Honing Machine handles prototype to production volumes.

Press Release Summary:




Merging Siemens 9 in. touchscreen PLC and digital-servo drives with servo-hybrid tool feed system, Model SH-4000 is engineered for medium to high production of parts with bore diameters from 0.060–6.50 in. Horizontal honing machine features 5 hp spindle drive and 1.5 hp stroker drive with 15.75 in. stroke length for deep bores. Spindle speed is infinitely adjustable from 200–3,000 rpm with stroke rates of 10–550 spm. In addition, cutting pressure can be adjusted in 1 lbf increments to 500 lbf.



Original Press Release:



New SH-4000 Introduces All-Digital, Servo-Stroke Honing for Prototype to Production Volumes



Successor to models that have sold 2,400 machines, the horizontal SH-4000 introduces servo-precise, digitally repeatable performance, intuitive touchscreen HMI, infinite part program storage, larger workpiece capacity and operator-friendly safety features.



From its advanced styling and touchscreen HMI to its digital repeatability, Sunnen's new SH-4000 is barely recognizable as the successor to a line of general-purpose honing machines that boasts 2,400 units in shops across the world. This next-generation of power-stroked honing machines merges a Siemens touchscreen PLC and digital-servo drives with a patent pending servo-hybrid tool feed system, extreme repeatability, and clear adjustable guard/light curtain for faster, operator-friendly setups. The SH-4000 is engineered as an easy-to-use, flexible hone for medium to high production of parts with bore diameters from 1.5 to 102 mm (0.060" - 6.50"). It is capable of processing a wide variety of part sizes and configurations, and cutting all kinds of materials quickly and efficiently. It features a 4.1-kW (5 hp) spindle drive and 1.1-kW (1.5 hp) stroker drive with 400 mm (15.75") stroke length. Spindle speed is infinitely adjustable from 200 to 3,000 rpm, with stroke rates of 10 to 550 SPM.



With 45% fewer parts and greater reliability than its mechanical predecessors, the SH-4000 introduces patent-pending digital-servo tool feed and cutting pressure control for consistent, predictable performance throughout the pressure range. Cutting pressure can be adjusted in 4.5 N (1 lbf) increments to a new maximum of 2,224 N (500 lbf), double the maximum of earlier models. The digital system provides superior feed control at low pressures for improved honing results with small-diameter parts. The higher cutting pressure, plus two-step honing capability, ensures short cycle times. Two-step honing allows high stock removal coupled with a precise finish step, all in one operation. In addition, the new tool feed system includes 20 mm (0.79") additional travel for increased diameter range when using high-production MMT tooling.



The new servo ballscrew stroker delivers extreme precision and repeatability for honing in blind bores, while a longer stroke length of 400 mm (15.75") allows the new machine to take on deeper bores. For fastest setup, the machine's stroking system can be controlled with a joystick on the operator station.



The SH-4000 can use all the same tooling and fixturing as predecessor EC and ML machines, and a new true-running spindle with direct collet connection allows quick setup or changeover with MMT tooling. A quick-setting runout-adjustable adapter allows installation of standard Sunnen tooling, such as K mandrels. Side access to the workzone enhances operator ergonomics during setup and facilitates integration with part-handling automation.



The Siemens 225-mm (9-inch) touchscreen control features infinite part program storage and intuitive setup and run screens to allow inexperienced operators to run the machine as efficiently as a veteran. A new digital honing indicator is user-configurable. Standard control features include saved setups, zero shutoff, stone wear compensation, feed speed regulation (stone saver), two-step feed, spindle reverse, speed changes while in cycle, inch/metric selectable units, system diagnostics, cycle dwell, in-process short stroking and 13 operator languages.



The SH-4000 easily adapts to floor space limitations with an electrical cabinet that can be specified on the rear or either side of the machine. Generous free space in the enclosure is provided for integrating automation components.



The standard coolant system is nearly 70% larger than earlier machine models at 208 l (55 gal), and designed for easy maintenance. It is equipped with quick-disconnect lines and level gauge, and removes from the front on casters. Other user friendly standard features include an integrated tray for parts/gages, standard tooling adapter, an electric foot pedal for setup and truing of mandrels, a mandrel runout indicator, and a universal honing fixture. Options include an ultra-precision collet spindle, coolant magnetic separator, automation electronics package, automatic size-control unit, cycle time control, long fixture support bars and more.



A true global platform, the SH-4000 complies with U.S. and European safety requirements.



For additional information on Sunnen honing systems, tools and abrasives, contact: Sunnen Products Company at sales@sunnen.com.



Sunnen Contact

Mr. Bob Davis

Global Communications Mgr.

Sunnen Products Company

Tel: 314.781.2100

bdavis@sunnen.com

Contact This Company

All Topics