Industrial Radios are available in 900 MHz/2.4 GHz models.
August 7, 2008 -
Model RLX-IFH9S 900 MHz and RLX-IFH24S 2.4 GHz Industrial Frequency Hopping serial radios utilize signal that hops from channel-to-channel, allowing wireless network to avoid interference or existing networks. They can communicate with Modbus, DF1, ASCII, or any other serial devices and support RF data rates up to 230 Kbps. Featuring 128-bit AES encryption and 1 W transmit power, scalable radios are protected by rugged industrial-grade Class I Div 2 enclosure.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
ProSoft Technology Inc.
9801 Camino Media, Suite 105
Bakersfield, CA, 93311
USA
ProSoft Technology's New 900 MHz and 2.4 GHz Industrial Frequency Hopping Serial Radios
The RLX-IFHS radios provide a secure, powerful, rugged and flexible solution for a variety of network environments
BAKERSFIELD, Calif., July 4, 2008
ProSoft Technology's new Industrial Frequency Hopping serial radios are license-free and are available in both the 900 MHz (RLX-IFH9S) and 2.4 GHz (RLX-IFH24S) bands. Frequency hopping radios use a proprietary signal that hops from channel to channel, which provides the wireless network with an extra layer of security allowing it to avoid interference or existing wireless networks.
Applications
ProSoft Technology's 900 MHz radios are ideal for long range SCADA applications, or applications with challenging paths including penetration of foliage and walls. The 2.4 GHz options use an international unlicensed frequency and can be used when 900 MHz is not permitted.
The RLX-IFH serial radios can communicate with Modbus, DF1, ASCII, or any other serial devices. They support RF data rates from 230 kbps to 19.2 kbps for difficult RF paths with best-in-class radio receiver performance (-116 dBm).
Industrial Frequency Hopping Features
All RLX-IFH radios are scalable and offer an unmatched, rich set of features, such as 128 bit AES encryption, a full 1 watt of transmit power, programmable frequencies and data rates, and a rugged industrial grade Class I Div 2 rated enclosure. For configuration and advanced network-wide diagnostics, the radios use ControlScape Configuration and Diagnostic Software. The software allows users to measure and monitor variables such as signal strength, data bytes transmitted, and the number of connections on the network.
The RLX-IFH radios support distances up to 15 miles for the 2.4 GHz band and 30 miles for the 900 MHz band if they operate with a point-to-point connection, high gain directional antennas, and clear line of site.
All RadioLinx® products are license free and UL 1604 / ISA 12.12.01 Class I, Division 2 approved for hazardous environments. Each radio comes with a three year warranty and unlimited technical support.
For information about RadioLinx products, call +1-661-716-5100, email prosoft@prosoft-technology.com or visit www.prosoft-technology.com.
|
|
|
|
|
|
|
| 
