RF/IF Signal Recorders capture signal bandwidths to 200 MHz.
February 21, 2013 -
Configured in 4U 19 in. rack-mountable chassis, Models RTR 2707 and RTR 2747 offer recording and playback of RF/IF signals up to 700 MHz with signal bandwidths to 200 MHz. Systems feature 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/A. Model RTS 2707 has up to 20 hot-swappable magnetic hard drives for up to 20 TB of data storage, while Model RTR 2747 provides up to 24 hot-swap SSDs with combined capacity to 11.5 TB. Both include front panel USB ports and I/O connectors on rear panel.
|Original Press release |
1 Park Way
Upper Saddle River, NJ, 07458
Increased Performance in RF/IF Signal Recorders
Increased Performance in RF/IF Signal Recorders Delivers Wider Band Signals with Better Accuracy for SIGINT, Radar and Communications Systems
Rackmount and rugged rackmount recording systems
Captures signal bandwidths up to 200 MHz
Sustained 4 GB/s data streaming with SSD option
Up to four channels of recording to NTFS RAID
SystemFlow GUI control panel for fast, intuitive operation
Remote system control and custom integration using SystemFlow API
UPPER SADDLE RIVER, NJ – Pentek, Inc. today announced rackmount additions to its Talon® RF/IF signal recording and playback systems. The Model RTS 2707 rackmount system, and Model RTR 2747 rugged rackmount system, offer recording and playback of RF/IF signals up to 700 MHz with signal bandwidths up to 200 MHz. The systems feature 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and an 800 MHz 16-bit D/A. Pentek’s SystemFlow® software allows turnkey operation through a graphical user interface (GUI), while the SystemFlow application programming interface (API) allows easy integration of the recording software into custom applications.
The RTS 2707 is configured in a 4U 19" rack-mountable chassis with up to 20 hot-swappable magnetic hard drives for up to 20 terabytes of real-time data storage space, front panel USB ports and I/O connectors on the rear panel. The RTS 2707 is best suited for commercial applications requiring high-data storage capability.
The RTR 2747 is configured in a rugged 4U 19" rack-mountable chassis, with up to 24 hot-swap solid state drives (SSDs) with combined capacity to 11.5 TB, front panel USB ports and I/O connectors on the rear panel. The fast read/write speeds of the SSDs allow the RTR 2747 to sustain 4 GB/s recording rates across the full storage capacity. Because SSDs operate reliably under conditions of shock and vibration, the RTR 2747 performs well in ground, shipborne and airborne environments. The drives can be easily removed or exchanged during or after a mission to retrieve recorded data.
“These systems are intended to digitize the growing class of wideband signals and stream the data to disk in real time,” said Rodger Hosking, vice president of Pentek. “Because this technology is moving so fast, our greatest value is in maximizing performance and wrapping it into robust and flexible solutions. These systems are truly best in class from all aspects.”
Recording System Selections
The RTS 2707 and RTR 2747 are scalable to accommodate multiple chassis to increase channel counts and aggregate data rates. All recorder chassis are connected via Ethernet and can be controlled from a single GUI either locally or from a remote PC. Multiple RAID levels, including 0, 1, 5, 6, 10 and 50, provide a choice for the required level of redundancy. Optional GPS time and position stamping allows the user to record this critical signal information.
A/D sampling rates, DDC decimations and bandwidths, D/A sampling rates, and DUC interpolations are among the selectable system parameters that provide a fully programmable system capable of recording and reproducing a wide range of signals.
Available I/O in both models includes audio and VGA video, RS-232/422/485 serial, multiple USB 2.0, multiple USB 3.0, and dual Gigabit Ethernet connections.
Ease of Operation
The built-in Windows 7 Professional workstation with an Intel Core i7 processor gives the user total flexibility in routing data to various drives, networks and I/O channels. Also, the user can install post-processing and analysis tools on the system to operate on the recorded data. The RTS 2707 and RTR 2747 are fully supported with Pentek’s SystemFlow software for system control and turn-key operation. The software provides a graphical user interface with point-and-click configuration management and can store custom configurations for single-click setup. The software also includes a virtual oscilloscope and signal analyzer to monitor signals before, during and after data collection.
Pricing and Availability
The RTS 2707 and RTR 2747 start at $39,995 and $49,995 USD, respectively. Delivery is 8-10 weeks ARO.
Pentek, an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.
Pentek, Talon and SystemFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=174
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email firstname.lastname@example.org; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.