Tempco Electric Heater Corporation Designs and Manufactures Heating Elements, Temperature Sensors and Controls, and Turnkey Process Heating Systems. Thousands of products including accessory items are available from stock. Request our 864 page Visionary Solution catalog for product and engineering information.
High Voltage Power Amplifier offers wide bandwidth.
High Voltage Power Amplifier offers wide bandwidth.
June 3, 2009 -
Suited for piezoelectrics, electro-optics, and MEMS applications, Model PZD350A provides large signal bandwidth of 250 kHz and small signal bandwidth greater than 350 kHz. It offers high speed and precise control of DC or peak AC output voltages in programmable ranges of 0 to ±350 V with output current range of 0 to ±200 mA (bipolar model) and 0 to ±700 V with ±100 mA (unipolar model). CE marked unit provides full four-quadrant, class AB, all-solid-state output stages.
Trek's New High Voltage Amplifier Offers Unique Combination of Capabilities
Model PZD350A Offers Wide Bandwidth and Addresses Need for High Speed and Precise Control of Output Voltages; Important in Piezoelectrics, Electro-optics, MEMS
20 May 2009 (Medina, NY) - TREK, INC., a designer and manufacturer of high-voltage power amplifiers and high-performance electrostatic instrumentation, has introduced a new High Voltage Power Amplifier - Trek Model PZD350A - which offers wide bandwidth and additional features important in piezoelectrics, electro-optics, MEMS and other applications. Compared to other linear amplifiers in the marketplace this new model from Trek offers a unique combination of capabilities which enhance its versatility and utility.
The wide bandwidth of Model PZD350A, for both large signal and small signal levels, in combination with Trek's industry-leading technology for precise control of output voltages, enable the PZD350A HV amplifier to address the specific need for high speed and fast settling when driving capacitive loads in piezoelectric driving/control, electro-optics, MEMS and other demanding applications such as laser modulation and ion beam control.
The PZD350A provides a large signal bandwidth of 250 kHz (-3dB) and a small signal bandwidth greater than 350 kHz (-3dB). This bandwidth capability is especially important in new piezo and piezo-stack applications, which require the high current levels as provided by this new amplifier from Trek. The fully protected output of Model PZD350A enhances the utility of this unit in piezo and other reactive load applications by assuring that the amplifier is safe-guarded from incidental short circuits, arcing or energy return from the load device.
The PZD350A design offers outstanding DC stability, high speed and precise control of output voltages (DC or peak AC) in the programmable ranges of 0 to ±350 V with an output current range of 0 to ±200 mA (bipolar model); 0 to +700 V with ±100 mA (unipolar model); 0 to -700 V with ±100 mA (unipolar model). An alternative PZD350A "M/S" design offers twice the current capability of the standard PZD350A models.
The industries and commercial applications that will benefit from the advancements enabled by Model PZD350A are diverse and include: aerospace, biotechnology, defense, military, power, energy, laboratory, instrumentation, semiconductors, electronics, and others.
Like all Trek amplifiers, this High Voltage Amplifier Model PZD350A offers: DC stability, wide bandwidth, well-regulated and controlled AC output signals, and full four-quadrant, class AB, all-solid-state output stages. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This is essential for achieving the accurate output response and high slew rates demanded by reactive loads.
Other technical parameters for the Model PZD350A include DC accuracy better than 0.1% of full scale and slew rate greater than 500 V/µs (±350 V range) or 350 V/µs (700 V range). The unit has precision voltage and current monitors. It is also CE marked.
TREK, INC. (est. 1968) is a privately held company that designs, manufactures and sells high performance electrostatic measurement instruments, sensors & monitors, and high voltage amplifiers, power supplies & generators. Trek's products are used by OEMs involved in semiconductor manufacturing and electrophotography; in applications sensitive to electrostatic discharge (ESD); and by companies and universities involved in a wide variety of research applications, including electrostatics, electrophotography, piezoelectrics, electrohydrodynamics, and plasma chemistry. Customers include numerous Fortune 500 companies and leading universities.
For more information call 585-798-3140 or go to www.trekinc.com.
Contacts:
Marketing:
Mary Spohn
USA
Phone: 585-798-3140 E-mail this person Company Information: Name: Trek, Inc. Address: 11601 Maple Ridge Rd. City: Medina State: NY ZIP: 14103 9710 Country: USA Phone: 800-367-8735 FAX: 716-798-3106 http://www.trekinc.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
