UWB IC is suited for wireless USB device applications.
June 15, 2007 -
Offered in compact 9 x 9 mm QFN plastic package, Model RTU7105 single-chip, all-CMOS solution supports Certified Wireless USB Device Controller and WiMedia Logical Link Control Protocol functionality. It integrates Protocol Adaptation Layers, Media Access Controller, baseband processor, RF transceivers, and USB 2.0 and SDIO interfaces. Integrated radio provides dual-band capabilities with support for WiMedia Band Group 1 (3.168-4.752 GHz) and Band Group 3 (6.336-7.920 GHz).
Realtek Announces Single-Chip CMOS Ultra-Wideband Solution Supporting Certified Wireless USB Device Controller and WiMedia Logical Link Control Protocol
HSINCHU, Taiwan and IRVINE, Calif., May 22 /- Realtek Semiconductor Corp. (Taiwan Stock Exchange: 2379.TW), one of the world's largest IC design houses and a market leader in Ultra-Wideband (UWB) technology, today announced its RTU7105, a highly-integrated, single-chip, all-CMOS solution supporting Certified Wireless USB Device Controller and WiMedia Logical Link Control Protocol functionality. The chip integrates Protocol Adaptation Layers, a Media Access Controller (MAC), a baseband processor, RF transceivers, and USB2.0 and SDIO interfaces. Combining advanced functionality with an ultra-compact form factor, the RTU7105 is suitable for all Wireless USB Device applications, particularly mobile and portable applications where footprint size and power consumption are critical. The RTU7105 single-chip solution offers dramatically lower cost, space, and power consumption compared with the multi-chip solutions prevalent in the industry.
The RTU7105 provides a full array of Certified Wireless USB Device functions, including all transfer types (control, bulk, interrupt, and isochronous), cable and numeric association models, plus a multi-host capability to maintain connection-contexts with up to 16 wireless hosts. With USB2.0 and SDIO 1.2 interfaces, the RTU7105 can function as a Device Wire Adapter, or as a Native Wireless USB Device offering significantly higher system throughput. In addition, the chip's innovative CrossBridge(TM) technology provides an easy migration path to Certified Wireless USB by extending the wired USB2.0 functionality to both wired and wireless USB.
The Media Access Controller is based on WiMedia MAC 1.0 and includes self- beaconing support for Certified Wireless USB. As opposed to devices that implement only directed beaconing, which are limited to Wireless USB functions, WiMedia MAC 1.0 support enables multi-protocol functionality. The RTU7105 supports the most recent version of the WiMedia LLC Protocol (formerly known as WiNet), a protocol that enables IP-over-UWB, offering a flexible, peer-to-peer, high-throughput mode.
In an industry first, the RTU7105 integrated radio provides dual-band capabilities, with support for both WiMedia Band Group 1 (3.168~4.752 GHz) and Band Group 3 (6.336~7.920 GHz). In addition to expanding overall capacity by increasing the available channels, dual-band capability provides greatly increased flexibility to tailor products for specific applications and regulatory regions, and is of particular importance for cell phone applications. The RTU7105 complies with the latest WiMedia PHY 1.1 specification, supporting data rates of 53.3Mbps to 480Mbps within Band Groups 1 and 3, and also implements all mandatory portions of the forthcoming WiMedia PHY 1.2 specification, including three new frequency hopping modes in each Band Group for additional spectrum flexibility. It includes state-of-the-art spectral notching capabilities to accommodate evolving regulatory requirements.
The RTU7105 comes in an ultra-compact 9mm x 9mm Quad Flat No-Lead (QFN) plastic package, and will also be made available in a smaller Chip Scale Package (CSP) form.
"Certified Wireless USB's merging of the proven USB ecosystem with innovative ultra-wideband technology promises to expand the reach of wireless into a vast array of consumer electronics devices, PC peripherals, and handsets," said Alex Chiu, President of Realtek Semiconductor Corp. "With the RTU7105's combination of full functionality with high levels of integration, Realtek seeks to drive rapid market adoption and proliferation of this technology."
"All UWB vendors will eventually have to move to single-chip integration, which will be essential for competitiveness, particularly for the CWUSB Device market," said Brian O'Rourke, senior analyst at In-Stat. "The full-featured and early single-chip RTU7105 places Realtek in a very strong competitive position."
The RTU7105 will be demonstrated at the Realtek booth, located in South Lounge (T3F1) at Computex, Taipei, from June 5-9.
Realtek Semiconductor Corp. is one of the world's leading IC providers. It designs and develops a wide range of IC products for communications network, computer peripheral, and multimedia applications. Products include 10/100/1000M Ethernet Controllers, 10/100/1000M Ethernet Switch/Gateway Controllers, 10/100/1000M Ethernet PHYceivers, Wireless LAN Controllers & AP/Router SoCs, ADSL2+ Chips, VoIP Solutions, Ultra-Wideband Chips, AC'97/High Definition Audio Codecs, Clock Generators, Card Reader Controllers, and LCD Monitor/LCD TV/DTV Controllers. With advanced design expertise in RF, analog, and mixed signal circuits, and with strong manufacturing and system knowledge, Realtek offers full-featured, high-performance, and competitive total solutions. More information on Realtek can be found on the website: www.realtek.com.tw.
Source: Realtek Semiconductor Corp.
CONTACT:
Sean Coffey,
+1-415-572-6221,
or coffey@realtek-us.com,
or
Hunter Chen,
+886-3-578-0211 x5289,
or hunter.chen@realtek.com.tw,
both of Realtek Semiconductor Corp.
General Information:
Sean Coffey
USA
Phone: 415-572-6221 E-mail this person Company Information: Name: Realtek Semiconductor Corp. Address: No. 2, Innovation Road II City: Hsinchu Country: Taiwan Phone: http://www.realtek.com.tw
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
