USB/RS-232 Serial Adapter enhances Android device connectivity.
February 5, 2014 -
By using Android Open Accessory protocol to make Android device recognize onboard USB port as RS-232 port, ANDROID-232 lets users control legacy RS-232 devices directly from Android devices and vice-versa. This industrial- and military-grade, 2-way data port supports serial data rate up to 921.6 kbps (max of 115.2 kbps without flow control), and onboard circuitry provides power to charge Android device while connected. USB serial interface board is rated for -40 to +85°C operation.
|Original Press Release |
Acces I/O Products
10623 Roselle St.
San Diego, CA, 92121 1506
ACCES I/O Products Releases RS-232 Serial Adapter for Android Devices
ACCES I/O Products, Inc., a leader in cost-effective and easy-to-use serial communication and data acquisition products, is pleased to announce the release of a new USB serial interface board—the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB "slave" or "OTG" modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Serial data up to 921.6kbps is supported (a max of 115.2kbps without flow control). Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state.
This small industrial/military grade product features industrial temperature operation (-40°C to 85°C) ideal for outdoor applications, harsh industrial surroundings, or military use. Also, a hard line wired connection eliminates security concerns associated with Wi-Fi and other radio frequency solutions. A Type A industrial strength USB connector provides high-retention that complies with class 1, Div II minimum withdrawal requirements. The ANDROID-232 is feature-rich and allows for the connection of RS-232 serial devices—ideal for a variety of applications such as POS, gaming systems, retail, hospitality, automation, kiosks, defense industries, lighting, or any other application requiring the connection of RS-232 serial devices to an Android compatible system.
Available accessories include a broad range of cable assemblies and screw terminal boards for quick and easy connectivity. The ADAP9 accessory provides a screw terminal connection to break out the RS-232 signals on the DB9M connector for connections to non-standard RS-232 pinouts. Special order items such as conformal coating, custom software, and more, are also available.
Key features of the ANDROID-232 board include:
Android USB 2.0 Full-Speed Host to industry standard RS-232 DB9M serial port
Supports UART interface with RX, TX, RTS and CTS
RX buffer size 5512 bytes; TX buffer size 256 bytes
Supports baud rates up to 460.8kbps, 921.6kbps optional
Use with any Android platform supporting Android Open Accessory Mode (typically 3.1 or above)
±15kV ESD protection on USB data lines and all RS-232 signals
Status and fault LEDs including external power, charging status, and USB status
Supports USB charging for Android devices
Type A USB connector features industrial strength high retention design
Latching +5V external power input connector with external regulated power supply
Industrial operating temperature (-40°C to +85°C) standard
Factory Options include a RJ45 connector with Cisco pinout or a RJ12 connector
The ANDROID-232 product includes an Android sample program, with source, which operates within the Android Open Accessory protocol, available on all devices running Android 3.1 or higher (some 2.3.4 ROMs are supported). This program will allow you to verify proper operation of the ANDROID-232 device, including sending and receiving RS-232 data. A Python test program that can cooperate with the Android sample program to verify proper receipt of data as transmitted is also provided. In any operating system you can communicate through the ANDROID-232 using the standard communication terminal program of your choice; in Windows we provide, and highly recommend, a very powerful terminal program called "WinRISC". Windows samples in a variety of programming languages can be used to jumpstart your Serial COM programming (with full source code).
For additional information, readers can view a data sheet and manual for the ANDROID-232 by visiting the product webpage at www.accesio.com/android-232.
About ACCES I/O Products, Inc.
For over 23 years, ACCES I/O Products, Inc. has supplied an extensive range of analog, digital, serial communication, and isolated I/O boards and solutions. ACCES also offers complete systems, integration services and enclosures with a quick turn-around on custom projects including software. ACCES products are designed for use with PC/104, PCI, PCI Express, Pico-ITXe, Pico-I/O, ETX, USB, USB/104, USB/PICO, Ethernet and ISA, as well as distributed, wireless I/O, and computer-on-module (COM) form factors. All hardware comes with a 30-day, no-risk return policy and a three-year warranty. For further information, visit the company's web site at www.accesio.com.
Prices start at $139
Please inquire for OEM and volume pricing
Delivery: Stock to two weeks ARO
For Further Information, Contact:
Marketing Communications Director
ACCES I/O Products, Inc.
10623 Roselle Street, San Diego, CA 92121
Tel: 858.550.9559 FAX: 858.550.7322
ACCES—Acquisition Control Communication Engineering and Systems