ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

Multi-Axis Motion System provides ready-to-run solution.

Print | 
Email |  Comment   Share  
February 15, 2013 - Controlling up to 4 DC brushed, brushless, or step motors, iPOS360x SX accelerates and facilitates design of custom systems for complex motion control applications. Solution lets users plug in up to 4 iPOS3602 VX or iPOS3604 VX intelligent drives and provides all necessary connectors. Each drive has built-in motion controller, provides PLC features, and can operate as standard CiA402 CANopen slave drive or can be programmed to execute complex motion programs directly at drive level using TML.

iPOS360x SX Multi-Axis Motion System, a Ready-to-Run Solution to Compact Multi-Axis Systems!

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

Technosoft S.A.
Rue des Courtils 8a

Press release date: February 7, 2013

Complex motion control applications often require the design of custom systems. This process is usually expensive and time consuming for the project developers. The new Technosoft multi-axis motion system – iPOS360x SX – makes this phase faster and easier, giving the designer an extremely  compact (100 x 98 x 37 mm) ready-to-run solution based on the new family of Technosoft iPOS drives.

iPOS360x SX allows you to plug in up to four iPOS3602 VX or iPOS3604 VX intelligent drives and provides all the necessary connectors (motor, encoder feedback and I/O signal) for each drive. The drives are connected through a CAN-bus link. Two CAN-bus connectors plus an optionally connectable terminal resistor ensure a rapid connection to any CAN-bus network configuration. An RS-232 link offers easy access to all drives, for setup and testing, using a standard PC. Future developments of the iPOS360x SX will include an Ethernet port and an Ethernet-to-CAN adapter, while a DIN rail mounting and a metallic cover are available as options.

Using iPOS drives, the iPOS360x SX multi-axis motion system offers a cost-effective solution for controlling up to four DC brushed, (rotary or linear) brushless, or step motors (4 x 144 W, 4 x 36 V). Each iPOS360x drive has a built-in motion controller and provides PLC features. Each can operate as a standard CiA402 CANopen slave drive or can be programmed to execute complex motion programs directly at drive level, using the high level Technosoft Motion Language (TML). The TML language programming allows each drive to execute complex motion sequences including setting of various motion modes, I/O signals handling, arithmetic and logic operations, conditional jumps and calls or data transfers between axes. iPOS360x SX will enable you to implement a multi-axis system by configuring any drive as master: the application master drive will call each axis to execute and confirm complex TML functions. The slave drives may also be programmed to periodically send information messages to the master drive, so the latter can monitor each task’s progress. If the master is at PC or PLC level, the iPOS360x drives operate as intelligent slaves in a similar manner as above, while executing their TML program stored in the local non-volatile memory.

Technosoft is a leading DSP Motion Control technology expert company, specialized in the design and manufacture of high-performance motion control products and custom motions systems.

Product specifications can be found at:

Avenue des Alpes 20
Tel.: +41 (0)32 732 55 00
Fax: +41 (0)32 732 55 04
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
Controls and Controllers
 More New Product News from this company:
Intelligent Panel Mount Drive features EtherCAT interface.
Intelligent Motor Drive includes EtherCAT interface.
Compact Intelligent Drives are equipped with CAN interfaces.
Intelligent Servo Drive operates stand-alone or as slave.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Technosoft Drives Bring Intelligence to CANopen Networks
Distributed Motion Control with Technosoft Universal Drive Solution
More ....
 Tools for you
Watch Company 
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Motion Controls
Integrated Motion Controls
Motion Controllers
Join the forum discussion at:
Tools of the Trade

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address