Orifice Plate Flowmeter features one-piece design.March 20, 2009 -
Supplied factory configured and pressure tested, OriMaster Orifice DP Flowmeter is suitable for clean liquids, gases, and steam applications in line sizes from 1-8 in. and at pressures up to 1,450 psi. Unit combines all major components needed for orifice plate installation in one assembly, eliminating need to source and install separate manifold, transmitter, and impulse piping. OriMaster V provides volumetric readings, while OriMaster M offers mass flow readings.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
ABB Inc.
Instrumentation Business Unit, 125 E. County Line Rd.
Warminster, PA, 18972
USA
New Flowmeter from ABB Instrumentation
New ABB orifice flowmeter can cut installation costs by 50%
WARMINSTER, PA, March 16, 2009--ABB Instrumentation has cut the cost of installing orifice-plate flowmeters by up to half with the launch of its OriMaster compact orifice DP flowmeter. The latest in ABB's new FlowMaster range, the OriMaster is a one-piece flowmeter that comes fully factory configured and pressure tested, solving many of the problems associated with sizing, selection, installation and operation of conventional orifice plate installations.
Suitable for clean liquids, gases and steam applications in line sizes from 1 to 8 inches (DN25 to DN200) and at pressures up to 1450 psi (100 bar), the OriMaster combines all the major components needed for an orifice plate installation in one assembly. This eliminates the need for users to source and install a separate manifold, transmitter and impulse piping, typically cutting the cost of installation and commissioning by up to 50%.
Recent fugitive emission legislation has placed additional responsibilities on users to minimize leakage from their processes. OriMaster's design greatly assists operators to comply. Featuring an integrated ABB DP transmitter and manifold design, OriMaster offers a number of key benefits. Its short integral impulse paths simplify installation, and by eliminating up to 80% of the potential leak points, greatly reduces both fugitive emissions (at threaded connections and compression fittings) and also the metering errors caused by such leakage.
The OriMaster's all-in-one design also offers enhanced accuracy and a faster speed of response, with no problems caused by issues such as long or blocked impulse lines, or impaired signals due to condensation in gas system impulse lines or gas bubbles in liquid lines.
Installing the OriMaster is simplified by its wafer design orifice carrier assembly, enabling it to be fitted into an existing space between standard pipe flanges with minimal disruption to the surrounding pipework. This makes it ideal for Maintenance, Repair and Overhaul (MRO) applications, by enabling fast and simple replacement with no cutting or welding required.
Incorrect centralization of orifice devices can cause additional metering errors of 3%. To eliminate such errors, every OriMaster comes complete with a centering tool, ensuring that the meter is correctly positioned in the pipeline within common flange specifications.
ABB offers two orifice bores for each pipe size, simplifying the selection process. The flowmeter comes in two versions: one for volumetric readings (OriMaster V) and the other for mass flow (OriMaster M).
OriMaster V suits general purpose volume measurement, featuring a stainless steel transmitter housing and meter body. It provides an optional flow rate and total display as well as an analog output.
OriMaster M provides measurements directly in mass or corrected volume units. It uses ABB's 267CS multivariable transmitter to measure differential pressure, temperature and pressure, and provides an optional display and analog output. In addition to its stainless steel 316L body and alloy transmitter case, (which is optionally available in 316 stainless steel), ABB can supply OriMaster M supplied complete with an optional PT100 temperature sensing assembly mounted within the flow sensor, offering both simplified and more cost-effective installation.
Both the OriMaster V and OriMaster M have HART communications. OriMaster M has the additional options of Profibus PA, Foundation Fieldbus or Modbus communications. To further simplify the selection process, ABB supplies a free online sizing, selection and coding software tool to help users quickly turn their application into the best configuration of OriMaster for their needs.
ABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 115,000 people.
For more information please contact:
ABB Instrumentation
Rob Mapleston
Tel: 1-215-674-6580 or 1-800-829-6001
robert.mapleston@us.abb.com
www.abb.com/instrumentation
|
|
|
|
|
|
|
| 
