June 2, 2008 - Offered in single and dual output models, 10 W EW Series converters are housed in 1.25 x 0.8 x 0.4 in. five-sided shielded case. Input voltage ranges available are 9-18 V, 18-36 V, and 36-75 V, while single output voltages range from 2.5-15 V and dual output voltages available are ±5, ±12, and ±15 V. Other features include 87% typical efficiency, 1,500 Vdc input to output isolation voltage, output noise of 50 mV peak to peak, and line and load regulation of 0.3% and 0.5% respectively.

Related categories: Electrical Equipment and Systems

Press Release
Release date: May 23, 2008

Calex Announces the Availability of the Calex 10 Watt EW Series

Compact 10 Watt DC/DC Converter

Calex Mfg. Co., Inc. of Concord, California announces the availability of the Calex 10 Watt EW Series. The 10 Watt DC/DC converters are housed in a 1.25" x 0.8" x 0.4" five sided shielded case. The EW Series offers both single and dual output models. The input voltage ranges available are 9 to 18V, 18 to 36V and 36 to 75V. Single output voltages range from 2.5 to 15V and dual output voltages available are ±5, ±12 and ±15 Volts. All models are isolated input to output.

The switching frequency of the EW Series is 400 kHz. Efficiencies run as high as 87% typical. The input to output isolation voltage is 1500 Volts DC. Output noise is only 50 mV peak to peak. Line and load regulation is 0.3% and 0.5% respectively. Output voltage accuracy is 0.6%. All EW models are protected by continuous short circuit protection and backed by Calex's Five Year Warranty.

The operating case temperature range of the EW Series is -40 to +90C. MTBF is calculated per MIL-HDBK-217F at 1M hours. Contact the factory for pricing. Units are available from stock to 6 weeks.For more information, contact Calex Mfg. Co., Inc. via phone 925-687-4411 / 800-542-3355 or fax 925-687-3333. For a complete data sheet on the EW Single Series go to http://www.calex. com/pdf/10wsew.pdf, EW Dual Series go to http://www. calex.com/pdf/10wdew.pdf or email sales@calex.com. The Calex corporate address is 2401 Stanwell Drive, Concord, California 94520 USA. Calex has manufacturing facilities in both Concord California and Tijuana Mexico.

Contact: Paul Cuff (pcuff@calex.com)
Phone: (925) 687-4411

Contacts:

General Information:
Paul Cuff
USA
Phone: 925-687-4411

E-mail this person

Company Information:
Name: Calex Mfg. Co., Inc.
Address: 2401 Stanwell Dr.
City: Concord
State: CA
ZIP: 94520
Country: USA
Phone: 800-542-3355
FAX: 925-687-3333
http://www.calex.com

Story Tools

Go Back |

E-Mail | Print | Post

	Contact company
	View Company Profile at ThomasNet.com
	Company web site
	More news from this company
	Search for suppliers of: Electric Converters DC To DC Converters Converters
	Join the forum discussion at: Wired In

Related Stories:
Oct 10, 2008	DC/DC Converters come in DIP-24 package.
Oct 1, 2008	Half-Brick DC/DC Converters are fully isolated to 2,250 Vdc.
Oct 1, 2008	Voltage Converters enable DC devices to run on AC power.
Sep 26, 2008	DC-DC Boost Converter offers micro-power consumption.
Sep 19, 2008	DC/DC Converters feature 4:1 input ranges.
Sep 18, 2008	DC/DC Converters offer low enable threshold voltage.
Sep 17, 2008	Half-Brick DC/DC Converters include full protection.
Sep 17, 2008	DC/DC Converters feature 4:1 input range.
Sep 15, 2008	Switch Mode USB PMIC maximizes battery runtime.
Sep 10, 2008	DC-DC Converters feature 72 V input.
Sep 9, 2008	MIL-COTS DC-DC Converters operate from wide input range.
Sep 5, 2008	Synchronous Step-Down DC/DC Controller has wide input range.
Sep 4, 2008	N-Channel MOSFETs perform synchronous DC-DC conversion.
Sep 2, 2008	DC-DC Converter provides 24-26 Vdc of power.
Aug 26, 2008	DC/DC Converter suits space-constrained applications.
Aug 20, 2008	DC/DC Converter meet EN60950-1/EN60601-1 safety standards.
Aug 14, 2008	DC/DC Converter offers 30 W from 2 x 1 in. package.
Aug 12, 2008	DC-DC Converters offer efficiencies exceeding 90%.
Aug 12, 2008	DC/DC Converter is designed for railway applications.
Aug 12, 2008	DC-DC Power Converter operates in severe environments.

More New Product News from this company:
Oct 9, 2008	Summing Transmitter powers up to 4 load cells.
Sep 16, 2008	Analog Transmitter provides 4-20 mA or 0-10 Vdc output.
Sep 11, 2008	Power Modules protect dc/dc converters against power loss.
Jun 25, 2008	Encapsulated Signal Conditioner suits rugged environments.
Mar 25, 2008	Load Sharing Modules efficiently parallel DC/DC converters.
Aug 1, 2007	DC/DC Converters each provide three 10 A outputs.
Jun 25, 2007	DC/DC Converters feature 4:1 input range.
Jun 13, 2007	Signal Conditioners have voltage output range of -3 to +15 V.
May 25, 2005	DC/DC Converter provides quad outputs.
May 25, 2005	Half-Brick DC/DC Converters deliver 100 watts.
May 10, 2005	Linear Power Supply features dual outputs.
Feb 1, 2005	DC/DC Converter produces 5 A output.
Jan 12, 2005	Strain Gage to PLC Converter includes 10 V excitation source.
Nov 22, 2004	DC/DC Converters suit FPGA and DSP applications.
Oct 26, 2004	DC/DC Converters output 30 W.
Nov 26, 2003	DC/DC Converters have 9-36 Vdc and 18-72 Vdc input ranges.
Nov 19, 2003	Signal Conditioner suits strain gage based systems.
Nov 12, 2003	Quarter Brick DC/DC Converter is rated to 75 W.
May 1, 2003	DC/DC Converters offer three output voltages.

Other News from this company:
Mar 05, 2008	New Calex DC/DC and AC/DC Short Form Product Guide for Industrial and COTS Military Applications

Brought to you by Thomasnet.com Browse ThomasNet Directory

News provided by ThomasNet Industrial Newsroom^® (TIN). TIN is a comprehensive source of new and timely product information in the industrial marketplace. TIN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace. For press release submissions please go to http://news.thomasnet.com/submitpr.html. BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE AGREEMENT.