Power Manager and Li-Ion Charger provide digital control.
December 18, 2008 -
Intended for portable USB-powered devices, Model LTC4099 features switching PowerPath(TM) topology that manages power flow between wall adapter or USB port and battery while preferentially providing power to system load. I2C enables programming of parameters as well as read back of system status information. Converting nearly all 2.5 W from USB port to current, switching input stage enables up to 600 mA charge current or 700 mA system load current from 500 mA limited USB port.
High Efficiency I2C USB Power Manager & Li-Ion Charger Provides Digital Control & Status Readback
MILPITAS, CA - December 1, 2008 - Linear Technology Corporation introduces the LTC4099, an autonomous I2C controlled, high efficiency power manager, ideal diode controller and Li-Ion/Polymer battery charger for portable USB powered devices such as media players, digital cameras, PDAs, PNDs and smart phones. Parameters including input current limit, charge current, termination current, and float voltage can be programmed via I2C. The I2C port also allows the user to read back system status information. The LTC4099's switching PowerPath(TM) topology seamlessly manages power flow between a wall adapter or USB port and the device's battery while preferentially providing power to the system load. For automotive, Firewire, or other high-voltage applications, the LTC4099 provides Bat-Track(TM) control of a Linear Technology companion switching regulator, maximizing battery charger efficiency and minimizing power dissipation. With companion chip input voltages ranging up to 38V (60V transients), the LTC4099 provides a seamless transition between USB and higher voltage power sources.
The LTC4099 prevents damage caused by accidental application of high voltage on the USB input with an overvoltage protection (OVP) circuit - protection up to 68V requires only an external NFET/resistor combination. The LTC4099's "instant-ON" operation ensures system load power at plug-in even with a dead battery. Its onboard ideal diode guarantees that ample power is always available to VOUT even if there is insufficient power at the LTC4099's two input pins. The device's ideal diode controller can be used to drive the gate of an optional PFET, reducing the impedance between the load and the battery to 30 mW or less.
The LTC4099's full-featured single-cell Li-Ion/Polymer battery charger allows the load current to exceed the current drawn from the USB port while conforming to USB load specifications. For fast charging, the IC's switching input stage converts nearly all of the 2.5W available from the USB port to current, enabling up to 600mA charge current or 700mA system load current from a 500mA limited USB port. There is also 1.5A charge current available when wall powered. For improved safety margin, an integrated over-temperature battery conditioning circuit can optionally reduce the battery voltage in case both high battery temperature and high battery voltage occur simultaneously. Further, the charger includes thermal limiting, automatic recharge, stand-alone operation with automatic charge termination and fixed duration safety timer, low voltage trickle charging, bad battery cell detection and a thermistor input for temperature-qualified charging. An additional feature of the LTC4099 is a suspend LDO that prevents battery drain when a device is connected to a suspended USB port.
The LTC4099 is housed in an ultra-thin (0.55mm) 20-pin 3mm x 4mm QFN package and is guaranteed for operation from -40°C to 85°C. 1,000-piece pricing starts at 2.80 each.
Summary of Features: LTC4099
Switching Regulator with Bat-Track Adaptive Output Control Makes Optimal Use of Limited Power Available from USB Port to Charge Battery and Power Application
I2C Port for Optimal System Performance and Status Information
Input Overvoltage Protection (up to 68V)
Bat-Track Control of External Step-Down Switching Regulator Maximizes Efficiency from Automotive and Other High Voltage Sources
Instant-On Operation with Low Battery
Ideal Diode Seamlessly Connects Battery when Input Power is Limited
Overtemperature Battery Conditioner
Full Featured Li-Ion/Polymer Battery Charger
1.5A Maximum Charge Current with Thermal Limiting from Wall Adapter
700mA Maximum Current Available to System Load from a 500mA USB Port
Slew Control Reduces Switching EMI
Ultra-Thin (0.55mm) 20-Lead 3mm - 4mm QFN Package
About Linear Technology
Linear Technology Corporation, a manufacturer of high performance linear integrated circuits, was founded in 1981, became a public company in 1986 and joined the S&P 500 index of major public companies in 2000. Linear Technology products include high performance amplifiers, comparators, voltage references, monolithic filters, linear regulators, DC-DC converters, battery chargers, data converters, communications interface circuits, RF signal conditioning circuits, uModule(TM) products, and many other analog functions. Applications for Linear Technology's high performance circuits include telecommunications, cellular telephones, networking products such as optical switches, notebook and desktop computers, computer peripherals, video/multimedia, industrial instrumentation, security monitoring devices, high-end consumer products such as digital cameras and MP3 players, complex medical devices, automotive electronics, factory automation, process control, and military and space systems.
Marketing:
John Hamburger
USA
Phone: 408-432-1900 ext 2419 E-mail this person
General Information:
Doug Dickinson
USA
Phone: 408-432-1900 ext 2233 E-mail this person Company Information: Name: Linear Technology Corp. Address: 1630 McCarthy Blvd. City: Milpitas State: CA ZIP: 95035-7417 Country: USA Phone: 408-432-1900 FAX: 408-434-6441 http://www.linear-tech.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
