Control/Phase ICs power DDR3 memory modules.
Share:
Press Release Summary:
Model IR3522 dual-output PWM controllers with I²C interface provide system control for DDR3 VDDQ and Vtt rails. They interface to any number of IR3506 phase ICs to drive as many phases as needed for powering unlimited number of memory modules. Efficiency is optimized via phase dropping feature and DirectFET® MOSFETs. Included phase ICs feature 7 V/2 A gate drivers, support lossless inductor current sensing, and include overcurrent protection during PSI assertion mode.
Original Press Release:
IR Introduces High Efficiency Solution to Power DDR3 Memory Modules
Phase Dropping Feature Combined with DirectFET® MOSFETs Delivers Best-in-class Efficiency Across the Load Range
EL SEGUNDO, Calif. - International Rectifier, IR® (NYSE: IRF), a world leader in power management technology, today introduced the IR3522 and IR3506 XPhase® chipset that provides a complete power solution for DDR3 multiphase memory applications.
The IR3522 dual output PWM controller with built-in I²C interface provides overall system control for both the DDR3 VDDQ and Vtt rails. The device interfaces with any number of IR3506 phase ICs to drive as many phases as needed to power any number of DDR3 dual in-line memory modules (DIMMS), simplifying layout, reducing board space, and overall system cost. The IR3522/IR3506 chipset enables accurate tracking with the additional flexibility of margining between the VDDQ and Vtt outputs through the I²C interface.
"The new Xphase solution for DDR3 applications delivers a power supply that is smaller, more flexible and easier to design while providing higher efficiency from light load to full load when compared to conventional approaches. The IR3522 combines the best of both worlds: precision of analog control combined with programmability of power management functions via I²C to implement a simple but smart memory power supply," said Omar Hassen, executive director, IR's Multiphase Products, Enterprise Power Business Unit.
The IR3522 allows output voltage programming capability for both VDDQ and Vtt outputs through the I²C compatible interface with a VDDQ set point error of only +/-0.5 %. The IR3506 provides both source and sink capability to enable more accurate tracking of the Vtt output to VDDQ. In addition the IR3506 supports a power savings function (PSI) to maximize efficiency at light loads.
IR3522 Features
The IR3522's I²C interface programs the Vtt tracking ratio ± 25 % and provides digital ON/OFF control. Four I²C addresses are selectable using 2 ADDR pins while four different VREF1 voltages are selectable using 2 VID pins if I²C communication is not available. Soft-stop turn-off to ensure VDDR and Vtt tracking is also featured in addition to a fault activated Crowbar pin to drive external NMOS devices for external output voltage protection. As with all Xphase ICs, the IR3522 features a comprehensive set of protection features including over-current, over-voltage, open remote sense, and open control.
IR3506 Features
The IR3506 phase IC features 7V/2A gate drivers (4A GATE L sink current) and supports loss-less inductor current sensing. The device also features a soft-stop turn-off to ensure VDDR and Vtt tracking. The IR3506 also offers over-current protection during PSI assertion mode operation, integrated boot-strap synchronous PFET, debugging function, self-calibration of PWM ramp, current sense amplifier, and current share amplifier and single-wire bidirectional average current sharing.
Specifications
Control IC
Part Number Package Set Point Accuracy VDD & Vtt tracking Fsw(per phase)
IR3522 32pin 5x5 MLPQ +/-0.5%(VDDQ) Yes 0.25 - 1.5MHz
Phase IC
Part Number Package Current Sense Method PSI Capability GateH Source/Sink GateL Source/Sink
IR3506 16pin 3x3 MLPQ Inductor DCR Yes 2A/2A 2A/4A
A reference design is available upon request. Contact tac@irf.com
Availability and Pricing
Pricing for the IR3522TRPBF begins at US $1.90 each in 10,000-unit quantities while pricing for the IR3506TRPBF begins at US $0.90 each in 10,000-unit quantities. Production orders are available immediately. Prices are subject to change.
About XPhase®
XPhase is IR's distributed multiphase architecture that consists of control ICs and phase ICs that communicate using a simple six-wire bus scheme. Phases can be added or removed without changing the fundamental design. The six-wire bus consists of a three-wire digital phase timing bus, an average current, an error amplifier output and a VID voltage. By eliminating point-to-point wiring between the control and the phase ICs, the six-wire bus shortens interconnections, and reduces parasitic inductance and noise. This simplifies PCB layout and provides a more robust design.
