Diaphragm Action Valve works with UV resins and adhesives.May 25, 2007 -
Suited for dispensing applications, Model DV509-UV-LF features wetted chamber compatible with low- to medium-viscosity UV materials. Diaphragm seal is attached to solenoid that opens upon receiving air signal from valve controller. Diaphragm flexes to allow fluid to exit for duration that seal is opened, and return spring snaps diaphragm shut after air signal is removed. Valve is rated at 200 cycles/min and suited for automated systems.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Fisnar Inc.
15 Corporate Drive, Suite E
Wayne, NJ, 07470
USA
DV509-UV-LF High Duty Diaphragm Valve for UV Resins
UV resins are a diversified range of products. They perform three principal functions: Bonding, Coating, and Sealing.
For many UV resins, polymerization can only be achieved by exposure to UV light. A significant advantage of using these products is that they provide time for assembling components and for making adjustments. Polymerization occurs rapidly after exposure to an intensified UV source.
Since natural sunlight radiates UV rays, the resin has to be protected. Some UV resins are also anaerobic and are sensitive to metal contact, not sufficient to polymerize but enough to gel. The Model DV509-UV-LF is a diaphragm action valve that has been designed for UV resins. The wetted chamber is compatible for low to medium viscosity UV materials. The valve is high cycling, rated at 200 cycles a minute and its lightweight compact design makes it especially suitable for automated systems.
A Diaphragm seal is attached to a solenoid that opens upon receiving an air signal from an I&J Fisnar Inc. valve controller. The diaphragm flexes to allow fluid to exit for the duration that the seal is opened. A return spring snaps the diaphragm shut after the air signal is removed.
The DV509-UV-LF is easy to maintain and is a cost effective solution to dispensing UV resins and adhesives.
For further information on all of our dispensing solutions contact I&J Fisnar Inc.
Tel +1 201-796-1477, Fax +1 201-794-7034, info@ijfisnar.com, www.ijfisnar.com
|
|
|
|
|
|
|
| 
