Clock Generator exhibits output jitter as low as 380 femtosec.
June 27, 2007 -
Offered in die form to fit in 5 x 7 mm XO package or 24-pin QFN package, Model CDCE421 operates from single 3.3 V supply in temperature range of -40 to +85°C. XO circuitry with integrated frequency synthesizer supports output frequency range from 10.9-766.7 MHz and from 875.2-1,175 MHz. Other key features include support for crystal or LVCMOS frequencies between 27.35-38.33 MHz, and LVDS output with 100 ohm differential off-chip termination in 10.9-400 MHz frequency range.
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
High-Performance, Fully-Integrated Clock Reduces Design Time and Cost
DALLAS (June 6, 2007) - Texas Instruments (TI) (NYSE: TXN) today introduced a low-phase noise clock generator that provides best-in-class jitter performance at 380 femtoseconds (fs) (rms at 10 kHz to 20 MHz). The device incorporates crystal oscillator (XO) circuitry with a fully-integrated frequency synthesizer supporting a wide output frequency range from 10.9 MHz up to 766.7 MHz and from 875.2 MHz up to 1175 MHz, easing design for customers designing Ethernet, fibre channel, PCI Express and Serial ATA products. (See www.ti.com/CDCE421-pr)
The CDCE421 is available in either its die form to fit in a 5-mm x 7-mm XO package or a 24-pin quad flat no-lead (QFN) package, giving customers flexibility to fit their designs. The new clock device is the first to integrate both on-chip EEPROM and XO circuitry for increased programmability, further simplifying the design by allowing the customer to implement a single device for various frequencies.
All device settings are programmable through a TI proprietary simple serial interface for programming after manufacturing. The device operates in a single 3.3 V supply environment and is characterized for operation in the industrial temperature range from -40C to +85C. Other key features include the following:
o Support for crystal or LVCMOS frequencies between 27.35 MHz and 38.33 MHz
o Low-voltage differential signaling (LVDS) Output, 100-ohm differential off-chip termination, 10.9-MHz to 400-MHz frequency range
o Differential low-voltage positive emitter-coupled logic (LVPECL) Output, 10.9-MHz to 1.175-GHz Frequency Range
o Fully-integrated programmable loop filter from 50 kHz to 400 kHz
o Typical power consumption 240 mW in LVDS mode and 300 mW in LVPECL mode
o Chip-enable control pin
o Electrostatic discharge protection exceeds 2-kV human-body model
o Excellent power supply noise rejection
TI provides a wide selection of timing support devices, both PLL-based and non-PLL-based, to support consumer, communications and memory applications. Information on the complete line of clock products from TI is in the Clocks and Timers Selection Guide, available at www.ti.com/clocks.
Pricing and Availability
The CDCE421 is available now in either a die form or packaged in a 24-pin QFN package and is priced at $7.00 in 1,000-piece quantities.
About Texas Instruments
Texas Instruments Incorporated provides innovative DSP and analog technologies to meet our customers' real world signal processing requirements. In addition to Semiconductor, the company includes the Education Technology business. TI is headquartered in Dallas, Texas, and has manufacturing, design or sales operations in more than 25 countries.
Texas Instruments is traded on the New York Stock Exchange under the symbol TXN. More information is located on the World Wide Web at www.ti.com
Please refer all reader inquiries to: Texas Instruments Incorporated
Semiconductor Group, SC-07105
Literature Response Center
14950 FAA Blvd.
Fort Worth, TX 76155
1-800-477-8924 Company Information: Name: Texas Instruments Inc. / Tiris Division Address: 13020 Floyd Road MS 3626 City: Dallas State: TX ZIP: 75243 Country: USA Phone: 972 917 1462 FAX: 972 917 1440 http://www.tiris.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
