Radio Modems operate on European 433 MHz ISM band.
August 13, 2010 -
Acting as transparent serial cable to attached host, TXL2/RXL2 Modules provide preamble, synchronization, bit balancing, and error checking along with automatic noise squelching. Simplex, multi-channel OEM radio modems feature baud rate of 9,600 bps, transmit power of +10 dBm at 10 mW, and receiver sensitivity of -107 dBm for 1% BER. For multiple radio systems, TXL2/RXL2 can be set to 1 of 8 unique addresses and allow operation on 1 of 5 pre-set frequencies in 433 MHz band.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Radiometrix Ltd.
Hartcran House
Watford Hertfordsh, , WD19 5EZ
United Kingdom
UHF Multi Channel Transparent Data Link TX/RX
The TXL2 and RXL2 modules are 9600baud simplex multi channel OEM radio modems in a Radiometrix SIL standard footprint, operating on European 433MHz ISM band. The TXL2/RXL2 pair act as a transparent serial cable to attached host. Unlike raw FM radio modules (e.g. TX2A/RX2A), TXL2/RXL2 will take care of preamble, synchronisation, bit balancing and error checking along with automatic noise squelching.
The TXL2/RXL2 pair provides a one-way radio link. Provided no two devices attempt to transmit simultaneously no further restrictions on data transmission need be made, as all transmit timing, valid data identification and datastream buffering is conducted by the units. Synchronisation and framing words in the packet prevent the receiver outputting garbage in the absence of wanted RF signal or presence of interference. For multiple radio systems a TXL2/RXL2 can be set to 1 of 8 unique addresses. As well as having unique addresses, the TXL2/RXL2 allow operation on one of 5 pre-set frequencies in the 433MHz band. These frequencies are non-overlapping and simultaneous operation of TXL2/RXL2 pairs in the same area on different channels will be possible. Units are supplied on 433.925MHz (Ch0) as default.
Features
o Conforms to EN 300 220-3 and EN 301 489-3
o High quality, stable crystal reference
o Low noise synthesiser / VCO
o SAW front-end filter
o Multi-stage ceramic IF filtering
o Single conversion superhet
o Serial modem baud rate at 9600bps (simplex)
o Addressable point-to-point
o 5 serial select wideband channels
Applications
o Handheld / portable terminals
o PDAs, organisers & laptops
o Industrial telemetry and telecommand
o In-building environmental monitoring and control
o Remote data acquisition system, data logging
o Fleet management, vehicle data acquisition
Technical Summary
o Operating frequency: 433.925MHz (default)
o Modulation: 16kbps bi-phase FSK
o Supply: 5V at 28mA transmit, 22mA receive/idle
o Transmit power: +10dBm (10mW)
o Receiver sensitivity: -107dBm (for 1% BER)
o 32 byte data buffer
o Adjacent channel rejection: 60db @ ±320kHz
o Spurious emission: <-65dBm
o Receiver Blocking: >75dB
|
|
|
|
|
|
|
|
