Light Ring is available in 850 or 880 nm center wavelengths.
May 13, 2008 -
RoHS-compliant OPA80 and OPA83 Series near-infrared light sources are available with ring sizes from 0.625 in. ID/1.25 in. OD to 1.25 in. ID/2.25 in. OD. Typical forward voltage is 1.35 VF, reverse voltage per emitter is 2.0 V, with continuous forward current of 50 mA and peak pulsed forward current of 1.0 A at 1% duty cycle. Series OPA80 12 V light ring comes with ambient light sensor to minimize current consumption, while Series OPA83 5 V light ring comes without sensor.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
OPTEK Develops Near-Infrared Light Rings Using Surface Mount and Through-Hole LED Packages
Near-IR light rings offered with ambient light sensor for minimized current consumption.
LAS VEGAS, NV (May 6, 2008) - Providing design engineers with a compact means to illuminate a given area with near-infrared light, TT electronics OPTEK Technology has developed a series of light rings using LEDs with 850nm to 880nm wavelengths. Designated the OPA80 Series and OPA83 Series, the near-infrared wavelength light sources are available in a variety of ring sizes and configurations, and feature an optional ambient light sensing device to minimize current consumption during high ambient light conditions.
"The OPA80 and OPA83 Series light rings were designed to easily illuminate a specific area with infrared light," said Roland Chapa, vice president of OPTEK Technology's Assemblies Business Unit. "With a variety of configurations and sizes, along with the option for reduced current consumption, the light rings are ideal for applications ranging from mood lighting to daylight security camera lighting."
Additional applications for the near-infrared light rings include spot lighting, flash lighting and under-counter lighting.
The near-infrared light ring series includes the OPA80 12V light ring with ambient light sensor; OPA81 12V light ring without sensor; OPA82 5V light ring with ambient light sensor; and OPA83 5V light ring without sensor. Available ring sizes include 0.625" ID/1.25" OD; 1.0" ID/1.75" OD; 1.25" ID/2.0" OD; and 1.5" ID/2.25" OD. LED quantities range from 10 to 24, depending on voltage rating and ring size. LED types include surface mount devices, with a viewing angle of 100°, as well as 3mm through-hole packages with viewing angles of 18°.
The OPA80 and OPA83 Series light rings are available in either 850nm or 880nm center wavelengths. Typical forward voltage for each LED is 1.35VF. Reverse voltage per emitter is 2.0V, with a continuous forward current of 50mA and peak pulsed forward current of 1.0A at 1% duty cycle. Operating temperature ranges from -40°C to
+85°C. Custom mounting, electrical, cabling and connectors are also
available. The light rings are RoHS-compliant.
Typical pricing for the OPA80 and OPA83 Series light rings starts at
$11.75 each in quantities of 1,000. Lead time, if stock is not available, is from 6 to 8 weeks.
For more information about OPTEK's near-infrared light rings, please contact TT electronics' OPTEK Technology at 1645 Wallace Dr., Carrollton, TX, 75006; call 972-323-2200, e-mail at visibleLED@optekinc.com or visit: http://www.optekinc.com/products/opto.asp.
In Europe, contact JP Delaporte at info@optek-europe.com. In Asia, contact T.H. Swee at thswee@optekasia.com or call +852-9190-4641.
OPTEK Technology is a leading manufacturer of standard and application-specific sensors using infrared, visible, magnetic and fiber optic technologies focused on applications in office machines, industrial equipment, encoders, automotive electronics, military and high-reliability applications, and medical diagnostic equipment. Headquartered in Carrollton, TX, the company is
ISO/TS16949:2002 and BS EN ISO 9001:2000 certified, as well as ITAR registered. OPTEK Technology was acquired by TT electronics in December 2003.
TT electronics plc is a global electronics company manufacturing a broad range of advanced electronic components, assemblies and sensor modules for the automotive, industrial, telecommunication, computer and aerospace markets.
For more information, contact:
Bob Procsal, Applications Engineer
OPTEK Technology
972-323-2200
bprocsal@optekinc.com
Keywords: TT electronics, OPTEK, OPA80, OPA83, near-infrared, light ring
Contacts:
Engineering:
Bob Procsal Applications Engineer
USA
Phone: 972-323-2200 E-mail this person
Public Relations:
BtB Marketing Communications, Inc.
Beth Gaddy Public Relations Executive
900 Ridgefield Dr., Suite 270
Raleigh NC 27609
USA
Phone: 919-872-8172
FAX: 919-872-8875 E-mail this person
General Information:
JP Delaporte
USA E-mail this person Company Information: Name: Optek Technology, Inc. Address: 1645 Wallace Dr City: Carrollton State: TX ZIP: 75006-6905 Country: USA Phone: 800-341-4747 FAX: 972-323-2396 http://www.optekinc.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
