Mobile Work Platform suits indoor construction projects.September 19, 2008 -
Combining scissor lift capability and compact size, GRC-12 Runabout(TM) Contractor measures 4 ft 5.75 in. long x 2 ft 5.5 in. wide and is engineered with steel platform and rails. Telescoping mast, encased in steel for protection against worksite debris, enables up to 2 operators to work at heights up to 18 ft. Unit may be driven when fully elevated, has lift capacity of 500 lb, and offers zero inside turning radius. Slide-out extension deck offers extra 17.5 in. of outreach.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Genie, a Terex Company
18465 NE 68th St.
Redmond, WA, 98052
USA
New Genie® GRC-12 Runabout(TM) Contractor Is Designed to Handle Demanding Indoor Construction Projects
REDMOND, WASH. (September 17, 2008) - The new Genie® GRC-12 Runabout(TM) Contractor is designed to be durable and productive on indoor construction sites where contractors are installing and repairing drywall, electrical, HVAC and more. The new GRC-12 offers contractors a 2-person occupancy workspace with a narrow profile to get more done in a small amount of space. This new unit is engineered with a steel platform and rails, and the telescoping mast is encased in steel, giving it additional protection against worksite debris.
"The GRC-12 is perfect to use on worksites where contractors need the capability of a scissor lift with the compact size of a Runabout," said Kim Williams, senior market analyst, Genie Industries. "Its design is modeled after our proven GR(TM)-12 Runabout - lightweight and compact to easily fit in a freight elevator and use in space-restrictive areas. The features incorporated into the design of the GRC-12 make this machine ideal to use in low-floor load situations and high-rise construction projects."
The steel platform on the GRC-12 comes standard with a slide-out extension deck that gives operators an extra 17.5 in of outreach. With a lift capacity of 500 lb and the slide-out extension deck, up to two operators on the GRC-12 can work to a height of 18 ft. This unit also boasts a narrow 2 ft 5.5 in width by 4 ft 5.75 in length profile, allowing the unit to fit in most passenger elevators and to be driven through doorways with an operator onboard. The GRC-12 is also driveable when fully elevated for increased productivity. And, the zero inside turning radius on the GRC-12 allows for quick maneuverability in congested work spaces.
Engineered specifically to withstand the rigors of working on undeveloped indoor worksites, the telescoping mast on the new GRC-12 is protected by a steel tube and end cap. Also as a safeguard against worksite damage, the covers on the GRC-12 are made from ABS, a thermoplastic material that provides increased flexibility while retaining its original shape.
Uptime is increased on the easy-to-service GRC-12. This unit is engineered with a quick disconnect platform for ease of repair or replacement. And, the mast hydraulic cylinder, located just under the cap, can quickly be unbolted and pulled out for efficient servicing. Key components on the GRC-12 are easily accessible through the access doors on the base, allowing for quick trouble-shooting and regular maintenance checks. Genie customers will find this unit easy to keep rental-ready because the GRC-12 is engineered with common components.
The GRC-12 is designed with the operator in mind. Operators will appreciate the two tool trays, one on each side of the mast, that come standard on the GRC-12, which puts everything operators need within an arm's reach. Also, the ground-level entry on the GRC-12 offers a 15.5-in step-in height, the lowest in the industry.
About Genie
Headquartered in Redmond, Wash., with branch offices worldwide, Genie Industries manufactures material lifts, aerial work platforms, trailer-mounted booms and light towers, scissor lifts, self-propelled telescopic and articulating booms and telehandlers. For more information, please visit www.genieindustries.com.
Genie Industries, Inc. is a subsidiary of Terex Corporation (NYSE: TEX), a diversified global manufacturer based in Westport, Conn. For more information on Terex, please visit www.terex.com.
Public Relations Contact: Robyn Wherritt
Phone: 425-497-6851, FAX: 425-556-6535
Email: robyn.wherritt@terex.com
|
|
|
|
|
|
|
| 
