Heating Elements are designed for various furnace atmospheres.
November 7, 2002 - Designed for use at very high temperatures, Super elements work directly in furnace atmosphere without protective muffles. Five grades are available. Elements are suitable for nitrogen, hydrogen, vacuum, and mixtures of endogas, and reducing furnace atmospheres. Ready-made elements can be used in production and laboratory furnaces in glass, steel, electronics, ceramics, and heat treatment industries.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Kanthal Corp.
119 Wooster St.
Bethel, CT, 06801-1837
USA
Kanthal Launches New Range of Customised Heating Elements
In a further development of its concept of producing customised, furnace heating systems for specific and demanding applications, Kanthal AB has launched five new grades of Kanthal Super heating elements.
The company recently launched several new products in its Superthal range of heating modules.
Designed for use at very high temperatures, the key feature of the new Kanthal Super elements is that they work directly in the furnace atmosphere without muffles to protect them. No other heating element currently available has the same capability. Suitable for nitrogen, hydrogen, vacuum and mixtures of endogas and reducing furnace atmospheres, Kanthal Super elements are ready-made for use in production and laboratory furnaces in the glass, steel, electronics, ceramics and heat treatment industries.
One new element, Kanthal Super ER offers the benefit of working in a range of different furnace atmospheres. It is now possible, therefore, in one furnace, to operate firing cycles where the atmosphere condition can be altered, during the cycle, between oxidising, inert, endogas and reducing atmospheres. Suitable for
temperatures up to 1600°C, Kanthal Super ER elements are equally suitable for oxidising processes. Another benefit is that they can be replaced, if necessary, whilst the furnace is hot, minimising downtime. The main applications are seen as most types of sintering furnaces working in reducing atmospheres such as dry hydrogen, nitrogen and endogas.
Kanthal Super RA has been designed specially to work in nitrogen atmospheres at temperatures above 1250°C and to minimise the problems of element scaling caused by nitration. At temperatures above 1250°C in nitrogen atmospheres, the protective 'glaze' on elements is consumed, sometimes causing silicon nitride to
be formed, leading to scaling. Kanthal Super RA withstands nitration at high temperature better than any other existing Kanthal Super element. Main applications are in different types of industrial furnace for heat treatment, forging and sintering.
The third new element, Kanthal Super HT has outstanding high temperature properties in air or oxygen, cycling conditions. Its maximum operating temperature is 1830°C, making it suitable for laboratory and high temperature process furnaces. The special feature of Kanthal Super HT is much reduced and controlled growth of the oxide layer or 'glaze' which leads to a longer element life. Other properties include better hot strength and form stability.
Designed for use in 'clean' process heating, up to 1800°C, in the research and electronic industries, Kanthal Super NC offers minimum scaling of the element surface. The metal content is also reduced which means less diffusion into the furnace atmosphere.
Finally, Kanthal Super LC has an element configuration which creates a higher resistance than ordinary 'U' type elements. As a result, the power system can be designed for elements in series, connected directly to the line voltage and eliminating the need for transformers. Suitable for temperatures up to 1550°C in air/oxidising atmospheres, Kanthal Super LC can be used in most types of industrial furnace at an overall lower cost.
Issued by:
Priority Services Ltd
77 Greenfield Road
Harbome
Birmingham
B17 OEH
UK
Contact: Trevor M Smith
Tel: +44 (0)121 428 1133
Fax: +44 (0)121 428 2363
Email: trevor. smith@priorityservices.co. uk
On behalf of:
Kanthal Bethel
119 Wooster Street
P.O Box 281
06801-0281 Bethel, CT
USA
Tel: 1 203-744 14 40
Fax: 1 203-743 2547
Email : info.bethel@kanthal.se
Internet:www.kanthal.com
|
User comments about this story
Quotation required for high temp. muffle furnace.
Dear Sirs,
We are Indian agents for several companies of Foreign Countries.
We are doing the agency activities
in India.
One of our customers i.e., R and D Unit, India. would like to buy the following products from your end.
We knew that there is Ban for Export to India. If there is no objection or willing to quote the prices, please intimate, we shall send the further details.
Please note that it is a Govt. Organisation, hence, we cannot issue Quotation in Rupee currency. You have to quote the prices and send your Quotation to the Organisation.
If approved or interested to quote the prices, please intimate. The short details of the product is stated below"
1. 1700 deg. Centigrade high Temp. Muffle Furnace using Super Kanthal heating elements. Qnty... 1 No.
2. 1500 deg. Cent. Heating Furnace
Quantity.... 1 No.
3. 1200 deg. -do-
Quantity... 1 No.
The last date for your Quotation will be 4th Dec. 09.
Thanking you,
Yours faithfully,
(K. Satyanarayan )
By Udaya Enterprises, Bangalore, India. on Nov 21, 2009 10:41
Reply to this comment
|
|
|
|
|
|
|
|
| 
