ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

Flow Switch/Monitor accommodates water and wastewater operations.

Print | 
Email |  Comment   Share  
Flow Switch/Monitor accommodates water and wastewater operations.
Flow Switch/Monitor accommodates water and wastewater operations.
Click Here to Enlarge Picture
November 29, 2012 - Model FS10A Analyzer Flow Switch/Monitor is designed for use with tubing from 1/8- in. Able to detect low flow rates, product has no moving parts and can be set up via 2 front panel pushbuttons or PC over integrated RS232C I/O. Unit features 10-LED array, for visual indication of flow rate, and programmable limit alarms. Electronic outputs can include open collector, relay, or 4-20 mA outputs, while electronics can be mounted with device or remotely from sensor element.

FS10A Flow Switch/Monitor for Analyzers and Sampling Systems

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

Fluid Components International
1755 La Costa Meadows Dr.
San Marcos, CA, 92069

Press release date: November 15, 2012

Ideal for Municipal and Industrial Water or Wastewater Applications

San Marcos, CA — Water and wastewater operations and plant engineers in search of a flow switch/monitor to ensure flow to their water or gas sampling systems or analyzers will find their solution in the Model FS10A Analyzer Flow Switch/Monitor from Fluid Components International (FCI). No matter how sophisticated a fluid analyzer system may be, it will be ineffective if a sample flow fails to reach the analyzer sensor. The most advanced systems in the world cannot provide accurate results without a valid fluid sample. That’s why FCI developed the advanced FS10 Analyzer Flow/Switch Monitor.

The FS10A Flow Switch/Monitor is designed for use with tubing from 1/8 inch to inch and the electronics may be either integrally mounted or remote mounted from the sensor element. It is extremely sensitive to low flow rate detection, there are no moving parts to foul or clog, and there are no cavities, orifices or dead-legs to trap or contaminate samples.

FS10A is suitable for application in liquid or gas analyzer sampling systems. It is small, lightweight and features a choice of electronic outputs including open collector, relay and 4-20mA outputs. Limit alarms are also user programmable for time delay and/or hysteresis. An on-board 10-LED array provides at-a-glance visual indication to the user of flow rate and whether the alarm limit has been tripped. All FS10A set-up parameters can be performed via its two front panel push buttons or via a PC over its RS232C I/O. Its exclusive "learn" mode facilitates easy user set-up of flow range zero and span settings.

Water and wastewater end-users and system integrators will find FCI’s FS10A provides a superior overall solution for sampling system and analyzer flow assurance. With its advanced electronics and ultra-reliable thermal dispersion flow sensing technology it will ensure the highest integrity process analysis without interruption.

Fluid Components International is a global company committed to meeting the needs of its customers through innovative solutions to the most challenging requirements for sensing, measuring and controlling flow and level of air, gases and liquids.

Product Information Contact: FCI: 1755 La Costa Meadows Dr., San Marcos, CA 92078

Tel: 800-854-1993
Tel: 760-744-6950
Fax: 760-736-6250

Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
Electrical Equipment and Systems
Sensors, Monitors and Transducers
 More New Product News from this company:
Air/Gas Mass Flow Meter features dual-element averaging.
Multi-Monitor System measures nuclear spent fuel pools.
Air/Gas Flowmeter can be mounted remotely in hazardous areas.
Thermal Mass Flow Meters have NEMA 4X/IP67 rated enclosure.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Froth Flotation Equipment Relies on FCI Flow Meters for Air/Gas Bubble Control to Separate Minerals
Future-Ready ST100 Flow Meter Is SIL Compliant
FCI Future-Ready ST100 Air/Gas Flow Meter at WEFTEC2013
FS10A Analyzer Flow Switch/Monitor Achieves SIL-2 Compliance
FCI FLT93 Series FlexSwitch Provides Reliable Relief Valve and Flare Gas Flow or Leak Detection
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Flow Switches
Flow Monitors
Join the forum discussion at:
Tools of the Trade

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address