Count-Up Controllers allow unattended equipment operation.
February 1, 2007 -
Programmable in .01-99.99 sec, 1-9,999 min, or 1-9,999 hr intervals, Model 1 Walkaway(TM) Turn-off Controller counts up and turns any piece of equipment off at end of set time period. Model 2 Walkaway Repeat Turn-on/Turn-off Controller, programmable for 1-99 sec/min/hr intervals, counts up and turns any piece of equipment on for programmed time and off for different programmed time. Repeat feature continues cycling until manually stopped. Both models are NIST Traceable®.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
Control Co.
P.O. Box 58307
Houston, TX, 77258 8307
USA
Traceable® Walkaway(TM) Count-Up Controllers
Control Company's has two new Traceable® Walkaway(TM) Count-up Controllers. Model 1 Walkaway Turn-off Controller counts up and turns any piece of equipment off at the end of a set time period. It is programmable in three interval settings: .01 second to 99.99 seconds; 1 minute to 9999 minutes; or 1 hour to 9999 hours. Model 2 Walkaway Repeat Turn-on/Turn-off Controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat feature automatically continues cycling on and off programmed times until manually stopped. It is programmable for separate on and off timing periods in three interval settings: 1 second to 99 seconds; 1 minute to 99 minutes; and 1 hour to 99 hours.
Controllers perform reproducible stirring, heating, or pumping times. Use for timed shutdown or repeated on/off timing. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Intuitive operation permits setting a program in less than five seconds. Automatic operation allows walking away from the equipment.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Unit's timing accuracy is 0.01%. LCD backlit-display digit height is 1/2 inch. Three-pronged grounded receptacle relay turns on/off apparatus to 120 VAC, 15 amps, 1800 watts, 1/3 horsepower. Red LED indicated the on/off status of attached equipment. Size is 6" x 2 ¾" x 3¼" and weight is 12 ounces. Case is high-impact ABS plastic.
For more information, contact Control Company, 4455 Rex Road, Friendswood, TX 77546; Phone: 281-482-1714; Fax: 281-482-9448; control3.com; E-mail: sales@control3.com.
CONTROL COMPANY IS ISO 9001 QUALITY CERTIFIED by DNV.
CONTROL COMPANY IS ISO 17025 CALIBRATION LABORATORY ACCREDITED by A2LA.
Traceable® is a registered trademark of Control Company.
|
|
|
|
|
|
|
| 
