Synchronization and Distribution Modules target military uses.
March 1, 2012 -
Supporting Pentek Virtex-6 Cobalt® and Pentek Virtex-7 Onyx(TM) modules at clock rates up to 1.8 GHz and sample rates to 3.6 GHz, Model 7192 PMC/XMC module and 19 in. rackmount Model 9192 enable synchronous sampling and timing for multichannel data acquisition, DSP, and software radio applications. Model 7192 can synchronize up to 4 modules, each receiving common clock with timing signals for synchronizing, triggering, and gating functions, while Model 9192 supports up to 12 modules.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
|Original Press release |
1 Park Way
Upper Saddle River, NJ, 07458
Pentek Introduces High-Speed System Synchronization and Distribution Modules for Military, Medical Imaging and Beamforming Applications
Pentek, Inc., today introduced two high-speed system synchronization and distribution products: the Model 7192 PMC/XMC module and the Model 9192 rack-mount unit. These high speed synchronizers are designed to support multiple Pentek Virtex-6 Cobalt® and Pentek Virtex-7 Onyx(TM) modules at clock rates up to 1.8 GHz and sample rates to 3.6 GHz.
Synchronization is important in multichannel applications like phased array radar, diversity receivers, and direction finding and beamforming antennas. These applications abound in military systems, but the same concepts are also used in medical imaging and industrial inspection systems where beamforming improves the image resolution.
"At these very high sample rates, synchronous sampling, gating and triggering is a real challenge for system integrators," said Rodger Hosking, vice president of Pentek. "With the CML (Current Mode Logic) signaling over our convenient micro HDMI connectors, we can offer our customers pre-configured and validated FPGA system architectures capable of operating at the highest speeds in the industry."
The Model 7192 is a PMC/XMC board that can synchronize up to four Cobalt modules, each receiving a common clock along with timing signals that can be used for synchronizing, triggering and gating functions. The Model 9192 is packaged in a 19" 1U rack-mount unit supporting up to twelve modules. The Model 7192 and 9192 enable synchronous sampling and timing for a wide range of multichannel high-speed data acquisition, DSP and software radio applications. Both products are compatible with any combination of Pentek's Model 71670 Quad 1.25 GHz D/A boards, Model 71630 1 GHz A/D and D/A boards, and Model 71640 3.6 GHz A/D boards. The modules are available in PMC/XMC, PCI, VPX, cPCI and rugged form factors supporting a range of environments from the lab to deployment.
Supporting Features and Products
The 7192 and 9192 clock and sync generators can accept a user supplied external clock or use the on-board programmable voltage controlled crystal oscillator (VCXO) as the clock source. The VCXO can operate alone or can be locked to a system reference clock signal.
These products allow programming of operation parameters including, VCXO frequency, clock dividers and delays that allow the user to make timing adjustments on the gate and sync signals before they are sent to buffers for output through the uSync connectors.
Pentek's ReadyFlow board support packages include functions for initialization and control of sample and reference clocks and clock routing, as well as example code for multiboard synchronization. ReadyFlow board support packages are available for Windows, Linux and VxWorks operating systems. Support for the Models 7192 and 9192 is included in the 71630, 71640 and 71670 ReadyFlow board support packages.
Form Factors, Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at firstname.lastname@example.org.
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
Pentek, Cobalt, Onyx and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=162
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email email@example.com; Website www.pentek.com.
International Sales Contacts: Elexo in France at (33) 0141 22 1023, Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969,MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.