Siemens Energy, Inc.
Wendell, NC 27591
Nov 17, 2009 Using high-tech coatings, UVAC 2010 Universal Vacuum Air Collector absorbs solar energy and converts it to heat used to produce electricity. Sputtered selective coatings enable heat loss levels below 9%, while active area to length ratio optimizes solar exposure of receiver. Power block and solar field equipped with solar receivers are key components of parabolic-trough power plants.

Bulbrite
Moonachie, NJ 07074
Nov 16, 2009 Suited for use with portable lamps, as well as recessed and track task lighting, 23 W Coil CFL, 15 W R30 bulb, and 23 W R40 bulb produce 1600, 680, and 1050 lumens, respectively, and offer continuous dimming down to 20% lumen output. They work with most incandescent dimmers and offer life of up to 8,000 hr. Suited for use on 120 V system, compact fluorescents feature E26 base, color rendering index of 82, color temperature of 2700 K, and have minimum starting temperature 0°F.

Global Thermoelectric, Inc.
Calgary, AB T2C2L8
Nov 13, 2009 Ensuring 24/7/365 operation for mission-critical equipment, GlobalSolarHybrid system relies primarily on solar energy to generate power but also uses backup thermoelectic generator (TEG) operating on natural gas or liquefied petroleum gas. Battery life is extended due to shallow cycles, with TEG programmed to turn on and charge battery from optimized level. While 2000 Series suits sites from equator to 40° north latitude, 3000 Series is intended for locales further north.

LEDnovation, Inc
Tampa, FL 33626
Nov 13, 2009 Eco friendly, 60 W equivalent LED A19-60-1N-I and 75 W equivalent LED A19-75-1N-I target downlight and indoor lighting applications. Model LED A19-60-1N-I delivers 600 Lumens with typical efficiency of 79 Lumens/W and consumes 7.6 W, while LED A19-75-1N-I delivers 700 Lumens with efficiency of 71 Lumens/W and consumes 9.8 W. Bulbs have CCT of 3,500 K, and CRI of 85. Recycled Reflectance(TM) optics technology reduces glare and delivers uniform and smooth light output in A19 standard form factor.

LEDnovation, Inc
Tampa, FL 33626
Nov 13, 2009 Available with typical efficiency of 90 Lumens/W, 25 W equivalent LED A19-25-1N-I and 40 W equivalent LED A19-40-1N-I are designed for downlight and indoor general lighting applications. Model LED A19-25-1N-I delivers 190 Lumens utilizing 2.1 W, while LED A19-40-1N-I delivers 345 Lumens consuming 3.8 W. These 3,500 K LED replacement lamps feature Recycle Reflectance(TM) optics technology, to reduce overall glare and deliver extremely uniform and smooth light output.

Phihong USA
Fremont, CA 94539
Nov 12, 2009 Suited for networking and security equipment, 48 Vdc Model PSC75U-480 and 56 Vdc Model PSC75U-560 meet Class B EMI standards and include over-voltage and short-circuit protection, as well as over-current protection with auto-restart. Units are compliant with U.S. EISA as well as ENERGY STAR® EPS version 2.0. Housed in non-vented, spill-proof cases measuring 5.93 x 2.78 x 1.54 in., adapters feature no-load power draw of less than 0.5 W and average operating efficiency greater than 87%.

Phihong USA
Fremont, CA 94539
Nov 12, 2009 Compliant with ENERGY STAR® EPS v2.0 and EISA standards, PSC30U-V universal, 3-wire input desktop adapter series operates above 83.5% typ efficiency and features max no-load power draw of 0.3 W. It comes in 4.59 x 2.17 x 1.24 in., non-vented case and is available with 12, 24, and 48 Vdc outputs. Additional features include Class B EMI compliance, over-voltage protection with automatic shut down and recovery after AC power reset, as well as over-current protection with auto restart.

Phihong USA
Fremont, CA 94539
Nov 12, 2009 Suitable for portable equipment, networking, and gaming, 3-wire input Model PSAA60M and 2-wire input Model PSAA60W are available in 12, 15, 18, 24, and 48 V single output models, all of which are ENERGY STAR® EPS Version 2.0 compliant. Units feature no-load power consumption of less than 0.5 W, meet Class B EMI standards, and include over-voltage, over-current, and short-circuit protection with automatic reset. Housed in non-vented, spill-proof cases, adapters operate from 0-40°C.

Infinite Power Solutions
Littleton, CO 80127
Nov 12, 2009 Consisting of miniaturized plug-and-play modules with integrated power management and solid-state energy storage, INFINERGY(TM) Micro Power Modules facilitate design and adoption of self-powered, micro-electronic systems using ambient energy. When combined with energy harvesting devices such as photovoltaic cells, piezo-electric materials, or thermal-electric generators, INFINERGY MPMs are continually recharged and provide perpetual power that lasts lifetime of system.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
Nov 09, 2009 Designed with modified polyphenylene ether thermoplastic (mPPE), RoHS compliant UL AWM 11028 wires are available in sizes from 28-10 AWG with solid or stranded tinned copper conductors. Rated for operating temperatures to 105°C, units meet UL VW-1 flammability standards. Non-halogenated insulation contains no heavy metal pigments, allowing manufacturers to meet Waste Electrical and Electronic Equipment requirements.

Burton Medical Products Corp.
Chatsworth, CA 91311
Nov 06, 2009 Engineered for extended life and conservative energy usage, AIM LED light uses 21, 20,000 hr-rated LEDs in 3 modules to provide 45,000 lx illumination at 1 m while requiring 84 W of power. CRI is 92, color temperature is 4,300°K, and Y-shaped design minimizes obstruction of light into surgical field while providing adjustable light pattern without casting shadows. Also, 360° limitless arm-and-mounting-system rotation provides 63 in. max reach and 10 ft dia.

Phihong USA
Fremont, CA 94539
Nov 05, 2009 Available in 5 and 9 Vdc outputs, PSC12x Series consists of A, E, K, S, and C fixed plug versions for use in US, Europe, UK, Australia/New Zealand, and China, respectively. Units are double insulated, meet Class B EMI standards, and feature short-circuit protection with auto-restart, as well as over-current and over-voltage protection. Per ENERGY STAR Level V efficiency standards, all models feature power draw of less than 0.3 W at no-load.

Philips Lighting Co.
Somerset, NJ 08875
Nov 05, 2009 Optanium® T8 programmed start parallel electronic ballasts, designed to maximize energy savings, enable independent lamp operation, which allows exact identification of expired lamps. Hot restrike feature allows users to replace lamps without cycling power, while striation reduction feature minimizes chance of striation issues when used with standard/energy-saving lamps. They are available with .88 balast factor and meet NEMA/CEE energy efficiency requirements.

Lighting Specialties
Buffalo Grove, IL 60089
Nov 03, 2009 Wolf EcoFlex features grooved aluminum head that rotates 340° vertically and 90° horizontally and incorporates four 1 W dimmable white LEDs that are optically mixed to produce even light pattern. Thermal engineering allows LEDs to achieve rated life of 50,000 hr, and 25 in. flexible arm lets user aim light where it is needed. Designed to be environmentally friendly, lamp offers light intensity of 500 fc at 12 in.; 2,000 fc at 6 in.; and 5,000+ fc at 3 in. or less.

Cree Inc.
Durham, NC 27703
Nov 03, 2009 XLamp® XP-C LEDs come in cool white with up to 107 lumens at 350 mA. Warm white models are available up to 80 lumens at 350 mA. They are offered in ANSI-compatible chromaticity bins for cool and neutral white and in ANSI-compatible warm white bins.

Larson Electronics, LLC
Kemp, TX 75143
Nov 03, 2009 With 400 W of solar panel collection and deep cell gel style 366 A hr batteries, SPG366A-400 can provide area lighting for events, work sites, and remote areas. Trailer-style, solar-powered generator has integral light tower, and wheeled base includes trailer hitch, rubber torsion axle, and pneumatic compressor. Latter elevates light mast, which can hold several LED lights - including 7,200 lm LED10W-9S or 14,400 lm LEDLB-80X2. Dual gel pack batteries support 366 A for 20 hr.

SunPower Corp.
Sunnyvale, CA 94085
Nov 02, 2009 Incorporating 128-cell, 400 W solar panels for maximum energy output, T20 Tracker generates up to 3.7 kW of power and, by following the sun, delivers up to 30% more energy than fixed tilt systems of same capacity. Single-axis, ground-mounted tracker has mechanical structure that lends to wind resistance and employs minimal moving parts. Included PV tracker control system offers real-time tracker status updates, remote monitoring/control, and energy production optimization algorithms.

Energy Conversion Devices, Inc.
Rochester Hills, MI 48309
Oct 30, 2009 Weighing 2 lb/ft², UNI-SOLAR PowerTilt(TM) is suited for low-load bearing roofs. Rack-mounted system, manufactured for Building Applied Photovoltaic (BAPV) market, is available in 136 or 144 W/panel ratings and can be installed without structural roof reinforcements. Glass-free and encapsulated in UV-stabilized, weather-resistant polymers, system will withstand wind, hail, and impacts. Integrated mounting frame installs without roofing penetration.

Saelig Co., Inc.
Pittsford, NY 14534
Oct 29, 2009 Featuring built-in energy storage and management, AnyWhere Solar Lighting Kits eliminate need for separate battery and controller in solar home system installation. Kits convert electrical energy to light with 23% efficiency and can generate 240 lumens for 4-6 hr per day on any sunny day worldwide. Light output of smallest AnyWhere Lighting Kit is comparable to 40 W incandescent bulb or 7 W CFL. Pull-switch enables dimming to minimize energy consumption.

JKL Components Corp.
Pacoima, CA 91331-2376
Oct 29, 2009 With single chip construction utilized for precise focus and optical properties, Z-MR16-5W series of MR16 LED lamps suit applications for illuminating display cases, shelving, and cabinets. RoHS compliant units are offered in range of whites, from 2,700-7,200 K, and illumination angles of 10°, 38°, and 60°. Devices operate from 12 V LED power and are available with two sockets: 2993-G5 with brass insert for mounting and 2993-G6 with standard mounting holes.