Multi-Gage System is modular and reconfigurable.
Press Release Summary:
Designed to meet ID, OD, and length measurement needs of manufacturing environments where short runs and quick changeovers are required, Standard Elements comprise modular-based gaging system with standard components. This enables users to configure and implement simple to complex gaging solutions. Products available with or without integrated pneumatic probe retraction, spring blade or ball guidance, and measurement strokes up to ±2.5 at ±10 mm accuracy to 0.5 µm.
Original Press Release:
Mahr Federal Introduces Standard Elements, a Modular Multi-Gage System
-- Configure and implement simple to complex gaging solutions quickly and cost effectively
-- Reusable components provide measurement accuracy, flexibility and versatility for short run, quick changeover production
PROVIDENCE, RI – Mahr Federal has introduced Standard Elements, a new modular-based gaging system with standard components that allow users to configure and implement simple to complex gaging solutions quickly and cost effectively. They provide the flexibility and versatility of a general gage, yet can also combine to provide the speed and accuracy of a custom or dedicated gaging solution. The system is designed to meet the ID, OD, and length measurement needs of today's manufacturing environment where short runs and quick changeovers are becoming the rule.
"These systems are not expected to replace traditional gages," said George Schuetz, Mahr Federal Director of Precision Gages, "but to add another dimension to the gaging paradigm. The idea of the multi-gage is to turn all the elements found in high precision comparative gaging into modular components. These elements include good solid reference anvils or contacts, a sensitive contact, part references (or backstops), and a readout, all tied together with a robust frame for stability."
The use of these Standard Elements allows multi-gage measuring devices to be designed and assembled for the widest possible range of workpieces. And since they are constructed of all common elements, they can easily be re-configured for similar or different applications. "So where a traditional comparative gage may have been built for one size shaft with five diameters," said Schuetz, "a new multi-gage can easily be adjusted for five different shafts having different diameters at different locations."
Just as there are different levels of performance and robustness in the design of standard handheld comparative gaging, Mahr Modular Multi-Gage components employ a similar "good, better, best" design philosophy. Multi-gage elements can be configured for the simplest parts or even the most complex and demanding workpiece geometries. And because the modular components are all designed to be as small as possible, a high number of measuring points can be inspected within a small area of the workpiece. All multi-gage systems can be constructed by the customer from standard catalog elements and then, if needed, changed later by the end user.
Mahr Modular Multi-Gage configurations are robust enough to withstand demanding shop floor environments, and offer a number of economic benefits as well. Once manufacture of a particular type of workpiece has ceased, elements used in the test equipment can be reused for a different type of workpiece. A choice of different readout systems can be used, as well as different mechanisms for guiding the moving part of the stylus, according to the accuracy requirements of the measuring task. This flexibility reduces both development and implementation time.
When the performance of electronic gaging is required, Mahr Modular Multi-Gage systems offer the same flexibility in selecting input and computation options. These include creating multiple inputs from different sensors (LVDTs, digital probes, analog or air sensors) and the use of gaging computers with gaging software for multiple part programs, part classification, and data storage and analysis.
Mahr Standard Elements are available with or without integrated pneumatic probe retraction, spring blade or ball guidance, measurement strokes up to ±2.5 at ±10 mm accuracy to 0.5 µm. Download the full Millimar Modular Measurement Catalog for complete Multi-Gage standard element details.
Mahr Federal Inc., a member of the Mahr Group, has been providing dimensional measurement solutions to fit customer application needs for over 150 years. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal's calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0 (see our Scope of Accreditation for accredited calibration processes). For more information visit http://www.mahr.com
For additional information, contact:
Marketing
Mahr Federal Inc.
1144 Eddy Street
Providence RI 02905 USA
Tel: (800) 343-2050 or (401) 784-3100
Fax: (401) 784-3246
Email: information@mahr.com
Web site: http://www.mahr.com
