August 25, 2008 -
Fused Selective Coordination Panel is UL67-listed panelboard that uses class CC Ultrasafe(TM) fuse holders with blown fuse indicators (fuses provided separately to suit specific loads during installation). Compact size and removable backpan facilitate installation. Capable of accomodating 12-42 circuits, panel features 100, 200, or 300 A copper main bus, and bonded ground bar and neutral bar with set-screw terminations.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
NEWBURYPORT, Mass. (Aug. 14, 2008) - Ferraz Shawmut, a global leader in the field of circuit protection, announces its Fused Selective Coordination Panels. Recent National Electrical Code® (NEC) changes, implemented in the 2005 code cycle and refined in the 2008 edition, require selective coordination in a number of critical circuits.
The NEC requires selective coordination for Emergency (700.27), Legally Required Standby (701.18), Essential Electrical Systems (517.26) and Critical Operations Power Systems (708.54).
Selective coordination forces the protective device nearest to a fault to trip before any upstream protective device, ensuring that critical loads connected in parallel to the fault are not interrupted. This can be accomplished with circuit breakers or fuses, but fused solutions provide the easiest ways to implement selective coordination and maintain selective coordination during the life of the installation.
Using circuit breakers for selective coordination is more expensive to install. Circuit breakers are also susceptible to modification, risking the loss of selective coordination.
Fused solutions are more cost effective and provide selective coordination with 2:1 ratios, using Ferraz Shawmut Amp-Trap 2000 fuses. The use of fuses in the panel also provides a higher short circuit current rating (SCCR), compared to that of a typical circuit breaker panel, which the market demands.
"As more states adopt the 2008 NEC, consulting-specifying engineers will need to provide selective coordination as part of electrical system designs in new constructions or retrofits of hospitals, office buildings, commercial buildings, critical power applications and similar installations," said Russ Bernstein, product manager of systems and accessories at Ferraz Shawmut. "Using our Amp-Trap 2000 class CC fuses ensures minimal fuse let-thru energies and makes it easy to provide system coordination."
Each Ferraz Shawmut Fused Selective Coordination Panel is a UL67-listed panelboard that uses the market-leading class CC Ultrasafe(TM) fuse holders with easy-to-see blown fuse indicators (fuses provided separately to suit specific loads during installation). The compact size and removable backpan allow for easier installation by contractors.
Features include a bonded ground bar and a neutral bar with set-screw terminations. MLO (main lugs only) terminations include an optional molded case switch. Branch circuit breakers provide circuit isolation, and the panel comes with a 100A, 200A or 300A copper main bus. The panels accommodate 12 to 42 circuits.
For further details and complete product specifications, please send a request to info@ferrazshawmut.com, or visit http://us.ferrazshawmut.com.
Ferraz Shawmut has been a leader in circuit protection for industry and the electrical market for more than 100 years. With a complete line of current-limiting fuses and accessories, Ferraz Shawmut prides itself on delivering innovative, problem-solving products like the Thermally Protected Metal Oxide Varistor (TPMOV), the SmartSpot® open-fuse indicator, Amp-Trap 2000® fuses, ULTRASAFE(TM) fuse holders, Protistor® semiconductor fuses and Select-A-Fuse® software. Two of the company's latest innovations are its new line of Amp-Trap® High-Speed Class J (HSJ) fuses, engineered specifically for the protection of today's sensitive electronic motor controllers, and the industry's first line of Finger-Safe Power Distribution Blocks (FSPDBs), delivering the ultimate in safety and ease-of-use when making power connections in electrical panels. Ferraz Shawmut, Inc. is a subsidiary of the Carbone Lorraine Groupe. For more information, contact the company by phone at (978) 462-6662 or visit http://us.ferrazshawmut.com.
Contacts:
Public Relations:
Carri Gregorski
USA
Phone: 315-413-4286 E-mail this person
General Information:
Stephen Colvin
USA
Phone: 978-465-4870 Company Information: Name: Ferraz Shawmut Address: 374 Merrimac St. City: Newburyport State: MA ZIP: 01950 Country: USA Phone: 978-462-6662 FAX: 978-462-0181 http://us.ferrazshawmut.com
News provided by ThomasNet News® (TNN). TNN is a comprehensive source
of new and timely product information in the industrial marketplace. TNN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
