May 28, 2009 -
Designed to mount in Y direction of mid-size VMC, TR160Y dual-axis trunnion rotary table measures less than 25 in. wide and 20 in. deep, and fits on one end of machine's table. It has 160 mm T-slot platter, and will swing parts up to 7.5 in. dia. Trunnion provides ±120° of tilt and 360° of rotation for full simultaneous 5-axis motion, or to position parts to any angle. Powerful brushless servomotors on both axes of TR160Y provide 150 ft-lb of torque on A axis and 100 ft-lb of torque on B axis.
Compact Trunnion Rotary Table from Haas Automation
May, 2009
Oxnard, CA - Five-axis machining is becoming more common today as a means to reduce set-up time and increase accuracy for complex parts. But investing in a 5-axis machine tool can be prohibitively expensive, especially for smaller shops.
The new TR160Y dual-axis trunnion rotary table from Haas Automation puts 5-axis capabilities well within reach of the average job shop, and its compact size provides greater mounting flexibility.
The TR160Y is designed to mount in the Y direction (front to back on the table) of a mid-size VMC. At less than 25" wide and only 20" deep, the TR160Y easily fits on one end of the machine's table, freeing up the remainder for additional fixtures or vises. The TR160Y has a 160 mm T-slot platter, and will swing parts up to 7.5" diameter. The maximum platter capacity is 80 lb. The trunnion provides ±120 degrees of tilt and 360 degrees of rotation for full simultaneous 5-axis motion, or to position parts to almost any angle for machining. Yet, like all Haas rotary tables, it can easily be removed when not needed.
Powerful brushless servomotors on both axes of the TR160Y provide 150 ft-lb of torque on the A axis and 100 ft-lb of torque on the B axis. Brake torque is 300 ft-lb and 100 ft-lb respectively, and speeds are 130 deg/sec on the rotary axis and 100 deg/sec on the tilt axis. The trunnion's precision-ground platter of heat-treated 4140 alloy steel has six standard 5/8" T-slots equally spaced at 60 degrees for easy fixturing. Three servo-control configurations are available, making the TR160Y easy to interface to almost any machine.
Built in the USA by Haas, the TR160Y is backed by the worldwide network of Haas Factory Outlets - the most extensive system of support and service in the industry. For more information about Haas and Haas products, call 800-331-6746, or visit www.HaasCNC.com.
About HAAS Automation:
The world's leading CNC machine tool builder, Haas Automation manufactures a full line of CNC vertical and horizontal machining centers, CNC lathes, rotary tables and 5C indexers. Haas machine tools and rotary products are built to deliver higher accuracy, repeatability and durability than any other machine tools on the market.
From its beginnings in 1983, Haas Automation has always produced top-quality products at affordable prices. By relying on volume sales rather than per-unit profits to build the company, Haas delivers more standard features, high-tech innovations and rock-solid engineering than perhaps any other CNC manufacturer in the world - and at better prices!
Contact:
Scott Rathburn
Marketing Product Manager
Phone: (805)988-6922
E-Mail: srathburn@haascnc.com
Contacts:
Marketing:
Scott Rathburn Marketing Product Manager
USA
Phone: 805-988-6922 E-mail this person Company Information: Name: Haas Automation, Inc. Address: 2800 Sturgis Ave. City: Oxnard State: CA ZIP: 93030 Country: USA Phone: 800-331-6746 FAX: 805-278-8540 http://www.haasCNC.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
