Buck Regulator features integrated dual power monitor.
May 9, 2008 -
Housed in 4 x 4 mm MLPQ 12-pin package, AS7620 step-down DC-DC converter provides early-power-fail warning and power-good signals to microcontrollers that cannot afford to lose critical data during power failure or brown-out. Available with fixed 3.3 V output or adjustable output between 1.2 V and VIN, hysteretic device features input voltage range of 3.6-32 V. It delivers up to 500 mA with efficiency up to 93%. Unit operates on less than 37 µA when delivering 500 µA of output current.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Original Press release
austriamicrosystems AG
8141 Schloß
Premstatten, ,
Austria
austriamicrosystems Presents AS7620 Industry's First 32V 500mA Buck Regulator With Integrated Dual Power Monitor
AS7620 high voltage buck regulator offers low 30µA quiescent current, high partial load efficiency and 100% duty cycle for maximizing equipment up-time during power-fail conditions
Unterpremstaetten, Austria (May 5, 2008) - austriamicrosystems (SWX: AMS), a leading global designer and manufacturer of high performance analog ICs for communications, industrial, medical and automotive applications, today expanded its DC-DC converter portfolio with the AS7620, a hysteretic, high efficiency 32V step-down regulator in a small 4x4mm MLPQ 12-pin package. Ideally suited to maximize up-time of utility metering, sensor interface and other industrial motion control and battery-powered data-acquisition equipment, the AS7620 provides both, "early-power-fail" warning and "power-good" signals to microcontrollers that cannot afford to lose critical data
during a power failure or brown-out condition.
The AS7620 DC-DC regulator is optimized for industrial 24V applications and delivers up to 500mA. Available with a fixed 3.3V output or adjustable output voltage between 1.2V and VIN, the device features a wide input voltage between 3.6V and 32V and offers a high efficiency rate of up to 93%. Additionally, an integrated 100% duty-cycle
extends operation in low-dropout conditions. A pin-selectable peak current limit optimizes inductor selection, reducing component size. Built on a hysteretic architecture, the AS7620 is a power miser when it comes to minimum and partial load operation, operating on less than 37µA when delivering 500µA of output current and
consuming approximately 100µA at 10mA output, which allows for smaller hold-up capacitors or extends operating battery life for portable analyzers.
"austriamicrosystems' AS7620 is the first in a series of high-voltage step-down converters that addresses the peculiar needs of industrial 24V applications, and is industry's first 32V-stepdown converter to provide simultaneously an early-power-fail warning and power-good signal in a compact, thermally efficient package,
hereby eliminating external comparators and reducing board space" said Matjaz Novak, Marketing Director Industry & Medical at austriamicrosystems. "When the lights go out, the AS7620 shines with its low operating current and extended supply voltage range that includes a low-drop-out mode to keep that microcontroller running until the input voltage falls below the 90% power-good threshold."
The AS7620 DC-DC converter is compatible with a wide range of low profile inductors and ceramic capacitors and does not require compensation. Soft-start, current limit and thermal shutdown make this converter fail-safe. During shutdown the current draw is reduced to only 1µA.
The AS7620 DC-DC converter is available now in a 4x4mm MLPQ 12-pin package and is specified for the industrial temperature range of -40°C to +85°C for ambient conditions. Pricing for the AS7630 is $1.36 each.
Product-specific information and free samples via austriamicrosystems' online shop ICdirect are available at austriamicrosystems.com/03products/AS7620/AS7620.htm
About austriamicrosystems
austriamicrosystems is a leading designer and manufacturer of high performance analog ICs, combining more than 25 years of analog design capabilities and system know-how with its own state-of-the-art manufacturing and test facilities. austriamicrosystems leverages its expertise in low power and high accuracy to provide industry-leading
customized and standard analog products. Operating worldwide with more than 1,100 employees, austriamicrosystems focuses on the areas of power management, sensors & sensor interfaces, portable audio and car access in its markets Communications, Industry & Medical and Automotive, complemented by its Full Service Foundry activities. austriamicrosystems is listed on the SWX Swiss Exchange in Zurich (ticker symbol: AMS).
For further information
Press Contact
austriamicrosystems AG
Ulrike Anderwald
Marketing Communications Manager
Tel: +43 (0) 3136 500 5856
Fax: +43 (0) 3136 500 5420
press@austriamicrosystems.com
www.austriamicrosystems.com
Technical Contact
austriamicrosystems AG
Norbert Wank
Product Manager - Industry/Medical
Tel: +43 (0) 3136 500
Fax: +43 (0) 3136 500 5420
Norbert.wank@austriamicrosystems.com
www.austriamicrosystems.com
|
|
|
|
|
|
|
| 
