Thermal Mass Flow Meter is FM, CSA, and CE approved.
March 14, 2008 -
Made of stainless steel with Hastelloy-C tips, Model ST50 Remote Mount Flow Meter is suited for hazardous and difficult-to-reach areas. Featuring no-moving parts thermal mass flow sensor design, field configurable unit measures air flow from 1-125 sfps, nitrogen from 1-150 sfps, and compressed air from 4-400 sfps. Accuracy is +1% of reading, +0.5% of full scale, with repeatability of +0.5% of reading. It operates over 40-100°F temperature range.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Economical Remote Mount Thermal Mass Flow Meter for Hazardous Areas or Hard to Reach Locations
Wastewater, Chemical Processing, Food/Beverage, Pharmaceutical, Plant Air
San Marcos, CA-March 6, 2008-Process and plant engineers who must remote mount an air/gas flow meter transmitter to avoid hazardous areas or difficult-to-reach, equipment-crowded locations will find the new ST50 Remote Mount Flow Meter from Fluid Components International delivers exceptional performance, installation versatility and economy in air, compressed air or nitrogen and a variety of other processes gases, as well as plant HVAC systems.
Featuring a highly intelligent, no-moving parts thermal mass flow sensor design, the ST50 Remote Mount flow meter measures air flow from 1 to 125 SFPS (0.3 to 38 NMPS), nitrogen from 1 to 150 SFPS (0.3 to 46 NMPS) and compressed air from 4 to 400 SFPS (1.2 to 122 NMPS). Accuracy is +1% of reading, +0.5% of full scale, with repeatability of +0.5% of reading. It operates at temperatures from 40 to 100°F (4 to 38°C).
Remote mount flow meters are ideal in equipment crowded or hazardous plant areas where explosive, flammable or toxic gases may be present near the transmitter's electronics. The ST50's Remote Mount transmitter, which includes a full digital display, can be mounted up to 50 feet (15 meters) away from its thermal mass flow sensor in the process piping and connected via two 0.50-inch FNPT cables.
The rugged ST50 transmitter may be specified with either an 18-36 Vdc or an 85 to 265 Vac input power supply and is housed in an all-aluminum, epoxy-coated enclosure that is NEMA 4X (IP66) rated. It features a digital display with an LCD screen that is user scalable to flow rate units or as 0-100 percent. Approvals include FM, CSA and CE Mark.
The ST50 is also available with built-in wireless IR communication technology via a standard PalmŪ OS PDA. Obtaining measurements, setting changes and reading trouble-shooting codes can be done without ever having to open the instrument or transmitter. This handy feature is ideal for use with flow meters that are remote mounted in hard-to-reach locations or where opening the instrument is inconvenient or labor intensive.
The ST50 Remote Mount is field configurable for flow range in standard mass flow or volumetric engineering units. In addition to the wireless IR I/O, it features dual analog outputs (4-20 mA and 0-10 Vdc), which are field assignable as flow rate or temperature, and an RS232C I/O port. A 0-1kHz pulse output for totalizing flow is also available as an option. All configurations are easily user set in the field with any standard laptop connected to the RS232C port and/or via the wireless IR link/PDA.
Designed for long-life in harsh outdoor installation conditions, the ST50 thermal mass flow sensing element is constructed of stainless steel with Hastelloy-C tips. Its thermal dispersion technology provides direct flow measurement for higher performance at a lower cost by eliminating the need for temperature sensors, flow computers or other devices required with orifice plates, Venturis, Vortex shedding and other meters. This unique design also provides built-in temperature compensation for reliable measurement over a wide temperature range with almost no pressure-drop.
Fluid Components International is a global company committed to meeting the needs of its customers through innovative solutions to the most challenging requirements for sensing, measuring and controlling flow and level of air, gases and liquids.
Product Information Contact:
FCI:
1755 La Costa Meadows Dr,
San Marcos, CA 92078
Public Relations:
Randy Brown
USA
Phone: 909-335-1941 E-mail this person Company Information: Name: Fluid Components International Address: 1755 La Costa Meadows Dr. City: San Marcos State: CA ZIP: 92069 Country: USA Phone: 760-744-6950 FAX: 760-736-6250 http://www.fluidcomponents.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
Twitter
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
