Metalworking Fluid targets aerospace industry.
Quaker Chemical Corporation
Conshohocken, PA 19428
Jan 07, 2013
Designed for machining of aluminum alloys, QUAKERCOOL® 7000 ALF BAF machining and grinding coolant is water soluble as well as boron-free and amine-free. Low alkalinity properties aid in prevention of staining, while wetting abilities result in optimized cutting performance and microbiological growth control without biocide addition. Product also provides cleanliness on tools and machines with good detergency.
Metalworking Fluids target tube and pipe industry.
Cincinnati, OH Oh. 45209
Dec 21, 2012
Providing solvent/oil based rust protection used neat, CIMMILL RP 365 leaves protective film residue for over 1 year of corrosion protection. CIMMILL RP 24-7 water-based rust inhibitor, providing up to 1 year indoor corrosion protection, is VOC-free and meets SCAQMD Rule 1144 standards. Developed to rid sumps of biofilms and built-up debris, CIMMILL SC alkaline sump cleaner provides clean environment for new fluids. CIMMILL 5 straight-oil is chlorine-free and designed for cold pilgering operations.
Cutting/Lubricating Oil has low-VOC, nonchlorinated formula.
Master Chemical Corporation
Perrysburg, OH 43552
Oct 24, 2012
With VOC levels of less than 75 g/L as per Southern California AQMD Rule 1144, TRIM® OM 313 clean running straight oil does not contain any active sulfur, is free of chlorine, and does not stain parts. Suitable uses include form-tapping, thread-rolling, and Swiss screw machines. Offering oxidation inhibition for extended life, oil is proven on steel and bearing steel parts and safe for use on aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze.
Honing Oil meets environmental standards.
Sunnen Products Co.
St. Louis, MO 63143
Jul 23, 2012
With low VOCs, SHO-965 Honing Oil exceeds strictest air quality standards of South Coast Air Quality Management District. In addition to difficult materials such as stainless steel, product works on virtually any metal from aluminum to zirconium, and is effective as general cutting oil for screw machines, drilling, tapping, and reaming. Oil is available in 5 gallon pails, 55 gallon drums, and 330 gallon totes.
Foaming Tester evaluates wind turbine gearbox lubricants.
Herguth Laboratories, Inc.
Vallejo, CA 94590
Jul 18, 2012
Using the Flender Foaming Test procedure ISO/DIS 12152, Flender Foam Test measures and analyzes critical foaming and air release properties of wind turbine gearbox lubricants. Gear pair rotates in oil to be tested, thereby mixing air into the oil. This enables accelerated evaluation of how oil behaves with regard to absorption of air, oil-air dispersion, and surface foam at various temperatures.
Biodegradable Grease serves in extreme temperatures.
Huskey Specialty Lubricants
Norco, CA 92860
Jul 03, 2012
Combining USA-grown natural seed oils, PTFE, and synthetic shear stable thickening system with anti-oxidants, extreme pressure, anti-wear, and anti-corrosion additives, HUSKEY ECO-LUBE EP 2 GREASE provides protection against friction, wear, and corrosion. Multi-service product is suitable for extreme temperature conditions from -20 to 500°F. It is also NSF/USDA H-1 Registered and KOSHER approved for use in all areas where incidental food or potable water contact may occur.
Biodegradable Oil withstands extreme temperatures.
Huskey Specialty Lubricants
Norco, CA 92860
Jun 22, 2012
Designed for extended service under extremely high and low temperatures from -20 to 520°F, HUSKEY BIOBASE EP LUBE is suitable for chains, slides, fans, cables, nuts, bolts, and air tools. Multi-purpose, vegetable oil-based lubricant is NSF H-1 Registered and KOSHER approved, making it applicable in bottling, canning, dairy, and all food processing machinery. Product is available 16 fl oz aerosol cans, 1 gal jugs, 5 gal pails, 15 gal kegs, and 55 gal drums.
Biodegradeable Oil lubricates machine toolways, slides, and guides.
Dixon, IL 61021
Feb 22, 2012
Formulated with vegetable seed oils and friction-reducing additives, UltraLube® Slide Way Oil features load carrying and anti-wear properties that protect help extend part life as well as stick-slip properties that lend to smooth operation and accurate work. Lubricant, available in ISO46 and ISO68 weights, has bio-stable formulation that does not contain any toxic chlorine or sulfur. It may be used on all flat and V-shaped surfaces as well as for horizontal and vertical applications.
Eco-friendly Engine Oil suits compressed natural gas fleets.
Ohio, OH 2824 N
Feb 16, 2012
Consisting of up to 83% re-refined material, ECO ULTRA® completely eliminates new petroleum products from circulation in compressed natural gas fleets while meeting engine manufacturers' specifications and SAE requirements. Formulation provides optimal deposit, wear, oil oxidation, and oil nitration control in typically turbocharged engines fueled by natural gas. Low in phosphorous, ECO ULTRA® is available in SAE 30, 40, and 15W40.
Rubber Lubricant and Anti-Stick Coating facilitates assembly.
McLube Div., McGee Industries, Inc.
Aston, PA 19014
Jan 19, 2012
Intended for rubber and plastic parts, water-based MAC-1023 dries to clear, colorless film with optimum slip properties and minimal coefficient of friction. Coating is chemically and thermally stable as well as environmentally and worker friendly. In addition to rubber and plastic, product is also suitable for use on composite, sponge, and all types of metal. Applications include automotive assembly, O-rings, seals, bushings, hoses, and grommets.
Synthetic Drip Oil is certified to NSF/ANSI Standard 60.
Carrollton, TX 75006
Oct 28, 2011
Meeting NSF/ANSI Standard 60, Ultra-Kleen(TM) Drip Oil is formulated with pharmaceutically pure synthetic base oils with USDA/FDA authorized non-toxic anti-corrosion system. Additives work synergistically with base oils to provide optimal lubrication and corrosion control for water wells, potable water systems, and agricultural irrigation systems. Use of this product helps minimize consumption and extend equipment life.
Cleaner/Lubricant/Penetrant features green formulation.
St. Paul, MN 55110
Jun 16, 2011
Used to loosen frozen/rusted parts or as mold release, EcoLine® CLP maximizes life of machine parts by reducing friction and wear in addition to providing corrosion protection. USDA certified biobased product is non-flammable, non-toxic, and freeze stable and can be removed with common detergents. Safe for use on all metals and most plastics, multifunctional cleaner/lubricant/penetrant (CLP) leaves behind persistent layer that protects against corrosion for up to 24 months.
Water Resistant Natural Oil Emulsions offer Green alternative.
Cincinnati, OH 45236
Mar 17, 2011
Made of natural oils and waxes, NatureShield® Emulsions provide water resistance and beading when used in wood, stone, and concrete coatings, stains, and sealants. With light golden tint, NatureShield 30 tung emulsion offers water-resistant finish that does not darken noticeably and provides wet look on stone surfaces. NatureShield 31 anionic emulsion helps prevent wood from swelling in presence of water, while NatureShield 40 film-forming emulsion provides moderate scratch and mar resistance.
Bio-Based Penetrating Lubricant is recyclable and non-toxic.
G2 Fuel Technologies
Tampa, FL 33646
Jan 14, 2011
Supporting uses from cleaning to lubricating, Bio-Blast(TM) is composed of additives and bio-solvents that provide penetrating catalyst that is non-staining to metals. Product works by driving out moisture, providing dielectric insulation in electrical equipment, and removing rust/dirt. Formulated to penetrate into tight areas and prevent corrosion, lubricant performs with capillary wetting action that reduces surface tension and frees up frozen parts.
Dry Film Lubricant serves as assembly aid.
Nye Lubricants, Inc.
Fairhaven, MA 02719
Dec 08, 2010
Consisting of 15% aqueous dispersion of PTFE, NyeFilm® 501F is applied in wet form, which then dries to surface. Product was developed to have controlled particle size distribution where no particles are greater than 10 microns, allowing for even distribution of PTFE. Environmentally safe, NyeFilm® 501F offers rub and abrasion resistance as well as chemical compatibility with all polymers.
High-Temperature Lubricant uses organic and inorganic content.
ZYP Coatings, Inc
Oak Ridge, TN 37830
Oct 27, 2010
Able to be used in temperatures from ambient to 1,000°C, Keralon-B is brushable lubricant/coating/paint based on organic Methylated Seed Oil and inorganic ceramic mixture of chemically-inert lubricating phases: Boron Nitride, Graphite, and Titanium Dioxide. It performs as oily mixture at room temperature and acts as dry film lubricant above 200°C. Solution is nonreactive/nonwetting with molten metals, glasses, and slags and prevents oxidation/rusting/galling/reactions while lubricating.
Water-Based Cable-Pulling Lubricant is 96% biodegradable.
Carrollton, TX 75006
Sep 16, 2010
Non-toxic, non-bioaccumulative, and chemically inert with low VOCs, Techni-Glide Lubricant contains microscopic poly-spheres that reduce surface contact, enabling smooth cable pulling, even under high sidewall bearing pressures. After drying, there is no sticky residue and product remains slippery. Low aquatic toxicity makes Techni-Glide suitable for marine and port installations as well as any area concerned with ground water, soil, or water contamination.
General-Purpose Cutting Oil is petroleum- and additive-free.
Sunnen Products Co.
St. Louis, MO 63143
Jun 16, 2010
Based on renewable vegetable formulation, SHO-500 cutting oil provides oxidation stability and is suited for honing applications where additives cannot be used, such as nuclear and some aerospace parts. Available in 5 gal pails, 55 gal drums, and 330 gal totes, oil can be used with conventional vitrified honing abrasives and metal-bond super abrasives.
Vegetable-Based Cutting Coolants are safe for all metals.
ITW Rocol North America
Glenview, IL 60025
Jun 09, 2010
Made from naturally derived, vegetable-based oils, Rustlick PowerCool Green and PowerCool Green CF water-soluble oils are formulated to provide optimal lubricity and biostability in heavy-duty cutting and grinding applications. Products are safe for all metals and suited for light- to heavy-duty jobs. PowerCool Green contains chlorinated EP additives, while PowerCool Green CF contains non-chlorinated EP additives and is also recommended for use on titanium.
Cutting Fluids come in concentrated form.
Doall Sawing Products
Des Plaines, IL 60016
Feb 01, 2010
Providing tramp oil rejection and control of bacteria and mold, semi-synthetic Kool-ALL Ultra® extends sump life. Power-Cut Ultra® soluble oil has emulsifiers that mix with water and can handle alloy steels such as 300 series stainless steel. Featuring low foaming tendency, Synthetic Kleen-Kool Ultra® optimizes fines release and hard water tolerance, minimizing grinding swarf and maintaining unclogged grinding wheel. All use recyclable containers and liners that are tamper-resistant.
Green and Clean
|Beyond question, global
warming has become a controversial topic that will continue
to inspire passionate debates around green sources of energy
and sustainability. Regardless of your views, global climate
change affects everyone which means we all play a critical
role in becoming a better steward of the environment. At
ThomasNet, we want to highlight green and clean products and
services that are both environmentally friendly and socially
responsible. As such, we aim to be your one-stop-shop for
the latest news, views, products and services that are
respectful of our planet. Please join our Green and Clean
Community and let us know how we can make Green and Clean
the best it can be.