Formulators, Inc
Santa Ana, CA 92705
Apr 16, 2012 Providing moisture resistance, HydroSeal Maxx does not require vapor suppressants, primers, or membranes. One-part, water-based adhesive produces pressure-sensitive grab after 30 minutes flash time, but remains partially wet, allowing for max surface penetration of resilient tile. Installed like any sheet vinyl adhesive, product can be used over concrete surfaces prepped with concrete-grinding methods and withstands foot traffic in 5 hours. It contains no VOCs and meets REACH standards.

Cree, Inc.
Durham, NC 27703
Apr 13, 2012 Featuring TrueWhite® Technology, which maintains color consistency over rated lifetime of product, LMH2 Series delivers 82 lm/W system efficacy combined with CRI greater than 90 in all available color temperatures of 2,700, 3,000, 3,500, and 4,000 K. Modules separate light source and power supply to enable wide selection of mounting and wiring options. Available with Digital Addressable Lighting Interface and DALI touch dimming, LEDs offer 50,000 hours of operation and are dimmable to 5%.

MaxLite
West Caldwell, NJ 07006
Apr 13, 2012 Flood, security, garage, and canopy lights, designed for outdoor applications in smaller spaces, operate on 120-277 V electrical systems and are available with CCT of 5000K. These maintenance-free LED fixtures, which are ETL, cETL, and FCC certified as well as RoHS compliant, have 50,000 hr life at L70 standards. All fixtures are manufactured with high-ranked binning of LM-80 rated LEDs for color consistency and uniformity, fixtures.

DuPont Microcircuit Materials
Research Triangle Park, NC 27709
Apr 12, 2012 Suited for solar cells built on thin film photovoltaic substrates, whether flexible or stainless steel, DuPont(TM) Solamet® PV416 can be processed at temperatures less than 140°C. Silver paste material provides printed conductivity of 10 mW/sq at 25 microns, low contact resistance of 3 mW.cm², and line resolution of less than 100 microns. These are key properties for optimized performance in CIGS, a-Si, and OPV cells and modules.

Clore Automotive
Lenexa, KS 66215
Apr 12, 2012 After operator selects battery type and desired charge rate, Model 4520 executes automatic charging process, delivering consistent charge every time. Unit includes polarity protection, outputting current only when proper battery connection has been made. Rated at 12 V, 20/10/2 A, charger is compatible with variety of battery types and sizes, including conventional, maintenance-free, AGM, gel cell, deep cycle, and marine batteries.

Acuity Brands Lighting
Conyers, GA 30012
Apr 12, 2012 Inspired by organic shapes of flowers, Revel(TM) Luminaire features thin form factor that lets designers augment architectural elements of ceilings and walls while delivering optimal ambient lighting. Unit can provide accent or functional lighting that breaks away from rectangular grid layouts. Designed to provide individualized canopies of light, Kindred(TM) Luminaire comes in 3 sizes and multiple mounting options, suitable for office, hospitality, retail, residential, and specialty public areas.

SunPower Corp.
San Jose, CA 95134
Apr 11, 2012 Operating from universal 90-264 Vac input, HDP-190/240 Series offers dual 2.8 and 3.8 V outputs that can directly drive 2.8/3.8 V RGB LED chips. Respective ratings for HDP-190/240 are 192 and 241 W, with delivery of up to 40 and 50 A at 3.8 V and up to 22 and 27.5 A at 2.8 V. Both feature active PFC and output voltage adjustment ranges of 3.6-4 V on 3.8 V output and 2.5-3 V on 2.8 V output. AC/DC circuit design and non-isolated DC/DC buck topology allow efficiencies up to 86% (HDP-240).

Husky Injection Molding Systems
Bolton, ON L7E5S5  Canada
Apr 11, 2012 Enabling energy monitoring capabilities throughout entire injection molding facility, Shotscope NX® energy module provides systematic approach to identifying and reducing sources of variation throughout entire workcell. This integrated process and production monitoring system can individually monitor all sources of energy consumption. Molders may collect, manage, and analyze production information, enabling real-time adjustment while satisfying regulatory document management requirements.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Apr 10, 2012 Accommodating aluminum or copper No. 4-14 AWG, Solar Panel Grounding Connectors feature stainless steel hardware and clamp-on design that eliminates need for mounting holes. Connector's body has extruded serrations for breaking anodized finish on photovoltaic modules and frames. Serrations in wire binding break corrosion on grounding wire, eliminating need to prepare surfaces of PV module, frame, or ground wire.

RedMere Technology Ltd.
Co. Dublin   Ireland
Apr 10, 2012 Housed inside connector of thin HDMI eco-friendly cables, PRE169x Series achieves data rates of 3.4 Gbps per channel up to 20 m in length. Modules support 4K2K and 3D rates as well as 1440p DTV resolution, 16-bit color depth, and 120 Hz refresh rates. Embedded technology provides active equalization functionality without requiring external power source, compensating for signal attenuation on differential TMDS data inputs.

Acuity Brands Lighting
Conyers, GA 30012
Apr 10, 2012 Consuming 60 W of input power, LNH LED NEMA Head Series reduces CO2 emissions by .4 metric tons annually and provides estimated product life of 20 years. Luminaires produce efficient white light that is intended for security areas and storage yards as well as rural areas and loading/receiving areas.

Nuvation Research Corp, USA
San Jose, CA 95134
Apr 09, 2012 Addressing safety, accuracy, noise immunity, and industry standards compliance needs associated with complex battery systems, 3rd generation Battery Management System (BMS) monitors, balances, and protects large-scale lithium battery stacks. Other battery chemistries, including nickel, are also supported. System can be used to improve battery life, safety, scalability, and fuel gauging of electric vehicles (EVs), all while decreasing charge times.

ZMDI
Dresden 01109  Germany
Apr 09, 2012 Housed in 24-pin QFN package measuring 4 x 4 mm, Model ZSPM1000ZA1R operates as synchronous step-down converter in single-rail and single-phase configuration with extended operating temperature range of -40 to +125°C. Model ZSPM9010ZA1R DrMOS, housed in 40-pin PQFN package measuring 6 x 6 mm, is equipped with integrated power-stage driver and is optimized for use with ZSPM1000 digital-controller family for non-isolated POL supplies.

Eaton Corp.
Pittsburgh, PA 15272
Apr 06, 2012 With 500, 1,000, and 1,500 kW ratings, Series 6001 is engineered for utility-scale grid-connect battery applications. True low-voltage ride through with proprietary algorithms enables inverter to run near zero line voltage for extended periods while maintaining line synchronization. Housed in indoor/outdoor enclosure with seismic zone 4 rating, 4-quadrant inverter uses liquid-cooled power modules with over 7 million hours MTBF and delivers over 98% peak power efficiency.

Lucid Energy Inc
Portland, OR 97209
Apr 05, 2012 Able to operate across diverse flow conditions, LucidPipe(TM) Power System has lift-based vertical axis spherical turbine that generates electricity by extracting excess head pressure from 24-96 in. dia, gravity-fed water pipelines and effluent streams. Single unit, in standard 60 in. dia pipeline with flow velocity of 7 fps and 12 ft of excess head pressure, can produce up to 100 kW of power. Multiple turbines can be installed in one pipeline, separated by 3-4 turbine diameters.

Mokon
Buffalo, NY 14207
Apr 05, 2012 Available in capacities from 5-15 hp, Iceman SM Series utilizes Copeland Scroll Digital compressor that can provide variable capacity output from 10%-100% by axially separating internal scroll members. Controlled amount of discharge gas is bypassed for varying amount of time, reducing compressor output and conserving energy while maintaining temperature stability. Features include brazed plate evaporator, heavy-duty insulated tank, and stainless steel centrifugal supply pump.

Walter Surface Technologies
Windsor, CT 06095
Apr 04, 2012 BIO-RUST is non-corrosive, biodegradable solution that eradicates rust on iron and mild steel. It is comprised of chelating agents that work to detach iron oxide from steel and is VOC-, solvent-, and phosphate-free. Non-flammable solution does not require special storage or disposal procedures and it can remove 2.2 lbs of iron oxide per 20 L of liquid. It can be used to clean steel prior to painting or coating operations as well as in mechanisms in transportation and military sectors.

Cleversafe, Inc.
Chicago, IL 60616
Apr 04, 2012 Integrating into Dispersed Storage Network architecture, Slicestor Systems feature 4U form factor with 45-drive enclosures to preserve big data assets. Slicestor 1410, offering 135 TB of raw capacity using 5,400 rpm SATA disk drives, is suited for deep archive workloads where protection of data is critical for long-term archival/retrieval. Unit consumes 3.2 W/TB at idle and 3.9 W/TB under load. With 7,200 rpm SATA disk drives, Slicestor 1420 consumes 3.6 W/TB at idle and 4.9 W/TB under load.

Bayer MaterialScience LLC - Polyurethanes
Pittsburgh, PA 15205
Apr 04, 2012 Offering alternative to ceramic coatings, one-component (1K) thermal-cure polyurethane coating addresses requirements of glass decorators, including ability to decorate and label over cured Bayer coating, scratch resistance, and full color palette. Coating does not utilize heavy metals, such as cadmium, and formulation contains 2 waterborne polyurethane dispersions (PUDs), and Bayhydur® blocked polyisocyanate.

FZTech, Inc
New Taipei   Taiwan
Apr 03, 2012 Employing 4 Cree LEDs, MR16-05 series accepts 12 V AC/DC input, runs on 5 W, and allows for illumination from front and back of spotlight. Body enhances heat dissipation, which ensures long life, and unit does not produce any UV, IR, or heat emissions. Suited for discreet installation, series offers luminous flux of 380 (±10%) or 450 (±10%) lm, CCT of 3000K or 6000K, and CRI of greater than 80 (WW) or or 75 (CW). Choice of beam angle includes -30° and 45° options.