N Connectors are designed for RF transmission applications.
October 14, 2009 -
Designed to meet high-speed, low loss applications, 50 W N Connectors are tested and verified from 30 MHz to 6 GHz, with maximum VSWR of 1.25:1. Series consists of 8 male N connectors (plugs) and 8 female N connectors (jacks). Insulators are made of teflon, center contacts are gold-plated, and outer contacts are either silver or nickel-plated. Suitable applications include cell site transmissions, broadcast STLs and RPUs, and wireless microphone diversity antennas.
Belden Unveils New Series of Low Loss 50-ohm N Connectors for a Wide Range of RF Transmission Applications
RICHMOND, Ind., Sept. 23 -- Belden (NYSE:BDC), a world leader in the development of signal transmission products for the broadcast, enterprise, industrial, building management, and security markets, is pleased to introduce a new line of 50-ohm N Connectors. The new series has been specifically designed and engineered to match the performance of Belden's RF Coaxial Cables, which feature ultra-low-loss dielectrics (up to 86 percent velocity) for best attenuation in their respective size categories. These 50-ohm cables are tested and verified from 30 MHz to 6 GHz, with a maximum VSWR of 1.25:1. The cable/N connector combination also meets a maximum VSWR of 1.25:1 (equivalent to a return loss of -19 dB).
Developed specifically to meet the requirements of today's high-speed, low loss applications, the RF Coax Cables and N Connectors can be used in a wide range of RF applications including cell site transmissions, broadcast STLs and RPUs, wireless microphone diversity antennas, two-way radio or life/safety system connectivity, and other RF transmission requirements.
The largest cable/connector combination (RF600 Series and NM600/NF600 Connectors) can carry over 5kW at 30 MHz and more than 300W at 6 GHz, making them ideal for low-power television, back-up transmitters, FM and TV translators and repeaters, microwave transmission, and similar applications.
Belden's 50-ohm N Connector line is comprised of eight (8) Male N Connectors (Plugs) and eight (8) Female N Connectors (Jacks). All eight cable sizes from the miniature RF100A (Part No. 7805) through the massive RF600 (Part No. 7977) have corresponding male and female connectors in stock, which can be ordered using the same basic part number as the cable: for the RF100 cable line, the male N connector is part number NM100; the female N connector is NF100. A Crimp Tool is also available (Part No. RFCT) that provides a full crimp each and every time.
The 50-ohm N Connectors' insulators are made of Teflon , the center contacts are gold-plated, and the outer contacts are either silver or nickel-plated. All other connector parts are nickel-plated bronze with a tarnish-resistant finish.
Most of the RF Cables come in three versions: outdoor (with an A suffix to the part number); riser-rated /indoor (with an R suffix); and direct burial/water protected (with a WB suffix).
For more information about Belden's RF Coaxial Cables and new 50-ohm N Connectors, request New Product Bulletin NP 306. Contact Belden at P.O. Box 1980, Richmond, Indiana 47375, 1.800.BELDEN.1. FAX: 765.983.5294. Or visit our Web site: www.belden.com.
About Belden
Belden is a customer focused company. We ensure that our customers' communications infrastructure issues are resolved and that they benefit from the best signal transmission performance for their investment. We deliver leading-edge copper and fiber cabling/connectivity systems, wireless technologies, and active switch devices. We employ customer-centric go-to-market strategies and we implement and retain world class manufacturing processes. Our partners span the globe, helping our customers design, install, operate and maintain their communications applications. And our experience is vast, including expertise in Enterprise, Industrial, Infrastructure, Transportation, Professional and Enterprise Audio and Video, and Government applications. To obtain additional information contact Investor Relations at 314-854-8054, or visit our website at www.belden.com.
Public Relations:
Adventive Marketing, Inc.
Janet Killen
USA
Phone: 847-590-1110 Company Information: Name: Belden Address: 2200 US Hwy. 27 S. City: Richmond State: IN ZIP: 47375 Country: USA Phone: 800.235.3364 FAX: 765-983-5294 http://www.belden.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
