ThomasNet News^® - Literature and Web Sites

New Videos Demonstrate the Ease of Using Portable Infrared Analyzers for On-Site Measurement ...

info@productnews.com (ThomasNet News�) — Wed, 23 May 2012 00:00:00 -0400

Wilks Enterprise is pleased to announce several new videos that demonstrate the ease of using portable infrared analyzers for measuring the level of total oil and grease in water. These short videos show how on-site measurements with the InfraCal TOG/TPH Analyzers take just a few simple steps to obtain accurate part per million (ppm) results in under 15 minutes. They are readily used by non-technical personnel and eliminate the need to wait for off-site lab results. Regular on-site ...

Eriez® Releases New Video Spotlighting Company's Orange University® Mobile ...

info@productnews.com (ThomasNet News�) — Tue, 22 May 2012 00:00:00 -0400

Erie, PA - Eriez® has released a new video showcasing the Orange University® mobile training and education center. The two-minute video can be viewed from Eriez' website at www.eriez.com/Content/Videos/. In the video, Eric Confer, Orange University Pilot, offers viewers a guided tour of the Orange University mobile training and education center, a 38 foot Winnebago® equipped with Eriez products for food, pharmaceutical, chemical, processing, plastics and most manufacturing ...

Waste Gas as an Alternative Fuel

info@productnews.com (ThomasNet News�) — Mon, 21 May 2012 00:00:00 -0400

Be it syn-gas, methane, digester or flare gas, there are several control schemes and burner designs that can be used to burn the waste gas thus lowering your overall fuel bill. The first assumption here is that you have a need for steam or hot water at your facility. The other issues that need to be considered are the total supply of the gas, BTU content, can you store the waste gas for a period of time, and how stable you need the output to maintain your end process. The BTU content ...

New Website Provides all one Needs to Know About Nonstick Coatings for Housewares

info@productnews.com (ThomasNet News�) — Thu, 17 May 2012 00:00:00 -0400

May 2012, Elverson, PA. Whitford, makers of the world's largest, most complete line of nonstick coatings, recently revised their Product Knowledge Network (PKN) website, which was originally launched in 2006. The PKN was - and is - dedicated to easy-to-read, straightforward product information, everything anyone needs to know about nonstick coatings for housewares products such as cookware, bakeware and small appliances. This makes it easier to develop, buy and source the right coating at ...

Prototek is Now Omnidevice Friendly

info@productnews.com (ThomasNet News�) — Tue, 15 May 2012 00:00:00 -0400

Here at Prototek Sheet Metal Manufacturing, we have always realised the importance of visibility on the web since 1990 when we created our own initial web site. Since then, we have been ever expanding our web presence by undergoing site design and coding upgrades to retain quick site load times and user interface simplicity, while including our full capabilities of quick turn sheet metal and machining prototypes and short run productions. As the times change, so do we. We believe it to be ...

This story is related to the following:
Software

Search for suppliers of: Software

MPI Launches Redesigned, User-friendly Website

info@productnews.com (ThomasNet News�) — Tue, 15 May 2012 00:00:00 -0400

Highland, MI (May 15, 2012) - Magnetic Products, Inc. (MPI), a worldwide provider of both magnetic and nonmagnetic material handling solutions, has launched its new image-rich website (www.mpimagnet.com), which displays a catalog of over 1,000 items. Along with an improved on-line purchase function, visitors will be able to browse the company's product catalog by industry, product group or specific item. The updated site also includes an on-line chat feature, which allows a visitor to ...

Caster Concepts Launches Official Conveyor Concepts Website

info@productnews.com (ThomasNet News�) — Tue, 15 May 2012 00:00:00 -0400

ALBION, Mich. (May 15, 2012) - Caster Concepts, Inc., an industrial caster and wheel manufacturer, launched conveyor-concepts.com today as the official website for its newest business venture Conveyor Concepts. The new site will be dedicated to products developed and manufactured by Conveyor Concepts using Caster Concepts' core competencies. "I am excited about sharing this part of our business with the entire world," said Caster Concepts President and CEO Dr. William Dobbins. "We have ...

Webinar Explains New Foundation for Image-Based Barcode Readers

info@productnews.com (ThomasNet News�) — Mon, 14 May 2012 00:00:00 -0400

NATICK, MA - May 14, 2012 - Cognex Corporation (NASDAQ: CGNX), the world's leading supplier of machine vision systems, invites you to join 31-year veteran and Cognex co-founder Bill Silver for an online presentation explaining a completely new foundation for image-based barcode readers. Please join us, as Bill, one of the most prolific and influential inventors in industrial machine vision, presents "A New Foundation for 1-D Barcode Reading: Hotbars(TM) Image Analysis Technology" in a live ...

Heimatec Relocates, Offers New Literature

info@productnews.com (ThomasNet News�) — Mon, 14 May 2012 00:00:00 -0400

Tooling supplier expands headquarters, offers specific machine tool brand product lines, detailed in new full-specification catalogs Heimatec, Inc., the North American operation for a world leader in live tools, angle heads and multi-spindle drill heads, today announces it has relocated to substantially larger headquarters near Chicago. According to company president Preben Hansen, "We made this move to increase our inventory and our staff to better serve the growing ranks of our customers, ...

Agilent Technologies Offers DVD with 2012 DesignCon Material

info@productnews.com (ThomasNet News�) — Fri, 11 May 2012 00:00:00 -0400

What: A composite of the 2012 DesignCon educational forums & workshops. This new DVD showcases tools, demos, videos, and presentations including: <li> Design and Simulation <li> Validation of a Model <li> Debug, Validate and Characterize <li> System Test <li> Compliance Testing <li> Compliance Standards Information When: Available now Where: www.agilent.com/find/HSD-Pinpoint Additional Information: www.agilent.com/find/HSD

This story is related to the following:
Services

Herguth Laboratories, Inc., Launches New Website

info@productnews.com (ThomasNet News�) — Fri, 11 May 2012 00:00:00 -0400

Vallejo, CA - May 2012 -- Herguth Laboratories, Inc., a leading provider of high quality, full service analyses of oil, fuel, grease, refrigerants, coolants and other maintenance fluids, is pleased to announce the launch of our new website at www.herguth.com. The redesigned website has been structured to provide both new visitors and returning clients with a more navigable, informative, and user-friendly experience. In addition to its bright, clean overall look, we've developed several ...

Harper Launches Webinar Series on Maximizing the Production Economics of your Thermal ...

info@productnews.com (ThomasNet News�) — Thu, 10 May 2012 00:00:00 -0400

Harper is proud to present a new webinar series from our seasoned experts focused on maximizing the production economics of your thermal processing system. Harper will help put together the puzzle of identifying opportunities for improvement in operations and optimizing your equipment investment. In this multi-part series, participants will get access to the know-how of Harper's industry-leading experts, with decades of experience in thermal processing for a variety of advanced materials and ...

J&J Truck Equipment Launches Website

info@productnews.com (ThomasNet News�) — Thu, 10 May 2012 00:00:00 -0400

New Design Offers Easy Navigation, Updated Photos, and In-Stock Section Somerset, PA - (May 10, 2012) J&J Truck Equipment, a division of Somerset Welding & Steel, today announced that the company has launched a newly designed website. The site, www.jjtruckequipment.com, features an in-depth look at the products and services the company offers, an in-stock inventory list, company newsletters, and an easy method for customers to request more information. "In today's fast paced environment, a ...

EDM Parts Distributor Novotec USA Launches New Website to Boost Sales

info@productnews.com (ThomasNet News�) — Wed, 09 May 2012 00:00:00 -0400

Distributor of EDM parts and consumables for the metalworking industry, Novotec USA recently launched its new website with ThomasNet to boost sales and increase Internet presence. The new website features product information for all available EDM suppplies including wear parts, filters, resin, EDM wire, graphite, and accessories, tubing electrodes, and small hole drilling EDM machines. Novotec USA is proud to offer such supplies for Agie, Brother, Chamilles, Fanuc, Hitachi, Japax, Makino, ...

Release of Newly Redesigned PROCECO Website

info@productnews.com (ThomasNet News�) — Wed, 09 May 2012 00:00:00 -0400

PROCECO is pleased to announce the release of our newly redesigned website. Along with a fresh new look, we have improved site navigation and organized the content by product group and industry-typical applications. We hope these improvements will help our customers quickly find an effective solution to their parts cleaning and surface treatment process needs. Information such as product brochures, application case studies, and white papers are available to download in easy steps. For ...

Work Access Lift Application Guide

info@productnews.com (ThomasNet News�) — Wed, 09 May 2012 00:00:00 -0400

Safety is the prime purpose of all work access lifts. They are designed to move production personnel, their tools and materials to ergonomically sound work positions to enhance both worker safety and efficiency. Production tasks are broadly varied and may include welding, painting, assembly, fabrication, inspection and maintenance. Because each application is unique to the task being performed and the object being worked on, each lift must be custom designed to the specific application. This ...

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - PNANewsletter Ad

Search for suppliers of: Scissor Lifts | Platform Lifts | Vertical Lifts

Mold Building Trends for the 1st Quarter of 2012

info@productnews.com (ThomasNet News�) — Wed, 09 May 2012 00:00:00 -0400

The following research and information was published by Mountaintop Economics & Research Inc. and written by Bill Wood, Plastics Market Economist at Mountaintop Economics & Research Inc which was released on March 7, 2012. Bill Wood writes: "The recent uptrend in overall business levels for North American moldmakers was not only extended in February, it accelerated. The Mold Business Index (MBI) for February is 56.6 which is a 2.7 point increase from the January value of 53.9 and a 3.3 point ...

Vacuum Inlet or Exhaust Trap White Paper Cites Considerations for Selection

info@productnews.com (ThomasNet News�) — Tue, 08 May 2012 00:00:00 -0400

A new white paper that outlines key considerations for selecting the optimal vacuum inlet or exhaust trap and trapping configuration for any pump application, in order to extend system uptime, is being offered by MV Products, Division of Mass-Vac, Inc. of North Billerica, Massachusetts. The Practical Considerations for Selecting an Inlet or Exhaust Trap for a Vacuum System White Paper describes the importance of carefully selecting the proper trap relative to the process, illustrates and ...

TURCK Introduces New Tray Cable White Paper, Detailing Uses, Standards and Applications

info@productnews.com (ThomasNet News�) — Mon, 07 May 2012 00:00:00 -0400

Minneapolis, MN - May 7, 2012 - TURCK releases a new white paper, Identifying Tray Cables for Your Next Installation, to assist operators in defining, selecting and understanding tray cable uses and standards. The white paper is available for immediate download at www.askturck.com or on the TURCK website. While the term 'tray cable' is being heard everywhere, many users still do not know what exactly a tray cable is or how it benefits certain applications. This white paper will help ...

FasTest FasCal Brochure Details Connector Offering, Capabilities and Application Suitability

info@productnews.com (ThomasNet News�) — Mon, 07 May 2012 00:00:00 -0400

Minneapolis, MN - May 7, 2012 - FasTest announces the latest edition of its FasCal Calibration Connection Devices Brochure, which can be conveniently downloaded or is available in print by request. This comprehensive, 28-page resource details FasTest's innovative line of FasCal calibration products, specifically designed to overcome common challenges experienced when calibrating instruments such as transmitters, pressure gauges and transducers. Offering a wide variety of connectors and ...

Emedco Launches Thousands of New Products