Network Interface Card adapts to real-time Ethernet systems.
March 4, 2009 -
Designed to fit into standard 32-pin Dual-In-line (DIL) socket, netIC series interchangeable module provides network slave connectivity for EtherNet/IP, DeviceNet, PROFIBUS, PROFINET, EtherCAT, PowerLink, SERCOS III, and CANopen. It includes two Ethernet transceivers, and exchanges data with host controller via serial communications using Modbus RTU protocol. RoHS compliant product features netX 50 processor, 8 MB SDRAM memory, and operating temperature of -20 to 70°C.
Hilscher Releases the netIC, a Highly Flexible Single Chip Module Adaptable to All Real-Time Ethernet Systems
February 2009 - Hilscher North America Inc. is pleased to announce the release of the netIC, a network interface module designed to fit into a standard 32-pin Dual-In-line [DIL] socket. Based on Hilscher's netX technology, the netIC is a series of interchangeable modules that provide network slave connectivity for: EtherNet/IP, DeviceNet, PROFIBUS, PROFINET, EtherCAT, PowerLink, SERCOS III and CANopen. For the Ethernet protocols with integrated switch or hub functions, netIC has these features built in including two Ethernet transceivers.
The netIC exchanges data with the host controller via serial communications using the widely popular Modbus RTU protocol. On the Modbus RTU side, transmission rates of up to 115 kBits per second can be reached with the netIC. In addition it is possible to replace the Modbus RTU protocol with a custom or proprietary protocol using the gateway task in netIC. Optionally, the netIC can also communicate via the SPI- or I2C serial interfaces where the user data can be transferred with simple read-write commands. For simple applications such as I/O blocks, shift registers can be configured eliminating the need for an additional processor.
Maximum input and output data vary and depend on the network technology being used, values can range anywhere from 0 to 1490 Byte(s). Delivery of the netIC firmware can be provided as Linkable Object or in source code for modification.
To implement the netIC, a simple evaluation board [NIC-EB] is available along with test and configuration software. Separate adapters [NICEB-AIF-DP] are required for fieldbus.
The netIC gives you the full range of all major industrial fieldbus and Real-Time Ethernet networks making your device a highly flexible product.
Processor: netX 50
Memory: 8 MB SDRAM
Displays: System-LED
Serial interfaces: Diagnostic / configuration UART RSX, TXD. Host interface UART with RXD, TXD, RTS. SPI and I2C Master / Slave
Synchronous Serial IO interface: Inputs: Max.1 6x8 Bit shift register, Outputs: Max.1 6x8 Bit shift register
Communication interface: 2 x Ethernet 100 BASE-TX, auto crossover/negotiation
Operating voltage: +3.3V / typ. 400mA
Operating temperature: -20°C - 70°C
Dimensions (L x W x H): 42 x 21 x 15 mm
Emission: EN55011 Class A
Immunity: Surge - IEC 61000-4-5, Burst - IEC 61000-4-4, ESD - IEC 61000-4-2
RoHS: Yes
UL: In preparation
About Hilscher:
The Hilscher group of companies are a 130+ person strong ISO 9001 certified manufacturer of fieldbus products headquartered in Germany with subsidiaries in; Italy, France, Switzerland, Japan, China and new ones and the United States. We offer products with master and slave technology for PROFIBUS, DeviceNet, InterBus, AS-I, ModbusTCP, PROFINET, EtherNet/IP, EtherCAT, SERCOS, SERCOS III, Modbus Plus, Modbus, CANopen, AS-I, ControlNet, etc. Our product architecture is truly scalable with a single driver interface for both masters and slave interfaces of all networks and all form factors. A single configuration tool SYCON.net is used to configure all our products. Drivers are available for all versions of Windows, QNX, Linux, and RTX, VxWorks, etc.. With a Staff of over 130, the Hilscher family of companies are global leaders in field bus technologies.
Marketing:
Philip Marshall
USA
Phone: 630-505-5301 E-mail this person Company Information: Name: Hilscher North America Inc Address: 2443 Warrenville Rd City: Lisle State: IL ZIP: 60532 Country: USA Phone: 630-505-5301 http://www.hilscher.com/
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
