consumption for high- and low-speed digital applications. They operate in temperatures from -40 to +125°C.