Product News: Portable Tools, Test & Measuring Instruments, Material Handling & Storage

Electrician's Tool Set is 1,000 V rated.

Share Like Tweet Add Email

Press Release Summary:

March 7, 2012 - Eighty piece master electrician's insulated tool sets are individually tested to 10,000 V for 1,000 V rating. Each tool is tested for puncture penetration and low temperature impact resistance, and insulation is tested for adhesion to tools when kept in temperature of +70°C. Insulating materials are flame retardant to prevent risk from fire or spark over, and water-tight traveling tool box features dedicated tool positions.

WIHA Tools

1348 Dundas Cir., Monticello, MN, 55362, USA

Original Press Release

The Perfect Job Site Solution For Professional Insulated Tools

Press release date: March 6, 2012

Wiha Tools Monticello, Minnesota USA has introduced NEW 1000 Volt 80 piece Master Electrician's Insulated Tool Set. Insulation visually inspected for appearance and integrity. Every tool is tested for puncture penetration & low temperature impact resistance. Insulation is tested for adhesion to make sure it is properly applied to the tools when kept in a temperature of +70° C. The insulating materials are also flame retardant in order to prevent risk from fire or spark over. 10,000 Volt tested, 1000 Volt rated. 80 piece set includes:

Insulated Pliers & Cutters:

  • 2 - Long Nose Pliers (7.9") & (6.3")
  • 1 - Bent Nose Pliers (6.3")
  • 1 - Lineman's Pliers with Crimper (8.9")
  • 1 - Diagonal Cutters (6.3")
  • 1 - High Leverage Cutters (7.9")
  • 1 - Stripping Pliers (6.3")
  • 1 - Cable Cutters (6.3")
  • 1 - Flat Nose Pliers (6.3")
  • 1 - Adjustable Wrench (8.0")

    Insulated Sockets 3/8" Drive:

  • 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 13, 14, 15, 17, 19, 20, 22mm
  • Insulated 3/8" Drive Reversible Ratchet
  • Insulated 3/8" Drive 5" Extension

    Insulated Knife: OAL 8.5"

  • Insulated Single Pole Voltage Detector 110V to 250V
  • Ruler: 78" Fiberglass Filled Job Site Folding Ruler
  • Tool Box: Custom Molded Rolling Tool Box

    Insulated Cushion Grip Drivers:

  • Slotted: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm
  • Phillips: #0, #1, #2, #3
  • Terminal Drivers: #1, #2
  • Square Drivers: #1, #2
  • Inch Nut Drivers: 7/32, 1/4, 5/16, 3/8, 7/16"
  • Metric Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm
  • T-handle Inch Hex: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"
  • T-handle Metric Hex: 4.0, 5.0, 6.0, 8.0mm
  • Hex L-keys: 1/2", 10mm
  • Torx Drivers: T6, T7, T8, T9, T10, T15, T20, T25, T30

    New 40 page catalog of Wiha Insulated products is available - Order catalog #99919.wo

  • Share Like Tweet Add Email

    LIKE THIS ARTICLE? DON’T MISS OUT ON OTHERS! Get Thomasnet’s industry newsletter now

    Comments

    comments powered by Disqus