Multiport T1 E1 Repeater increases signal range and number.
September 2, 2011 -
Capable of operating in Terminate, Bridge, and Monitor modes, T1 E1 Single or Dual Multiport Repeaters generate multiple identical outputs for each input. Single bantam version provides 10 identical outputs from one T1 E1 input, while single RJ45 version provides 12 identical outputs. Also available, dual version provides 4 outputs for each of 2 inputs. Units operate on 7-12 Vdc, draw up to 1,000 mA, and permit output drive for line lengths up to 655 ft.
Original Press release
GL Communications Inc.
207A Perry Pkwy., Suite 1
Gaithersburg, MD, 20877
USA
T1 E1 Single or Dual Multiport Repeater
Gaithersburg, Maryland, USA - GL Communications Inc. announced today the availability of T1 E1 Single or Dual Multiport Repeaters. Addressing a press conference, Mr. Vijay Kulkarni CEO of the company said, "T1 E1 Multiport Repeaters are used to generate multiple identical T1 E1 outputs for each T1 E1 input, thus increasing the range and number of T1 E1 signals."
He added, "A Single or Dual T1 E1 Multiport Repeater can be used for the following purposes:
To generate multiple identical T1 E1 outputs for each T1 E1 input
To test and load a DUT with multiple T1 E1 interfaces simultaneously
For broadcast applications and traffic generation and simulation
To preserve the strength of the signal and extend the distance over which the signal is transmitted with less degradation
Mr. Vijay Kulkarni further added, "The single bantam version provides ten identical outputs from a single T1 E1 input. The single RJ45 version provides twelve identical outputs from a single T1 E1 input. And the dual version provides four outputs for each of the two inputs."
Important Features of T1 E1 Single and Dual Multiport Repeaters:
The input and output connections are through standard bantam or RJ 45 jacks
Inputs and outputs are compatible with CCITT G.703
Units operate on a voltage of 7-12 V DC and draw a current of up to 1000 mA
T1 and E1 signals are terminated at 100 Ohms or 120 Ohms respectively
The repeater permits output drive for line lengths up to 655 feet
The T1 Multiport Repeaters and E1 Multiport Repeaters are available as separate units
LEDs are provided to indicate the presence or absence of input signals and power
The units provide Terminate, Bridge, and Monitor modes of operation
About GL Communications Inc.,
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.
GL's TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.
GL's VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.
GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) are all available.
GL's Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.
GL's Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL's compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.
GL's wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.
GL's Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.
GL's Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.
For more information about GL's complete line of products,
Contact:
Shelley Sharma
Phone: 301-670-4784 ext. 114
E-mail: info@gl.com
|
|
|
|
|
|
|
| 
