September 9, 2009 - Measuring over 3.3 in. long and 1.3 in. high, model R525 is capable of outputting up to 5 A peak current and handling up to 75 Vdc. It can be used with all NEMA 8, 11, and 17 motor motors, and is also compatible with many NEMA 23 and NEMA 34 motors. With built-in RS485 communication, unit offers configurable settings including step resolution, run current, hold current, damping modes, as well as selection of sensing step pulses on rising edge or falling edge.

See related product stories
	DC Motor Driver IC targets automotive markets.
	DC Brush Motor Driver is rated at operating level of 4 A.
	SiC Power Transistor Driver survives high temperatures.
	Single-Chip Inverter suits applications up to 100 W.
	Motor Driver enables camera phone autofocus and zoom.

See more product news in:
	Controls and Controllers

Tools for you
del.icio.us	DIGG
Facebook	Reddit
StumbleUpon	Twitter
Print This Page	E-Mail Story
Watch_Company	Save Story
View Company Profile
Company web site
More news from this company

More Tools and information

Search for suppliers of

Motor Drivers

Join the forum discussion at:

Tools of the Trade

Newsletters

Your Gateway to a Fast Changing World Product News Alerts
	Receive similar stories and other customized news to keep you in the know on the products shaping industry.
	Subscribe Free Today Subscribe View Sample

Industry Market Trends Has Got It
Latest developments Trends Best practices Opinions & Commentary
Get Ahead. Get IMT. Subscribe Free Today Subscribe View Sample

See more related product stories:
	Motion Controller and Driver supports up to 3 axes of motion.
	BLDC Full-Bridge Motor Driver integrates Hall commutation.
	Motion Controller and Driver supports up to 3 axes of motion.
	PWM ICs drive brush and brushless DC motors.
	Motors feature piezoelectric motor driver ASIC.
	Brushless Motor Driver ICs miniaturize under-the-hood designs.
	Stepper Motor Driver delivers multimodal operation.
	Dual DC/Stepper Motor Driver has low-voltage design.
	Isolated, Full-Bridge Driver works with DC, stepper motors.
	Power Modules drive 2-phase switched reluctance motors.
	Brushless DC Motor Driver has integrated Hall element.
	Brushless DC Motor/ Driver Package is fully programmable.
	Motor Pre-driver IC controls fans, blowers, or pumps.
	Piezo Driver generates its own high voltage.
	Microstepping Driver complies with RoHS standards.
	Dual 2 kW H-Bridge Driver works with 4I27 and FPGA cards.
	Voice Coil Motor Driver comes with I²C serial interface.
	Brushless DC Motor Pre-Driver suits low current applications.
	Microstepping Drivers comply with RoHS standards.
	Speed Control Package features DC motor and box driver.

Microstepping Driver that Packs a Punch

Santa Clara, CA-August 2009- Lin Engineering, the Step Motor Specialists, are pleased to announce the release of their new R525 microstepping step motor driver. The R525 is designed to help reduce overall design time and system cost for a wide array of step motor applications needing high torque, power, and smooth motion.

The R525 measures just over 3.3" in length and 1.3" in height making it very easy to accommodate in most systems.

The R525 has been extremely competitively priced coming in at almost 20-30% less than similar products. With the R525, you get a lot more than you pay for.

The R525 is capable of outputting up to 5 amps peak current and handling up to 75 volts DC. Not only can it be used with all NEMA 8, 11, and 17 motor motors, it is compatible with the majority of NEMA 23 motors and many NEMA 34 motors as well.

Configuring the R525 unit is simple as well. With built-in RS485 communication, the unit can be easily connected to a computer and configured via Lin Engineering's graphical user interface (GUI), LinDriver. Configurable settings include, but are not limited to:

o Step resolution
o Run current
o Hold current
o Damping modes for smoother motion
o Selection of sensing the step pulses on the rising edge or falling edge

Please visit the company website at www.linengineering.com for more technical specifications as well as the downloadable R525 manual.

Company Information:
Name: Lin Engineering
Address: 1990 Russell Ave.
City: Santa Clara
State: CA
ZIP: 95054
Country: USA
Phone: 408-919-0200
FAX: 408-919-0201
http://www.linengineering.com

More New Product News from this company:
	Microstepping Driver/Controller handles 12-40 Vdc of input.
	Step Motor is RoHS compliant.
	Microstepping Driver/Controller is RoHS-compliant.
	Microstepping Driver complies with RoHS standards.
	Microstepping Drivers comply with RoHS standards.
	Brushless DC Motors operately smoothly at high speeds.
	Step Motor combines multiple components in compact body.
	Step Motor incorporates microstepping drive and controller.
	Intelligent Motor produces up to 85 oz-in. holding torque.

Other News from this company:
	Smoothen out Step Motor Performance with Dampers
	Lin Engineering: Designer's Corner Plus
	SilverPak 23D Now RoHS Compliant and Available with Configuration Module
	Lin Engineering, the Step Motor Specialists, Are Pleased to Introduce Lin Control
	Smoothen Out Step Motor Performance with NEMA 17 Dampers
	Lin Engineering's Designer's Corner: Step Motor Selection Made Easy

Brought to you by Thomasnet.com Browse ThomasNet Directory

News provided by ThomasNet News^® (TNN). TNN is a comprehensive source of new and timely product information in the industrial marketplace. TNN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace. For press release submissions please go to http://news.thomasnet.com/submitpr.html. BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE AGREEMENT.

Microstepping Motor Driver can be configured via computer.

Microstepping Driver that Packs a Punch

Post a comment about this story