AdvancedTCA Chassis is offered in compact horizontal format.
September 2, 2008 -
With rugged steel construction, 19 in. rackmount 2nd Gen 5U Horizontal AdvancedTCA Chassis features side-to-side cooling via plug-in fan trays with dual 170 cfm fans with PWM control, and dual 1,200 W ac power supplies. It has 2nd generation shelf manager with bussed or quasi-radial IPMB (Intelligent Platform Management Bus) routing. Five slot, ATCA backplane offers connectors for pluggability, and full mesh, replicated mesh, and dual star topologies that can be implemented on same unit.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Elma Announces 2nd Gen 5U Horizontal AdvancedTCA Chassis
FREMONT, California, Aug 22, 2008 - Elma Electronic Inc., a global manufacturer of electronic packaging products, has upgraded its 5U AdvancedTCA Chassis with full redundancy, giving the unit high availability features in a compact horizontal format. The system platform offers dual redundant fan trays, shelf managers, and A/C power supply options.
The 2nd Gen 5U AdvancedTCA Chassis features side-to-side cooling via plug-in fan trays with dual 170 CFM fans with PWM (pulse width modulation) control. The redundant push/pull configurations of the fans offer higher levels of reliability. The fans reach the back of the chassis for cooling the rear I/O slots. The 5U chassis offers dual 1200W AC power supplies and dual shelf managers, which are all front pluggable above the card cage. DC power versions are also available.
The 5U ATCA Chassis is a 19" rackmount unit with rugged steel construction. The system platform features a 2nd generation shelf manager with bussed or quasi-radial IPMB (Intelligent Platform Management Bus) routing. A unique 5-slot ATCA backplane provides specially placed connectors for pluggability. Full Mesh, Replicated Mesh, and Dual Star topologies can be implemented on the same backplane. The backplane utilizes the common AMC connector for plugging to Elma's 2nd Gen Shelf Manager. A 6-slot backplane is also optional in certain configurations.
Elma's unique board mating receptacle on the card guides provides secures grounding, accurate alignment and accepts wide tolerances of the alignment pin spacing. Other chassis features include dual On/Off switches on each side of the rear of the enclosure and NEBS-grade washable air filters which are attached via Velcro to the filter trays. For serviceability, the filter tray and fan tray are separately removable.
The lead-time is 4-6 weeks.
About Elma Electronic
Elma Electronic Inc. is a leading manufacturer and supplier of enclosures, backplanes, cabinets, cases, and "ready-to-run" packaging for CPCI, Rugged COTS, VME/64x, VXI, PC and custom bus structures. Elma's component product line offers a wide selection of top quality switches knobs and LED arrays. The company has been a worldwide supplier of dependable, high performance products for over 35 years. Elma operates three facilities in the continental United States plus has locations in Switzerland, Germany, France, the United Kingdom and Israel.
Elma Electronic Inc. is located at 44350 Grimmer Blvd., Fremont, CA 94538 USA. Telephone (510) 656-3400 - Fax (510) 656-3783. www.elma.com
Lorna V. Singh
Marketing Coordinator
P: (510) 656-5829 x 301
F: (510) 656-3783
lorna.singh@elma.com
Company Contact:
Justin Moll,
Elma Electronic
510.656.3400
510.656.3783 fax
e-mail: Justin.moll@elma.com
Contacts:
Marketing:
Lorna V. Singh Marketing Coordinator
USA
Phone: 510-656-5829 ext 301
FAX: 510-656-3783 E-mail this person
General Information:
Justin Moll
USA
Phone: 510-656-3400
FAX: 510-656-3783 E-mail this person Company Information: Name: Elma Electronic Inc. Address: 44350 Grimmer Blvd. City: Fremont State: CA ZIP: 94538 Country: USA Phone: 800-326-5868 FAX: 510-656-8008 http://www.elma.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
