Flat Chip Resistor Arrays offer matched tolerances to 0.1%.
Flat Chip Resistor Arrays offer matched tolerances to 0.1%. |
|
|
December 16, 2005 -
Housed in 1.6 x 3.2 mm package, ACAS 0612 Series has absolute TCR down to 25 ppm/K and tracking TCR as low as 10 ppm/K. Available in precision and professional versions, devices offer resistance values from 100 ohm to 221 kohm in numerous configurations including 4 equal, 4 different, or 2 equal value pairs. Each resistance element is rated to 0.1 W dissipation, up to max of 0.3 W per package. Operating voltage is 75 V and max film temperature is 125°C.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Vishay Intertechnology, Inc.
63 Lincoln Hwy., P.O. Box 4004
Malvern, PA, 19355 2143
USA
Vishays New Quad Flat Chip Resistor Arrays in 1.6-mm by 3.2-mm Package Offer Matched Tolerances as Low as 0.1 %
ACAS 0612 Arrays Reduce Footprint by 40% When Used to Replace Four Discrete 0603 Resistors
MALVERN, PENNSYLVANIA - November 23, 2005 - Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it has released new resistor arrays with matched tolerances down to 0.1 %. The arrays combine four thin film resistors into a single package with a footprint of 1.6 mm by 3.2 mm, a 40 % reduction when compared to the use of four discrete 0603 resistors.
The new Vishay Beyschlag ACAS 0612 series resistor arrays are available in both precision and professional versions. They have absolute TCR down to 25 ppm/ K, and tracking TCR as low as 10 ppm/ K. The devices are offered in industry-standard resistance values from 100 ohm to 221 kohm in numerous configurations including four equal, four different, or two equal value pairs. Matched values for applications such as precision voltage dividers are also available from stock.
ACAS 0612 precision resistor arrays deliver high repeatability and stable performance in automotive, industrial and, audio applications. They are suitable for all circuits where designers need close control over the actual resistance present, including feedback circuits, sensing, signal conditioning, measurement bridges, input voltage dividers for analog and digital circuits, and bus terminations.
By reducing component count, ACAS 0612 resistor arrays simplify design and reduce assembly time and complexity, as well as component procurement. Each resistance element is rated to 0.1 W dissipation, up to a maximum of 0.3 W per package. Operating voltage of 75 V and maximum film temperature of 125°C allow designers to benefit from the multi-chip features offered by ACAS 0612 arrays in the majority of applications that demand precision resistors.
The new devices are RoHS-compliant and compatible with tin/lead (Sn/Pb) and lead (Pb)-free soldering processes. Compliance with EU vehicle end of life directives makes the ACAS 0612 series particularly attractive to automotive designers, for sensing and control applications such as automatic drive train controls, precision engine management, and comfort features such as automatic climate control.
In addition to full compliance with these directives, 2000/53/EC End of Vehicle life (ELV) and 2000/53/EC Annex II to End of Vehicle Life (ELV II), the ACAS 0612 series also meets further CEFIC-EECA-EICTA legal restrictions on hazardous substances. These include 2002/95/EC Restriction of the use of Hazardous Substances (RoHS), and 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE). The new arrays are also compatible with conventional Sn/Pb reflow, wave and vapor-phase soldering processes, facilitating migration of existing products to lead (Pb)-free in time for implementation of the RoHS and WEEE directives.
Vishay Intertechnology, Inc., a Fortune 1,000 Company listed on the NYSE (VSH), is one of the world's largest manufacturers of discrete semiconductors (diodes, rectifiers, transistors, and optoelectronics) and selected ICs, and passive electronic components (resistors, capacitors, inductors, and transducers). Vishay's components can be found in products manufactured in a very broad range of industries worldwide. Vishay is headquartered in Malvern, Pennsylvania, and has operations in 17 countries employing over 25,000 people. Vishay can be found on the Internet at http://www.vishay.com.
READER CONTACT INFORMATION
THE AMERICAS
Paulo Adabo
Vishay Americas
2801 Gateway Drive, Suite 110
Irving, TX 75063
U.S.A.
Tel: +1 (972) 871-1852
Fax: +1 (972) 870-9496
paulo.adabo@vishay.com
EUROPE
Volker Waitz
Vishay BCcomponents BEYSCHLAG GmbH
Rungholstrae 8-10
25746 Heide
Germany
Tel: +49 481 95 441
Fax: +49 481 95 204
volker.waitz@bccomponents.com
ASIA/PACIFIC
Victor Goh
Vishay Intertechnology Asia Pte Ltd
25 Tampines Street 92
#02-00 Keppel Building
Singapore 528877
Tel: +65 67807702
Fax: +65 67807896
victor.goh@vishay.com
|
|
|
|
|
|
|
| 
