Rotary Position Sensor offers low-profile, noncontact design.
April 6, 2010 -
Model NRH280DP dual-output, hall effect sensor features 6.5 mm profile and supports air gap of 2-7 mm, which allows use in high shock and vibration environments. Operating in temperatures from -40 to +140°C, it supports parameters such as measurement range, and clockwise/counterclockwise direction output. Each channel can be programmed with any one of 341 angles, in 1° increments. Sensor operates from 5 Vdc regulated or 9-30 Vdc unregulated supply and has overvoltage protection to 40 Vdc.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
|Original Press release |
Penny & Giles
12701 Schabarum Ave.
Irwindale, CA, 91706
Penny + Giles' New Low-Profile, Dual Output Rotary Position Sensor Extends Reliability/Accuracy with "No Contact" Hall-Effect Technology
CHRISTCHURCH, UK - Penny + Giles, a business group of Curtiss-Wright Controls and a designer and manufacturer of high precision sensing technology, has introduced the NRH280DP, a new dual output 'no contact' rotary position sensor. The NRH280DP uses proven, non-contact programmable Hall-effect technology to provide OEMs with highly reliable and accurate rotary measurement in extreme industrial and off-highway environments. This low-profile sensor, with a 6.5mm profile, one of the thinnest available, provides numerous programmable options.
Designed for operation in extreme temperatures, the NRH280DP enables system designers to quickly and easily improve the safety and integrity of their control systems. The rugged NRH280DP is ideal for use in arduous operating environments and is currently used in diverse applications including articulated dump trucks (tip control), garbage collection vehicles (bin lift control), road sweeping vehicles (4-wheel steering), and Formula 1 racing cars (throttle pedal position).
Penny + Giles' configurable NRH280DP provides OEMs with a wide selection of parameter options including measurement range, and clockwise or anticlockwise direction output. This flexibility provides OEMs with a greater amount of control to configure the sensor to best suit their needs and achieve maximum performance. For example, the sensor can be configured so that one signal can be used in a control function while the other is used for position monitoring or display purposes.
NRH280DP Performance Features:
o Dual outputs
o "No Contact" Hall-effect technology
o Supports air gap between 2-7mm
o Low-profile: 6.5mm profile
o Power requirements: 5Vdc regulated or 9-30Vdc unregulated power supply
o Over-voltage protection to 40Vdc
o User programmable with 341 different angles (0-20 to 0-360 degrees: in one degree increments)
o 12-bit resolution (0.025%) over selected angular range
o Analog (0.5 to 4.5Vdc) or digital (Pulse Width Modulated) signal outputs
o Factory programmable to 0.1 to 4.9Vdc output range
o Electromagnetic immunity to 100V/m (<1mV maximum output signal)
o ±0.4% non-linearity
o Operating temperature range: -40 to +140ºC @ 5Vdc (< ±30ppm/ºC stability)
Unlike conventional captive shaft rotary position sensors, the NRH280DP has a separate magnet assembly that activates the fully encapsulated Hall-effect sensor with a permissible air gap of between 2 and 7mm. This allows the sensor to be used in extreme environments that are subjected to high shock and vibration, or can endure high-pressure wash-downs (IP69K protected).
The sensor's slim, low-profile housing, measuring only 6.5mm, is one of the thinnest available in the industry. Its transmissive properties between the magnet and sensor enable operation through non-magnetic materials, such as gearbox castings. The NRH280DP can operate from either a 5Vdc regulated or 9-30Vdc unregulated power supply and has over-voltage protection to 40Vdc. Each of its dual output channels can be supplied programmed with any one of 341 different angles in the range 0-20 to 0-360 degrees, in one degree increments, and features a 12-bit resolution (0.025%) over the selected angular range.
To ease configuration, NRH280DP is available with analog (0.5 to 4.5Vdc) or digital (Pulse Width Modulated) signal outputs as standard, but can also be factory programmed to offer 0.1 to 4.9Vdc output range, matching the equivalent signals from a potentiometer. Its two outputs can be used for error checking if they are set up to be opposed (clockwise on the first signal and anticlockwise on the second signal) and the output summed.
NRH280DP features electromagnetic immunity to 100V/m and it has a very low maximum output signal noise of less than 1mV. This means that no additional signal filtering is required on the output signal. It also has a class-leading non-linearity of ±0.4%. When powered with 5Vdc, the NRH280DP has an operating temperature range from -40 to +140°C, with a stability of less than ±30ppm/°C, and can also withstand temperatures up to +170°C for 72 hours.
Business Development Manager - Industrial
Penny + Giles Controls Ltd., 15 Airfield Road, Christchurch, Dorset, BH23 3TG, United Kingdom
Tel: +44 (0) 1202 409409 | Fax: +44 (0) 1202 409475
A Curtiss-Wright Company
Registered Office: 1 Airfield Road, Christchurch, Dorset, BH23 3TH, United Kingdom
Registered in England No. 843903 VAT Registration No. 682 4436 21