Archive News Story
(Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Connectors suit portable devices such as mobile phones.
June 14, 2007 -
Series SG5, SC2, ST1, and ST2 SD Connectors offer 0.5 A rated current, 500 Vac rms (for 1 min) dielectric withstanding voltage, 100 mW maximum contact resistance, 1,000 mW minimum insulation resistance, -25 to +85°C operating temperature, and 10,000 cycles durability. Series SG5, SC2, and ST2 feature push-push structure, while Series ST1 features push-slide hinge structure. Devices have card insertion detection switch and lock structure to prevent card from falling out.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: May 22, 2007
Mouser Electronics Announces New JAE Connector Series Available
Smaller Size Minimizes Mounting Space for Portable Applications
Mansfield, Texas, USA - May 22, 2007 - Mouser Electronics, Inc., known for rapid new product introduction, today announced it has expanded its JAE connector portfolio to include the new SG5, SC2, ST1, and ST2 Series of SD Connectors and miniSD(TM) memory cards from JAE.
"Both the design engineering community and our suppliers rely on Mouser to supply the newest products available to the marketplace," according to Barry McConnell, Mouser Vice President of Product Marketing, "and by stocking new products like these from JAE, Mouser is able to fulfill its commitment to both suppliers and design engineers alike."
JAE Electronics offers a wide selection of connectors ranging from circular, board-to-board, and wire-to-board, to DIMM memory, memory card, as well as FPC connectors, and is known for its continuous introduction of new products.
Standardized by SDA(TM) (SD Card Association), the SG5, SC2, ST1, and ST2 connectors are ideal for various portable devices such as mobile phones. The SG5, SC2, and ST2 series feature a push-push structure for minimized mounting space and the ST1 series features a push-slide hinge structure. These devices have a card insertion detection switch and a lock structure to prevent the card from falling out.
Requiring ten percent less board space than existing connectors, the SG5 series for SD cards has a hot plug structure wherein two of the nine terminals come in contact with the card pad, as well as a card insertion structure where one terminal comes in contact at insertion. Additional features include automatic mounting with tray, positioning boss at mounting board, and an insertable multimedia card.
The SC2 series of one-piece connectors for the outer terminal of miniSD(TM) cards has high density SMT mounting and well-balanced shield characteristics ensured by four H/D connection points. The series features contact for power with a live-insertion structure and an intermittent discontinuity countermeasure.
The ST1 series of one-piece external connectors is compatible with TransFlash(TM) (microSD(TM)) cards, has a shield characteristic secured by four ground connection points on the hinge cover, and covers the card for drop/shock strength.
Compatible to automatic mounting, the ST2 series has 1mm push stroke and 3.3mm card eject length, a shield characteristic secured by four ground connection points, and a metallic eject bar that ensures the card is ejected.
All four series feature a rated current of 0.5A, dielectric withstanding voltage of 500VACr.m.s. (for 1 minute), maximum contact resistance of 100 milliohms, minimum insulation resistance of 1,000 megohms, an operating temperature of -25˚C to +85˚C, and 10,000 cycles durability.
About Mouser
Mouser Electronics, Inc. is an electronic component distributor, focused on the rapid introduction of new products and technologies to electronic design engineers. Mouser.com features over 825,000 products online from more than 330 manufacturers. Mouser's 1,800+ page catalog is published every 90 days, providing designers with up-to-date data on the components now available for the next generation of electronic devices. Mouser ships globally to over 280,000 customers in 170 countries from its 432,000 sq. ft. state-of-the-art facility in Mansfield, Texas. For more information, visit www.mouser.com.
About JAE
JAE Electronics, Inc., designs, manufactures and markets electronic connectors and aerospace products. Wholly owned by Japan Aviation Electronics Industries, Ltd., Tokyo, Japan (JAE), JAE Electronics, Inc., was established in the United States in 1977. Since that time, JAE Electronics has increased its marketing efforts in the United States and has opened a manufacturing facility in Tualatin, Oregon. For information on the complete line of JAE connector products, visit JAE's comprehensive connector search engine at www.jae-connector.com
or contact
JAE Electronics, Inc.,
142 Technology Drive,
Building 100, Irvine, CA 92618-2430;
Phone: 1-800-JAE-PART (523-7278);
Fax: 949-753-2699;
e-mail: jae@jae.com;
Internet: www.jae.com.
Contacts:
Marketing:
Ellie Rovai Marketing Communications Manager
USA
Phone: 817-804-3857
FAX: 817-804-3803 E-mail this person Company Information: Name: Mouser Electronics Address: 1000 N. Main St. City: Mansfield State: TX ZIP: 76063 Country: USA Phone: 817-804-3888 FAX: 817-804-3899 http://www.mouser.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
