TMI International, LLC
Pittsburgh, PA 15205
May 10, 2013 By reducing exposure time between environments, 6000 Series, which includes Screen-Pro®, Vinyl-Pro, and Bird-Pro roll-up screens, doors, and barriers, minimizes unwanted insect, bird, dust, and particle infiltration. External jackshaft motor moves doors at 36 ips, allowing service in various applications. Products separate differing environments within and around facility while also helping meet AIB International Consolidated Standards for Inspection.

Phoenix Technologies
Bowling Green, OH 43402
Apr 24, 2013 Consisting of food-grade, melt-extruded recycled PET pellet, LNO™ w Resin targets both blow molded and thermoformed applications for water, cold-filled beverages, deli trays, and fruit tubs which are not subjected to heat, either in filling process or during consumer usage. Product can be used at levels up to 100%, or blended with virgin PET. Resin is additionally suitable for personal care packaging applications.

Altuglas International
Philadelphia, PA 19103
Apr 10, 2013 Formulated of acrylic glass for optimal uniformity and light distribution, Altuglas® acrylic sheet helps reduce energy consumption and number of LEDs installed in applications ranging from signage to architecture as well as interior and exterior design. Material, which is resistant to UV and atmospheric agents, may me thermoformed and lends itself to forms of complex designs. Altuglas® LED system offers 10 colors, while Altuglas® Night & Day offers 4 colors and 2-in-1 day and night effect.

Bradley Corp.
Menomonee Falls, WI 53051
Mar 13, 2013 Combining sink, faucet, and dual-sided hand dryer, Advocate® AV-Series provides sustainable hand-washing solution that helps prevent unsafe floors by eliminating need for person to move from sink to hand dryer with wet hands. Commercial ADA-compliant system is made with Terreon® solid surface material, which is GREENGUARD certified as low-emitting material. Hygienic infrared 0.38 gpm faucet cuts water usage by 24%, while infrared hand dryer rids moisture on hands in less than 15 seconds.

Epoxies Etc.
Cranston, RI 02921-3407
Mar 12, 2013 Offering alternative to injection molds when encapsulating electronics, 20-2180 Polyurethane Potting and Encapsulating Resin can be poured into metal or silicone mold to create assembly with firm seal around jacketed wires. Rubber-like texture makes it suited for outdoor applications. Resistant to moisture and chemicals, stable and vibration-resistant product has 2:1 mix ratio, self-levels around components, and will not crack. Base is natural oil polyol.

Zoneworks
Milwaukee, WI 53223
Feb 05, 2013 Designed to enclose compactors and dumpsters at loading dock, CE Series helps maintain consistent temperature and humidity levels inside facility, while keeping wind and inclement weather out. Construction consists of steel framework, insulated curtain wall panels, and corrugated steel roof with skylight. Multi-layered insulated panels have 18 oz, industrial vinyl fabric surrounding anti-microbial polyester batting. Through magnetic access openings on both sides, exterior access is possible.

Magnetek
Menomonee Falls, WI 53051
Feb 05, 2013 Eliminating need for dynamic braking resistors, AC Line Regenerative Systems take surplus regenerative energy from motor and return it to AC power source, reducing total energy consumption and improving energy efficiency by 40–45%. These industrial grade units are available in 2 types: IMPULSE®•R units are offered with ratings from 5–100 hp, while IMPULSE®•D+ HHP modular, regenerative inverter platform is suitable for applications beyond 200 hp.

Cecor, Inc.
Verona, WI 53593
Jan 18, 2013 Mounted on electric, 48 V Columbia Par Car Truck, CP50-200/200CB5 Combination Coolant Sumpcleaner/Dispenser is equipped with 200 gallon tank for collecting and filtering dirty coolant and 200 gallon tank for dispensing clean coolant. Utilizing pump powered by Kohler 20 hp, 4-stroke engine with electric start, sump cleaner pumps fluid at 110 gpm and generates suction to 13 in. Hg. Dirty coolant passes through F23 filter which separates chips and swarf and can hold 2.3 ft³ of solids.

Daimer Industries Inc
Woburn, MA 01801
Jan 02, 2013 Providing pressure levels to 115 psi and steam temperatures to 364°F, EPA-compliant KleenJet® Supreme 3000CVP is equipped with Advanced Thermal Ionic Sanitization® technology, making it certified to kill up to 99.999% of deadly pathogens. Totally Sealed Water Capture™ works with vacuum to draw substances from most hard and soft surfaces directly into extractor chamber for disposal within minutes. Acting as backup to Water Capture, HEPA filtration collects stray substances down to 3 microns.

Gardner Denver Nash
Trumbull, CT 06611
Dec 28, 2012 Designed to operate in demanding environments, both 2BE3 and 2BE4 are available in carbon steel and stainless steel. Each model comes with corrosion- and erosion-resistant, polyisoprene-lined body, and inlet configuration allows for both top and side inlet arrangements. Model 2BE4 offers capacities from 1,500–1,900 cfm, and allows operation over entire vacuum range without need to change pump internals. With center shroud, split vacuum operation to 12 in. Hg differential is possible.

DENSO Corp.
Aichi 448-8661  Japan
Sep 11, 2012 Cold Storage (CS) Evaporator limits increase in vehicle cabin temperature during idle stop when stop/start technology is employed, helping maintain occupant comfort while also increasing vehicle fuel efficiency. Cold insulator, located in heat exchanging area, stores cold energy to be used to cool in-vehicle cabin air while engine and air-conditioning cycle is off in idle-stop state. Closed case features inner fins and internal cold insulation.

Adwest Technologies, Inc.
Anaheim, CA 92806
Aug 22, 2012 Provided in skid-mounted, prepiped and wired modules, Flameless RETOX Regenerative Thermal Oxidizers feature flow rates from 1,000-80,000 cfm and are suited for dust and particulate laden VOC processes. Units provide 99% VOC abatement with dual chamber, corrosion-resistant ceramic heat exchanger rated up to 97% effective for primary heat recovery. Flameless natural gas injection operation does not generate any NOx byproducts during VOC combustion and oxidation process.

The Borealis Group
Port Murray, NJ 07865
Aug 13, 2012 Used for creation of lightweight, transparent, non-opaque, colored hinge closures, BorPure(TM) RF490MO achieves stiffness levels and dimensional color stability via Borealis Nucleation Technology (BNT) while retaining impact performance of existing random PP grades. Fluidity facilitates processing for smooth production cycle and properties preserve desired product taste and appearance. This product is approved for use in food contact applications.

Fortrans Inc.
Wendell, NC 27591
Jul 23, 2012 Designed to deoxidize and brighten aluminum surfaces, Safe-Bright(TM) is non-regulated by DOT and carries HMIS code 1. Product will not attack or etch glass and is safe to use on painted surfaces, chrome-plated hydraulic rams, plastic, and rubber seals. Formulated with no hydrochloric acid, Safe-Bright does not produce corrosive fumes or vapors and is very low odor. Product is useful for removing hard water and acid rain staining from painted surfaces.

Waters Corp.
Milford, MA 01757
Jul 12, 2012 Optimizing laboratory analysis of mycotoxins, DON-NIV(TM) WB Immunoaffinity (IA) column simultaneously screens for deoxynivalenol (DON) and nivalenol (NIV), trichothecene mycotoxins produced by fusarium molds. System also features liquid chromatography analysis, to recover most DON and NIV, and maximizes productivity of research laboratories. It uses monoclonal antibody technology for sample preparation. Column also meets EU regulations for recovery of DON in human food and livestock feeds.

Wacker Chemical Corp.
Chino, CA 91710
Jun 28, 2012 Based on vinyl acetate-ethylene copolymers, VINNAPAS® EP 8010 permanently bonds challenging paper and cardboard surfaces, such as coated or painted paper, and polymeric film. Aqueous dispersion is manufactured without use of alkylphenol ethoxylates and makes supplementary plasticizers unnecessary. Delivering heat-resistant bond, product is suited for formulating adhesives used in food packaging bags and up-market folding boxes, as well as laminated products for car interiors.

TENNANT
Minneapolis, MN 55426
May 31, 2012 Made using 95% plant-based BiOH® polyol, Eco-ITS(TM) bio-based urethane floor coverings are designed to protect floors in manufacturing, industrial, and warehousing facilities. Sustainable coating application improves productivity and minimizes shutdowns. Available in clear or various colors with gloss or satin finish, product offers 21 g/L VOCs (clear) and 23-46 g/L VOCs (color) and qualifies for multiple LEED® credits.

Momentive
Albany, NY 12211
May 14, 2012 By surrounding fragile solar cells of crystalline PV module with flexible, stress dissipating silicone matrix, SilTRUST Encapsulant helps maximize performance in harsh outdoor environments while optimizing light-to-electricity conversion yield. Refractive index of transparent encapsulant closely matches that of glass, minimizing energy-dissipating reflection of sunlight away from solar cell. At 80°C, silicone module is virtually stress-free.

The Borealis Group
Port Murray, NJ 07865
Mar 16, 2012 Offering optimal balance of stiffness, flow, and impact performance, RJ901MO allows stable stacking of finished articles as well as production of complex shapes or long, narrow lengths. Product features transparency and gloss, plus non-yellowing effect, making it suited for thin wall packaging and houseware applications, such as storage boxes and CD/DVD cases.

Teknor Apex Co.
Pawtucket, RI 02861
Feb 21, 2012 Featuring petrochemical content of 35% or less, BioVinyl(TM) Flexible Vinyl Compounds incorporate phthalate-free DOW ECOLIBRIUM(TM) Bio-Based Plasticizers, which are manufactured using plant byproducts and can help minimize greenhouse gas emissions. Typical applications include consumer and industrial products, automotive components, certain medical devices, and certain wire and cable uses.